* Yanick Saugy <[email protected]> [100921 05:13]: > The PIN which controls LCD's reset signal (VGA_nRESET/h_GPIO_96) was not > configured as a GPIO. We had to modify the OMAP MUX, and select this PIN > (CAM_XCLKA) as an output GPIO (OMAP_MUX_MODE4). (kernel 2.6.35) > > Be aware of changing this PIN will probably disable the camera, because > it was previously configured as a camera clock. > > > Signed-off-by: Yanick Saugy <[email protected]>
I'm assuming Tomi is queuing this. Acked-by: Tony Lindgren <[email protected]> > > --- a/arch/arm/mach-omap2/board-zoom2.c 2010-09-15 15:27:05.148399721 +0200 > +++ b/arch/arm/mach-omap2/board-zoom2.c 2010-09-15 14:46:09.792900019 +0200 > @@ -71,6 +71,7 @@ static struct twl4030_platform_data zoom > > #ifdef CONFIG_OMAP_MUX > static struct omap_board_mux board_mux[] __initdata = { > + OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), > { .reg_offset = OMAP_MUX_TERMINATOR }, > }; > #else > @@ -82,6 +83,7 @@ static void __init omap_zoom2_init(void) > omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); > zoom_peripherals_init(); > zoom_debugboard_init(); > + zoom_display_init(OMAP_DSS_VENC_TYPE_COMPOSITE); > } > > static void __init omap_zoom2_map_io(void) > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
