Hi, On Fri, 2010-10-15 at 14:46 +0200, ext Felipe Contreras wrote: > So that omap_vram_set_sdram_vram() is called before > omap_vram_reserve_sdram_memblock().
Is this still valid after the latest memblock stuff? I presume it is. I'm not able to test this, and you said you didn't test it, so I'm a bit uneasy about applying =). Tomi > > Signed-off-by: Felipe Contreras <[email protected]> > --- > arch/arm/mach-omap2/board-rx51.c | 9 +++++++-- > 1 files changed, 7 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-rx51.c > b/arch/arm/mach-omap2/board-rx51.c > index a58e8cb..861079b 100644 > --- a/arch/arm/mach-omap2/board-rx51.c > +++ b/arch/arm/mach-omap2/board-rx51.c > @@ -144,17 +144,22 @@ static void __init rx51_init(void) > static void __init rx51_map_io(void) > { > omap2_set_globals_3xxx(); > - rx51_video_mem_init(); > omap34xx_map_common_io(); > } > > +static void __init rx51_reserve(void) > +{ > + rx51_video_mem_init(); > + omap_reserve(); > +} > + > MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") > /* Maintainer: Lauri Leukkunen <[email protected]> */ > .phys_io = 0x48000000, > .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, > .boot_params = 0x80000100, > .map_io = rx51_map_io, > - .reserve = omap_reserve, > + .reserve = rx51_reserve, > .init_irq = rx51_init_irq, > .init_machine = rx51_init, > .timer = &omap_timer, -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
