Hi,
On Wed, Aug 11, 2010 at 06:31:35PM +0200, ext Jacob Tanenbaum wrote:
+#define OMAP3_TORPEDO_MMC_GPIO_WP (-EINVAL)
this one isn't used anywhere, why adding it ?
+static struct regulator_init_data omap3logic_vmmc1 = {
+ .constraints = {
+ .name = "VMMC1",
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &omap3logic_vmmc1_supply,
+};
+
+
+
one blank line only.
+ } else {
+ printk(KERN_ERR "%s(): unknown machine type\n", __func__);
+ return;
indentation is wrong.
+ omap2_hsmmc_init(board_mmc_info);
+ /* link regulators to MMC adapters */
+ omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev;
+}
+
+
+
one blank line only.
/* Ensure SDRC pins are mux'd for self-refresh */
-/* omap_cfg_reg(H16_34XX_SDRC_CKE0);
- omap_cfg_reg(H17_34XX_SDRC_CKE1);
- omap_cfg_reg(SDRC_CKE0);
- omap_cfg_reg(SDRC_CKE1); */
this shouldn't even be here in the first place. :-)
--
balbi
DefectiveByDesign.org
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
