Hi all, I'm working on a zoom2 dev board (omap34x-II MDP). There is my actual config :
I've built kernel 2.6.35 from git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git and then applied the following patchs : [PATCH 1/2 V7] OMAP: ZOOM2/3&SDP3630: Add display board file for zoom boards <http://marc.info/?l=linux-omap&m=127445506720934&w=2> [PATCH 2/2 V7] OMAP: ZOOM2/3&SDP3630: Add display board file for zoom boards <http://marc.info/?l=linux-omap&m=127445522921326&w=2> [PATCH V6] OMAP: DSS: Add NEC NL8048HL11-01B display panel <http://marc.info/?l=linux-omap&m=127445535621669&w=2> Finally I've enabled DSS and lcd NEC_NL8048HL11 in kernel config file. At this time the kernel boots well, and my LCD backlight turns on but I can't see TUX while booting, and I can't draw anything after logging in. I've checked, the framebuffer device is present and configured with size of 800x480. I've played with sys filesystem like on this wiki, but nothing happened: <http://www.omappedia.org/wiki/Bootargs_for_enabling_display> To enable DSS at boot time, I passed following boot options: vram=10M omapdss.def_disp=lcd Perhaps I've missed something? Thank you in advance. --- Yanick -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
