From: Koen Kooi <[email protected]>
Signed-off-by: Koen Kooi <[email protected]>
---
arch/arm/mach-omap2/board-omap3beagle.c | 27 +++++++++++++++++++++++----
1 files changed, 23 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c
b/arch/arm/mach-omap2/board-omap3beagle.c
index f1a8ede..9c9bd96 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -297,12 +297,31 @@ static int beagle_twl_gpio_setup(struct device *dev,
gpio_request(gpio + 1, "EHCI_nOC");
gpio_direction_input(gpio + 1);
- /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
+ /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
+ * high / others active low) */
gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
- gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
+ gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
+ else
+ gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+
+ /* DVI reset GPIO is different between revisions */
+ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
+ beagle_dvi_device.reset_gpio = 129;
+ else
+ beagle_dvi_device.reset_gpio = 170;
+
+ /* Power on DVI, Serial and PWR led */
+ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+ gpio_request(gpio + 1, "nDVI_PWR_EN");
+ gpio_direction_output(gpio + 1, 0);
+ }
- /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
- gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+ /* Power on camera interface on P7/P8 or DVI on A2 and beyond */
+ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
+ gpio_request(gpio + 2, "CAM_EN");
+ gpio_direction_output(gpio + 2, 1);
+ }
return 0;
}
--
1.6.6.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
