Thara Gopinath <[email protected]> writes:
> This patch adds debug support to the voltage and smartreflex drivers.
> This means a whole bunch of voltage processor and smartreflex
> parameters are now visible through the pm debugfs. By default
> only a read of these parameters are permitted. If you need to
> write into them then
> echo 1 > /pm_debug/enable_sr_vp_debug
>
> The voltage parameters can be viewed at
> /pm_debug/voltage/vdd_<x>/<parameter>
> and the smartreflex parameters can be viewed at
> /pm_debug/smartreflex/sr_<x>/<parameter>
>
> where <x> is mpu or core for OMAP3.
>
> Signed-off-by: Thara Gopinath <[email protected]>
> ---
> arch/arm/mach-omap2/pm-debug.c | 13 ++
> arch/arm/mach-omap2/smartreflex.c | 40 ++++++-
> arch/arm/mach-omap2/voltage.c | 164
> ++++++++++++++++++++++++-
> arch/arm/plat-omap/include/plat/smartreflex.h | 1 -
> arch/arm/plat-omap/include/plat/voltage.h | 5 +
> 5 files changed, 216 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
> index fed8da1..b748baa 100644
> --- a/arch/arm/mach-omap2/pm-debug.c
> +++ b/arch/arm/mach-omap2/pm-debug.c
> @@ -31,6 +31,7 @@
> #include <plat/board.h>
> #include <plat/powerdomain.h>
> #include <plat/clockdomain.h>
> +#include <plat/voltage.h>
>
> #include "prm.h"
> #include "cm.h"
> @@ -556,6 +557,16 @@ static int option_set(void *data, u64 val)
> if (option == &enable_off_mode)
> omap3_pm_off_mode_enable(val);
>
> + if (option == &enable_sr_vp_debug && val)
> + pr_notice("Beware that enabling this option will allow user "
> + "to override the system defined vp and sr parameters "
> + "All the updated parameters will take effect next "
> + "time smartreflex is enabled. Also this option "
> + "disables the automatic vp errorgain and sr errormin "
> + "limit changes as per the voltage. Users will have "
> + "to explicitly write values into the debug fs "
> + "entries corresponding to these if they want to see "
> + "them changing according to the VDD voltage\n");
> return 0;
> }
>
> @@ -609,6 +620,8 @@ static int __init pm_dbg_init(void)
> &sleep_while_idle, &pm_dbg_option_fops);
> (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d,
> &wakeup_timer_seconds, &pm_dbg_option_fops);
> + (void) debugfs_create_file("enable_sr_vp_debug", S_IRUGO | S_IWUGO, d,
> + &enable_sr_vp_debug, &pm_dbg_option_fops);
> pm_dbg_main_dir = d;
> pm_dbg_init_done = 1;
>
> diff --git a/arch/arm/mach-omap2/smartreflex.c
> b/arch/arm/mach-omap2/smartreflex.c
> index 1c871ae..bc611d1 100644
> --- a/arch/arm/mach-omap2/smartreflex.c
> +++ b/arch/arm/mach-omap2/smartreflex.c
> @@ -547,8 +547,13 @@ int sr_enable(struct voltagedomain *voltdm, unsigned
> long volt)
> return -ENODATA;
> }
>
> - /* errminlimit is opp dependent and hence linked to voltage */
> - sr->err_minlimit = volt_data->sr_errminlimit;
> + /*
> + * errminlimit is opp dependent and hence linked to voltage
> + * if the debug option is enabled, the user might have over ridden
> + * this parameter so do not get it from voltage table
> + */
> + if (!enable_sr_vp_debug)
> + sr->err_minlimit = volt_data->sr_errminlimit;
>
> /* Enable the clocks */
> if (!sr->is_sr_enable) {
> @@ -812,8 +817,32 @@ static int omap_sr_autocomp_store(void *data, u64 val)
> return 0;
> }
>
> +static int omap_sr_params_show(void *data, u64 *val)
> +{
> + u32 *param = data;
> +
> + *val = *param;
> + return 0;
> +}
> +
> +static int omap_sr_params_store(void *data, u64 val)
> +{
> + if (enable_sr_vp_debug) {
> + u32 *option = data;
> + *option = val;
> + } else {
> + pr_notice("%s: DEBUG option not enabled!\n \
> + echo 1 > pm_debug/enable_sr_vp_debug - to enable\n",
> + __func__);
> + }
> + return 0;
> +}
> +
> DEFINE_SIMPLE_ATTRIBUTE(pm_sr_fops, omap_sr_autocomp_show,
> omap_sr_autocomp_store, "%llu\n");
> +
> +DEFINE_SIMPLE_ATTRIBUTE(sr_params_fops, omap_sr_params_show,
> + omap_sr_params_store, "%llu\n");
> #endif
>
> static int __init omap_smartreflex_probe(struct platform_device *pdev)
> @@ -884,6 +913,13 @@ static int __init omap_smartreflex_probe(struct
> platform_device *pdev)
> dbg_dir = debugfs_create_dir(name, sr_dbg_dir);
> (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUGO, dbg_dir,
> (void *)sr_info, &pm_sr_fops);
> + (void) debugfs_create_file("errweight", S_IRUGO | S_IWUGO, dbg_dir,
> + &sr_info->err_weight, &sr_params_fops);
> + (void) debugfs_create_file("errmaxlimit", S_IRUGO | S_IWUGO, dbg_dir,
> + &sr_info->err_maxlimit, &sr_params_fops);
> + (void) debugfs_create_file("errminlimit", S_IRUGO | S_IWUGO, dbg_dir,
> + &sr_info->err_minlimit, &sr_params_fops);
> +
> #endif
>
> dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__);
> diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
> index cb0fcac..d15c5cb 100644
> --- a/arch/arm/mach-omap2/voltage.c
> +++ b/arch/arm/mach-omap2/voltage.c
> @@ -23,6 +23,7 @@
> #include <linux/io.h>
> #include <linux/clk.h>
> #include <linux/err.h>
> +#include <linux/debugfs.h>
>
> #include <plat/omap-pm.h>
> #include <plat/omap34xx.h>
> @@ -37,6 +38,13 @@
> #define VP_IDLE_TIMEOUT 200
> #define VP_TRANXDONE_TIMEOUT 300
>
> +#ifdef CONFIG_PM_DEBUG
> +static struct dentry *voltage_dir;
> +#endif
> +
> +/* VP SR debug support */
> +u32 enable_sr_vp_debug;
> +
> /* PRM voltage module */
> static u32 volt_mod;
>
> @@ -228,6 +236,73 @@ static inline void voltage_write_reg(u8 offset, u32
> value)
> prm_write_mod_reg(value, volt_mod, offset);
> }
>
> +/* Voltage debugfs support */
> +#ifdef CONFIG_PM_DEBUG
> +static int vp_debug_get(void *data, u64 *val)
> +{
> + u16 *option = data;
> +
> + if (!option) {
> + pr_warning("Wrong paramater passed\n");
> + return -EINVAL;
> + }
> +
> + *val = *option;
> + return 0;
> +}
> +
> +static int vp_debug_set(void *data, u64 val)
> +{
> + if (enable_sr_vp_debug) {
> + u32 *option = data;
> + if (!option) {
> + pr_warning("Wrong paramater passed\n");
> + return -EINVAL;
> + }
> + *option = val;
> + } else {
> + pr_notice("DEBUG option not enabled!"
> + "echo 1 > pm_debug/enable_sr_vp_debug - to enable\n");
> + }
> + return 0;
> +}
> +
> +static int vp_volt_debug_get(void *data, u64 *val)
> +{
> + struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
> + u8 vsel;
> +
> + if (!vdd) {
> + pr_warning("Wrong paramater passed\n");
> + return -EINVAL;
> + }
> +
> + vsel = voltage_read_reg(vdd->vp_offs.voltage);
> + pr_notice("curr_vsel = %x\n", vsel);
> + *val = omap_twl_vsel_to_uv(vsel);
> +
> + return 0;
> +}
> +
> +static int nom_volt_debug_get(void *data, u64 *val)
> +{
> + struct omap_vdd_info *vdd = (struct omap_vdd_info *) data;
> +
> + if (!vdd) {
> + pr_warning("Wrong paramater passed\n");
> + return -EINVAL;
> + }
> +
> + *val = omap_voltage_get_nom_volt(&vdd->voltdm);
> + return 0;
> +}
> +
> +DEFINE_SIMPLE_ATTRIBUTE(vp_debug_fops, vp_debug_get, vp_debug_set, "%llu\n");
> +DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops, vp_volt_debug_get, NULL,
> "%llu\n");
> +DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops, nom_volt_debug_get, NULL,
> + "%llu\n");
> +#endif
> +
> static void vp_latch_vsel(struct omap_vdd_info *vdd)
> {
> u32 vpconfig;
> @@ -480,8 +555,49 @@ static void __init init_voltageprocessor(struct
> omap_vdd_info *vdd)
>
> static void __init vdd_data_configure(struct omap_vdd_info *vdd)
> {
> +#ifdef CONFIG_PM_DEBUG
> + struct dentry *vdd_debug;
> + char name[16];
> +#endif
> if (cpu_is_omap34xx())
> omap3_vdd_data_configure(vdd);
> +
> +#ifdef CONFIG_PM_DEBUG
I'd rather just drop the #ifdefs here and make this conditional on the
existence of 'voltage_dir'. More on this below...
> + strcpy(name, "vdd_");
> + strcat(name, vdd->voltdm.name);
> + vdd_debug = debugfs_create_dir(name, voltage_dir);
> + (void) debugfs_create_file("vp_errorgain", S_IRUGO | S_IWUGO,
> + vdd_debug,
> + &(vdd->vp_reg.vpconfig_errorgain),
> + &vp_debug_fops);
> + (void) debugfs_create_file("vp_smpswaittimemin", S_IRUGO | S_IWUGO,
> + vdd_debug,
> + &(vdd->vp_reg.vstepmin_smpswaittimemin),
> + &vp_debug_fops);
> + (void) debugfs_create_file("vp_stepmin", S_IRUGO | S_IWUGO, vdd_debug,
> + &(vdd->vp_reg.vstepmin_stepmin),
> + &vp_debug_fops);
> + (void) debugfs_create_file("vp_smpswaittimemax", S_IRUGO | S_IWUGO,
> + vdd_debug,
> + &(vdd->vp_reg.vstepmax_smpswaittimemax),
> + &vp_debug_fops);
> + (void) debugfs_create_file("vp_stepmax", S_IRUGO | S_IWUGO, vdd_debug,
> + &(vdd->vp_reg.vstepmax_stepmax),
> + &vp_debug_fops);
> + (void) debugfs_create_file("vp_vddmax", S_IRUGO | S_IWUGO, vdd_debug,
> + &(vdd->vp_reg.vlimitto_vddmax),
> + &vp_debug_fops);
> + (void) debugfs_create_file("vp_vddmin", S_IRUGO | S_IWUGO, vdd_debug,
> + &(vdd->vp_reg.vlimitto_vddmin),
> + &vp_debug_fops);
> + (void) debugfs_create_file("vp_timeout", S_IRUGO | S_IWUGO, vdd_debug,
> + &(vdd->vp_reg.vlimitto_timeout),
> + &vp_debug_fops);
> + (void) debugfs_create_file("curr_vp_volt", S_IRUGO, vdd_debug,
> + (void *) vdd, &vp_volt_debug_fops);
> + (void) debugfs_create_file("curr_nominal_volt", S_IRUGO, vdd_debug,
> + (void *) vdd, &nom_volt_debug_fops);
> +#endif
> }
> static void __init init_voltagecontroller(void)
> {
> @@ -541,8 +657,11 @@ static int vc_bypass_scale_voltage(struct omap_vdd_info
> *vdd,
> vc_cmdval |= (target_vsel << vc_cmd_on_shift);
> voltage_write_reg(vdd->cmdval_reg, vc_cmdval);
>
> - /* Setting vp errorgain based on the voltage */
> - if (volt_data) {
> + /*
> + * Setting vp errorgain based on the voltage. If the debug option is
> + * enabled allow the override of errorgain from user side
> + */
> + if (!enable_sr_vp_debug && volt_data) {
> vp_errgain_val = voltage_read_reg(vdd->vp_offs.vpconfig);
> vdd->vp_reg.vpconfig_errorgain = volt_data->vp_errgain;
> vp_errgain_val &= ~vdd->vp_reg.vpconfig_errorgain_mask;
> @@ -627,8 +746,11 @@ static int vp_forceupdate_scale_voltage(struct
> omap_vdd_info *vdd,
> vc_cmdval |= (target_vsel << vc_cmd_on_shift);
> voltage_write_reg(vdd->cmdval_reg, vc_cmdval);
>
> - /* Getting vp errorgain based on the voltage */
> - if (volt_data)
> + /*
> + * Getting vp errorgain based on the voltage. If the debug option is
> + * enabled allow the override of errorgain from user side.
> + */
> + if (!enable_sr_vp_debug && volt_data)
> vdd->vp_reg.vpconfig_errorgain =
> volt_data->vp_errgain;
> /*
> @@ -811,6 +933,37 @@ void omap_vp_enable(struct voltagedomain *voltdm)
> if (!voltscale_vpforceupdate)
> vp_latch_vsel(vdd);
>
> + /*
> + * If debug is enabled, it is likely that the following parameters
> + * were set from user space so rewrite them.
> + */
> + if (enable_sr_vp_debug) {
> + vpconfig = voltage_read_reg(vdd->vp_offs.vpconfig);
> + vpconfig |= (vdd->vp_reg.vpconfig_errorgain <<
> + vdd->vp_reg.vpconfig_errorgain_shift);
> + voltage_write_reg(vdd->vp_offs.vpconfig, vpconfig);
> +
> + voltage_write_reg(vdd->vp_offs.vstepmin,
> + (vdd->vp_reg.vstepmin_smpswaittimemin <<
> + vdd->vp_reg.vstepmin_smpswaittimemin_shift) |
> + (vdd->vp_reg.vstepmin_stepmin <<
> + vdd->vp_reg.vstepmin_stepmin_shift));
> +
> + voltage_write_reg(vdd->vp_offs.vstepmax,
> + (vdd->vp_reg.vstepmax_smpswaittimemax <<
> + vdd->vp_reg.vstepmax_smpswaittimemax_shift) |
> + (vdd->vp_reg.vstepmax_stepmax <<
> + vdd->vp_reg.vstepmax_stepmax_shift));
> +
> + voltage_write_reg(vdd->vp_offs.vlimitto,
> + (vdd->vp_reg.vlimitto_vddmax <<
> + vdd->vp_reg.vlimitto_vddmax_shift) |
> + (vdd->vp_reg.vlimitto_vddmin <<
> + vdd->vp_reg.vlimitto_vddmin_shift) |
> + (vdd->vp_reg.vlimitto_timeout <<
> + vdd->vp_reg.vlimitto_timeout_shift));
> + }
> +
> vpconfig = voltage_read_reg(vdd->vp_offs.vpconfig);
> /* Enable VP */
> voltage_write_reg(vdd->vp_offs.vpconfig,
> @@ -1104,6 +1257,9 @@ static int __init omap_voltage_init(void)
> return 0;
> }
>
> +#ifdef CONFIG_PM_DEBUG
> + voltage_dir = debugfs_create_dir("voltage", pm_dbg_main_dir);
> +#endif
This also depends on CONFIG_DEBUG_FS.
> if (cpu_is_omap34xx()) {
> volt_mod = OMAP3430_GR_MOD;
> vdd_info = omap3_vdd_info;
> diff --git a/arch/arm/plat-omap/include/plat/smartreflex.h
> b/arch/arm/plat-omap/include/plat/smartreflex.h
> index 8954c86..08f7d07 100644
> --- a/arch/arm/plat-omap/include/plat/smartreflex.h
> +++ b/arch/arm/plat-omap/include/plat/smartreflex.h
> @@ -24,7 +24,6 @@
> #include <plat/voltage.h>
>
> #ifdef CONFIG_PM_DEBUG
> -extern struct dentry *pm_dbg_main_dir;
> extern struct dentry *sr_dbg_dir;
> #endif
>
> diff --git a/arch/arm/plat-omap/include/plat/voltage.h
> b/arch/arm/plat-omap/include/plat/voltage.h
> index fc9778b..c6fe2d6 100644
> --- a/arch/arm/plat-omap/include/plat/voltage.h
> +++ b/arch/arm/plat-omap/include/plat/voltage.h
> @@ -14,6 +14,11 @@
> #ifndef __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
> #define __ARCH_ARM_MACH_OMAP2_VOLTAGE_H
>
> +extern u32 enable_sr_vp_debug;
> +#ifdef CONFIG_PM_DEBUG
> +extern struct dentry *pm_dbg_main_dir;
> +#endif
Ah, now I see where this is included from. This should be part of
the patch that makes this global (PATCH 1/8).
> #define VOLTSCALE_VPFORCEUPDATE 1
> #define VOLTSCALE_VCBYPASS 2
Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
