Hi Aaro,

A couple of small comments below, otherwise looks nice to me.

Jamie

On Thu, Dec 09, 2010 at 06:39:24PM +0200, Aaro Koskinen wrote:
> Add minimal support for Nokia RM-680 board.
> 
> Tested with omap2plus_defconfig.
> 
> Signed-off-by: Aaro Koskinen <[email protected]>
> ---
[...]
> +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
> +     defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
> +static struct omap_onenand_platform_data board_onenand_data[] = {
> +     {
> +             .gpio_irq       = 65,
> +             .flags          = ONENAND_SYNC_READWRITE,
> +     }
> +};
> +#endif
> +
> +/* eMMC */
> +static struct omap2_hsmmc_info mmc[] __initdata = {
> +     {
> +             .name           = "internal",
> +             .mmc            = 2,
> +             .caps           = MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED,
> +             .gpio_cd        = -EINVAL,
> +             .gpio_wp        = -EINVAL,
> +     },
> +     { /* Terminator */ }
> +};
> +
> +static void __init rm680_peripherals_init(void)
> +{
> +     platform_add_devices(rm680_peripherals_devices,
> +                             ARRAY_SIZE(rm680_peripherals_devices));
> +     rm680_i2c_init();
> +     gpmc_onenand_init(board_onenand_data);
What happens if CONFIG_MTD_ONENAND_OMAP2=n and 
CONFIG_MTD_ONENAND_OMAP2_MODULE=n? Do you need to define board_onenand_data to 
NULL if these aren't enabled?

> +     omap2_hsmmc_init(mmc);
> +}
> +
> +static void __init rm680_init_irq(void)
> +{
> +     struct omap_sdrc_params *sdrc_params;
> +
> +     sdrc_params = nokia_get_sdram_timings();
> +     omap2_init_common_hw(sdrc_params, sdrc_params);
> +     omap_init_irq();
> +     omap_gpio_init();
> +}
> +
> +#ifdef CONFIG_OMAP_MUX
> +static struct omap_board_mux board_mux[] __initdata = {
> +     { .reg_offset = OMAP_MUX_TERMINATOR },
> +};
> +#endif
> +
> +static struct omap_musb_board_data rm680_musb_data = {
> +     .interface_type = MUSB_INTERFACE_ULPI,
> +     .mode           = MUSB_PERIPHERAL,
> +     .power          = 100,
> +};
> +
> +static void __init rm680_init(void)
> +{
> +     omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
The same here as with the onenand data.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to