Any comments on this?

Op 7 dec 2010, om 13:40 heeft Koen Kooi het volgende geschreven:

> From: Koen Kooi <k...@dominion.thruhere.net>
> 
> Signed-off-by: Koen Kooi <k...@beagleboard.org>
> ---
> arch/arm/mach-omap2/board-omap3beagle.c |   27 +++++++++++++++++++++++----
> 1 files changed, 23 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c 
> b/arch/arm/mach-omap2/board-omap3beagle.c
> index f1a8ede..9c9bd96 100644
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -297,12 +297,31 @@ static int beagle_twl_gpio_setup(struct device *dev,
>       gpio_request(gpio + 1, "EHCI_nOC");
>       gpio_direction_input(gpio + 1);
> 
> -     /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
> +     /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
> +      * high / others active low) */
>       gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
> -     gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
> +     if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
> +             gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
> +     else
> +             gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
> +
> +     /* DVI reset GPIO is different between revisions */
> +     if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM)
> +             beagle_dvi_device.reset_gpio = 129;
> +     else
> +             beagle_dvi_device.reset_gpio = 170;
> +
> +      /* Power on DVI, Serial and PWR led */
> +     if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
> +             gpio_request(gpio + 1, "nDVI_PWR_EN");
> +             gpio_direction_output(gpio + 1, 0);
> +     }
> 
> -     /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
> -     gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
> +     /* Power on camera interface on P7/P8 or DVI on A2 and beyond */
> +     if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
> +             gpio_request(gpio + 2, "CAM_EN");
> +             gpio_direction_output(gpio + 2, 1);
> +     }
> 
>       return 0;
> }
> -- 
> 1.6.6.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to