From: thara gopinath <[email protected]>
This patch series introduces smartreflex and voltage driver support
for OMAP3430 and OMAP3630. SmartReflex modules do adaptive voltage
control for real-time voltage adjustments.
Originally all the functionalities introduced in this patch
were present in arch/arm/mach-omap2/smartreflex.c file in Kevin's
pm tree. This patch series does a major rewrite of this file
and introduces a separate voltage driver. Major contributors
to the original driver are
Eduardo Valentin (1):
OMAP3: PM: SmartReflex: Fix scheduled while atomic problem
Kalle Jokiniemi (1):
OMAP3: PM: SmartReflex driver integration
Kevin Hilman (2):
temp: SR: IO_ADDRESS conversion
OMAP: SR: OPP interfaces removed from OMAP PM layer
Nishanth Menon (1):
omap3: pm: sr: replace get_opp with freq_to_opp
Paul Walmsley (2):
OMAP SR: use opp_find_opp_by_opp_id()
OMAP SR: use OPP API for OPP ID, remove direct access
Phil Carmody (2):
OMAP3: PM: Don't do unnecessary searches in omap_sr_vdd*_autocomp_store
OMAP3: PM: Early exit on invalid parameters
Rajendra Nayak (9):
OMAP3: SR: Fix init voltage on OPP change
OMAP3: SR: Update VDD1/2 voltages at boot
OMAP3: SR: Use sysclk for SR CLKLENGTH calc
OMAP3: SR: Reset voltage level on SR disable
OMAP3: SR: Replace printk's with pr_* calls
OMAP3: SR: Remove redundant defines
OMAP3: SR: Fix SR driver to check for omap-pm return values
OMAP3: PM: Put optimal SMPS stabilization delay
OMAP3: SR: Wait for VP idle before a VP disable
Roger Quadros (4):
OMAP3: PM: Fix Smartreflex when used with PM_NOOP layer
OMAP3: PM: Make Smartreflex driver independent of SRF
OMAP3: PM: Do not Enable SmartReflex if OPP tables not defined
OMAP3: PM: Smartreflex: Fix VDD2 OPP determining logic
Romit Dasgupta (1):
omap: pm: SR: use enum for OPP types
Teerth Reddy (1):
OMAP3: SR: Replace SR_PASS/FAIL,SR_TRUE/FALSE
Tero Kristo (1):
Smartreflex: Avoid unnecessary spam
This patch series is based against origin/opp branch off
Kevin's pm tree which in turn is based off lo-master.
This series will apply against lo-master also but will
break compilation due to lack of opp framework support
on lo-master.
This patch series has been tested on OMAP3430 SDP with the extra five patches
from origin/cpufreq branch off Kevin's pm tree applied. This series
has been tested with with omap3_defconfig with the following
menuconfig options enabled.
System type -> TI OMAP Implementations -> Smartreflex Support
System type -> TI OMAP Implementations ->
Class 3 mode of Smartreflex Implementation
Thara Gopinath (8):
OMAP: PM: Allowing an early init of pm debugfs driver.
OMAP3: PM: Adding voltage driver support for OMAP3
OMAP3: PM: Adding smartreflex driver support.
OMAP3: PM: Adding smartreflex device file.
OMAP3: PM: Adding smartreflex hwmod data
OMAP3: PM: Adding smartreflex class3 driver
OMAP3: PM: Adding T2 enabling of smartreflex support
OMAP3: PM: Adding debug support to Voltage and Smartreflex drivers
arch/arm/mach-omap2/Makefile | 5 +-
arch/arm/mach-omap2/board-3430sdp.c | 2 +
arch/arm/mach-omap2/board-3630sdp.c | 2 +
arch/arm/mach-omap2/board-zoom3.c | 2 +
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 249 +++++
arch/arm/mach-omap2/pm-debug.c | 18 +-
arch/arm/mach-omap2/smartreflex-class3.c | 61 ++
arch/arm/mach-omap2/smartreflex-class3.h | 23 +
arch/arm/mach-omap2/smartreflex.c | 1009 +++++++++++++++++++
arch/arm/mach-omap2/sr_device.c | 185 ++++
arch/arm/mach-omap2/voltage.c | 1275 +++++++++++++++++++++++++
arch/arm/plat-omap/Kconfig | 41 +
arch/arm/plat-omap/include/plat/control.h | 27 +
arch/arm/plat-omap/include/plat/smartreflex.h | 285 ++++++
arch/arm/plat-omap/include/plat/voltage.h | 137 +++
drivers/mfd/twl-core.c | 7 +-
drivers/mfd/twl4030-power.c | 29 +
include/linux/i2c/twl.h | 1 +
18 files changed, 3353 insertions(+), 5 deletions(-)
create mode 100644 arch/arm/mach-omap2/smartreflex-class3.c
create mode 100644 arch/arm/mach-omap2/smartreflex-class3.h
create mode 100644 arch/arm/mach-omap2/smartreflex.c
create mode 100644 arch/arm/mach-omap2/sr_device.c
create mode 100644 arch/arm/mach-omap2/voltage.c
create mode 100644 arch/arm/plat-omap/include/plat/smartreflex.h
create mode 100644 arch/arm/plat-omap/include/plat/voltage.h
--
1.7.1.GIT
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
