> -----Original Message-----
> From: Rick Bronson [mailto:[email protected]]
> Sent: Tuesday, November 09, 2010 10:24 AM
> To: [email protected]
> Cc: Premi, Sanjeev
> Subject: RE: Mistral AM37x (with AM3715) devel board networking broken
>
> Hi Sanjeev,
>
> Thanks much for the help.
>
> > I tried building the latest on l-o master and was able to
> boot consistently
> > in 4 times I tried. Didn't notice the gpio clock related
> error I noticed in
> > your boot log.
> >
> >
> > U-Boot 2010.09 (Nov 08 2010 - 17:11:45)
> >
> > OMAP3630/3730-GP ES2.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
> > OMAP3 EVM board + LPDDR/NAND
>
> Note that mine is ES1.0 (yours is ES2.0):
>
> OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz, Max CPU Clock 1
> Ghz
>
> Not sure if that's any clue.
>
> Tonight I got the latest stuff:
>
> git clone
> git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-oma
> p-2.6.git
>
> and built it up with:
>
> make omap2plus_defconfig ARCH=arm
>
> And got this
>
> http://www.efn.org/~rick/pub/boot6.log
>
> It's basically the same, I get the 3 warnings and sometimes
> eth0 works
> and sometimes it doesn't. Note that my board works flawlessly with
> the kernel on the SD Card.
>
> What compiler are you using? I tried CodeSourcery
> 2009q1 and 2010q1 with the same results.
[sp] I am mostly using 2009q1; but have use 2010q1 earlier in JUL;
didn't see any issues back then.
>
> How did you configure your u-boot?
[sp] It is default configuration on the u-boot master.
>
> Could you send me your boot up text? Could you send me your
> u-boot.bin (and or your uImage) so I can try it? I might help me
> figure out what's going on.
[sp] Will send offline
~sanjeev
>
> Thanks again.
>
> Rick
> --
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
