Hi,
I've found the problem and below is the fix. It appears your
SMSC9200 is faster than mine ;-) Once in a while mine gets through the
smsc911x_soft_reset() in 100 us but most of the time it takes a full
250 ms.
Rick
--- linux/drivers/net/smsc911x.c.~1~ 2010-11-08 19:53:03.000000000 -0800
+++ linux/drivers/net/smsc911x.c 2010-11-11 12:00:18.000000000 -0800
@@ -791,8 +791,8 @@
return -ENODEV;
}
- SMSC_TRACE(PROBE, "PHY %d: addr %d, phy_id 0x%08X",
- phy_addr, phydev->addr, phydev->phy_id);
+ SMSC_TRACE(PROBE, "PHY %s: addr %d, phy_id 0x%08X",
+ dev_name(&phydev->dev), phydev->addr, phydev->phy_id);
ret = phy_connect_direct(dev, phydev,
&smsc911x_phy_adjust_link, 0,
@@ -1124,11 +1124,11 @@
/* Reset the LAN911x */
smsc911x_reg_write(pdata, HW_CFG, HW_CFG_SRST_);
- timeout = 10;
- do {
- udelay(10);
- temp = smsc911x_reg_read(pdata, HW_CFG);
- } while ((--timeout) && (temp & HW_CFG_SRST_));
+ timeout = 10000; /* this can take up to 1/4 sec */
+ while ((smsc911x_reg_read(pdata, HW_CFG) & HW_CFG_SRST_) && timeout) {
+ udelay(100);
+ timeout--;
+ }
if (unlikely(temp & HW_CFG_SRST_)) {
SMSC_WARNING(DRV, "Failed to complete reset");
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
