> -----Original Message----- > From: [email protected] [mailto:linux-omap- > [email protected]] On Behalf Of Shilimkar, Santosh > Sent: Friday, February 25, 2011 11:41 AM > To: [email protected] > Cc: Hilman, Kevin; Sripathy, Vishwanath; Shilimkar, Santosh > Subject: [PATCH 2/3] omap: cpufreq: Split omap1 and omap2plus cpufreq > drivers. > > This patch is an attempt to cleanup the #ifdeferry in the > omap cpufreq drivers. > > The split betwenn omap1 and omap2plus is logical because Typo: between
> - omap1 doesn't support opp layer. > - omap1 build is seperate from omap2plus. > > Signed-off-by: Santosh Shilimkar <[email protected]> > Cc: Kevin Hilman <[email protected]> > Cc: Vishwanath BS <[email protected]> > --- > arch/arm/mach-omap1/Makefile | 3 + > .../cpu-omap.c => mach-omap1/omap1-cpufreq.c} | 70 +++++---------- > - > arch/arm/mach-omap2/Makefile | 3 + > .../cpu-omap.c => mach-omap2/omap2plus-cpufreq.c} | 87 +++++++++------ > ----- > arch/arm/plat-omap/Makefile | 1 - > 5 files changed, 67 insertions(+), 97 deletions(-) > copy arch/arm/{plat-omap/cpu-omap.c => mach-omap1/omap1-cpufreq.c} (74%) > rename arch/arm/{plat-omap/cpu-omap.c => mach-omap2/omap2plus-cpufreq.c} > (76%) > > diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile > index 6ee1950..02b80f5 100644 > --- a/arch/arm/mach-omap1/Makefile > +++ b/arch/arm/mach-omap1/Makefile > @@ -11,6 +11,9 @@ obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o > obj-$(CONFIG_OMAP_MPU_TIMER) += time.o > obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o > > +# CPUFREQ driver > +obj-$(CONFIG_CPU_FREQ) += omap1-cpufreq.o > + > # Power Management > obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o > > diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/mach-omap1/omap1- > cpufreq.c > similarity index 74% > copy from arch/arm/plat-omap/cpu-omap.c > copy to arch/arm/mach-omap1/omap1-cpufreq.c > index 1c1b80b..64faf3f 100644 > --- a/arch/arm/plat-omap/cpu-omap.c > +++ b/arch/arm/mach-omap1/omap1-cpufreq.c > @@ -1,5 +1,5 @@ > /* > - * linux/arch/arm/plat-omap/cpu-omap.c > + * OMAP1 cpufreq driver > * > * CPU frequency scaling for OMAP > * > @@ -27,31 +27,18 @@ > #include <linux/io.h> > #include <linux/opp.h> > > -#include <mach/hardware.h> > -#include <plat/clock.h> > #include <asm/system.h> > > -#if defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE) > +#include <plat/clock.h> > #include <plat/omap-pm.h> > -#include <plat/common.h> > -#endif > + > +#include <mach/hardware.h> > > #define VERY_HI_RATE 900000000 > > static struct cpufreq_frequency_table *freq_table; > - > -#ifdef CONFIG_ARCH_OMAP1 > -#define MPU_CLK "mpu" > -#elif defined(CONFIG_ARCH_OMAP3) > -#define MPU_CLK "arm_fck" > -#else > -#define MPU_CLK "virt_prcm_set" > -#endif > - > static struct clk *mpu_clk; > > -/* TODO: Add support for SDRAM timing changes */ > - > static int omap_verify_speed(struct cpufreq_policy *policy) > { > if (freq_table) > @@ -85,13 +72,7 @@ static int omap_target(struct cpufreq_policy *policy, > unsigned int target_freq, > unsigned int relation) > { > -#ifdef CONFIG_ARCH_OMAP1 > struct cpufreq_freqs freqs; > -#endif > -#if defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE) > - unsigned long freq; > - struct device *mpu_dev = omap2_get_mpuss_device(); > -#endif > int ret = 0; > > /* Ensure desired rate is within allowed range. Some govenors > @@ -101,25 +82,22 @@ static int omap_target(struct cpufreq_policy *policy, > if (target_freq > policy->max) > target_freq = policy->max; > > -#ifdef CONFIG_ARCH_OMAP1 > freqs.old = omap_getspeed(0); > freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; > freqs.cpu = 0; > > if (freqs.old == freqs.new) > return ret; > + > cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); > + > #ifdef CONFIG_CPU_FREQ_DEBUG > - printk(KERN_DEBUG "cpufreq-omap: transition: %u --> %u\n", > - freqs.old, freqs.new); > + pr_info("cpufreq-omap: transition: %u --> %u\n", freqs.old, > freqs.new); > #endif > ret = clk_set_rate(mpu_clk, freqs.new * 1000); > - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); > -#elif defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE) > - freq = target_freq * 1000; > - if (opp_find_freq_ceil(mpu_dev, &freq)) > - omap_pm_cpu_set_freq(freq); > -#endif > + if (!ret) > + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); > + > return ret; > } > > @@ -127,7 +105,7 @@ static int __init omap_cpu_init(struct cpufreq_policy > *policy) > { > int result = 0; > > - mpu_clk = clk_get(NULL, MPU_CLK); > + mpu_clk = clk_get(NULL, "mpu"); > if (IS_ERR(mpu_clk)) > return PTR_ERR(mpu_clk); > > @@ -136,13 +114,7 @@ static int __init omap_cpu_init(struct cpufreq_policy > *policy) > > policy->cur = policy->min = policy->max = omap_getspeed(0); > > - if (!cpu_is_omap34xx()) { > - clk_init_cpufreq_table(&freq_table); > - } else { > - struct device *mpu_dev = omap2_get_mpuss_device(); > - > - opp_init_cpufreq_table(mpu_dev, &freq_table); > - } > + clk_init_cpufreq_table(&freq_table); > > if (freq_table) { > result = cpufreq_frequency_table_cpuinfo(policy, freq_table); > @@ -184,7 +156,7 @@ static struct cpufreq_driver omap_driver = { > .get = omap_getspeed, > .init = omap_cpu_init, > .exit = omap_cpu_exit, > - .name = "omap", > + .name = "omap1", > .attr = omap_cpufreq_attr, > }; > > @@ -193,12 +165,12 @@ static int __init omap_cpufreq_init(void) > return cpufreq_register_driver(&omap_driver); > } > > -late_initcall(omap_cpufreq_init); > - > -/* > - * if ever we want to remove this, upon cleanup call: > - * > - * cpufreq_unregister_driver() > - * cpufreq_frequency_table_put_attr() > - */ > +static void __exit omap_cpufreq_exit(void) > +{ > + cpufreq_unregister_driver(&omap_driver); > +} > > +MODULE_DESCRIPTION("cpufreq driver for OMAP1 SOCs"); > +MODULE_LICENSE("GPL"); > +module_init(omap_cpufreq_init); > +module_exit(omap_cpufreq_exit); > diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile > index 1c0c2b0..b1187f9 100644 > --- a/arch/arm/mach-omap2/Makefile > +++ b/arch/arm/mach-omap2/Makefile > @@ -56,6 +56,9 @@ obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o > obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o > endif > > +# CPUFREQ driver > +obj-$(CONFIG_CPU_FREQ) += omap2plus-cpufreq.o > + > # Power Management > ifeq ($(CONFIG_PM),y) > obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o > diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/mach- > omap2/omap2plus-cpufreq.c > similarity index 76% > rename from arch/arm/plat-omap/cpu-omap.c > rename to arch/arm/mach-omap2/omap2plus-cpufreq.c > index 1c1b80b..48da867 100644 > --- a/arch/arm/plat-omap/cpu-omap.c > +++ b/arch/arm/mach-omap2/omap2plus-cpufreq.c > @@ -1,5 +1,5 @@ > /* > - * linux/arch/arm/plat-omap/cpu-omap.c > + * OMAP2PLUS cpufreq driver > * > * CPU frequency scaling for OMAP > * > @@ -27,31 +27,20 @@ > #include <linux/io.h> > #include <linux/opp.h> > > -#include <mach/hardware.h> > -#include <plat/clock.h> > #include <asm/system.h> > +#include <asm/smp_plat.h> > > -#if defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE) > +#include <plat/clock.h> > #include <plat/omap-pm.h> > #include <plat/common.h> > -#endif > + > +#include <mach/hardware.h> > > #define VERY_HI_RATE 900000000 > > static struct cpufreq_frequency_table *freq_table; > - > -#ifdef CONFIG_ARCH_OMAP1 > -#define MPU_CLK "mpu" > -#elif defined(CONFIG_ARCH_OMAP3) > -#define MPU_CLK "arm_fck" > -#else > -#define MPU_CLK "virt_prcm_set" > -#endif > - > static struct clk *mpu_clk; > > -/* TODO: Add support for SDRAM timing changes */ > - > static int omap_verify_speed(struct cpufreq_policy *policy) > { > if (freq_table) > @@ -85,14 +74,8 @@ static int omap_target(struct cpufreq_policy *policy, > unsigned int target_freq, > unsigned int relation) > { > -#ifdef CONFIG_ARCH_OMAP1 > - struct cpufreq_freqs freqs; > -#endif > -#if defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE) > - unsigned long freq; > - struct device *mpu_dev = omap2_get_mpuss_device(); > -#endif > int ret = 0; > + struct cpufreq_freqs freqs; > > /* Ensure desired rate is within allowed range. Some govenors > * (ondemand) will just pass target_freq=0 to get the minimum. */ > @@ -101,33 +84,44 @@ static int omap_target(struct cpufreq_policy *policy, > if (target_freq > policy->max) > target_freq = policy->max; > > -#ifdef CONFIG_ARCH_OMAP1 > freqs.old = omap_getspeed(0); > freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000; > freqs.cpu = 0; > > if (freqs.old == freqs.new) > return ret; > + > cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); > + > #ifdef CONFIG_CPU_FREQ_DEBUG > - printk(KERN_DEBUG "cpufreq-omap: transition: %u --> %u\n", > - freqs.old, freqs.new); > + pr_info("cpufreq-omap: transition: %u --> %u\n", freqs.old, > freqs.new); > #endif > + > ret = clk_set_rate(mpu_clk, freqs.new * 1000); > + if (ret) > + return ret; What about pr_warning() before return? > + > + /* > + * Generic CPUFREQ driver jiffy update is under !SMP. So jiffies > + * won't get updated when UP machine cpufreq build with > + * CONFIG_SMP enabled. Below code is added only to manage that > + * scenario Typo: add '.' at the end. -- Tarun > + */ > + if (!is_smp()) > + loops_per_jiffy = > + cpufreq_scale(loops_per_jiffy, freqs.old, freqs.new); > + > cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); > -#elif defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE) > - freq = target_freq * 1000; > - if (opp_find_freq_ceil(mpu_dev, &freq)) > - omap_pm_cpu_set_freq(freq); > -#endif > + > return ret; > } > > static int __init omap_cpu_init(struct cpufreq_policy *policy) > { > int result = 0; > + struct device *mpu_dev; > > - mpu_clk = clk_get(NULL, MPU_CLK); > + mpu_clk = clk_get(NULL, "cpu_ck"); > if (IS_ERR(mpu_clk)) > return PTR_ERR(mpu_clk); > > @@ -136,13 +130,12 @@ static int __init omap_cpu_init(struct > cpufreq_policy *policy) > > policy->cur = policy->min = policy->max = omap_getspeed(0); > > - if (!cpu_is_omap34xx()) { > - clk_init_cpufreq_table(&freq_table); > - } else { > - struct device *mpu_dev = omap2_get_mpuss_device(); > - > - opp_init_cpufreq_table(mpu_dev, &freq_table); > + mpu_dev = omap2_get_mpuss_device(); > + if (!mpu_dev) { > + pr_warning("%s: unable to get the mpu device\n", __func__); > + return -EINVAL; > } > + opp_init_cpufreq_table(mpu_dev, &freq_table); > > if (freq_table) { > result = cpufreq_frequency_table_cpuinfo(policy, freq_table); > @@ -184,7 +177,7 @@ static struct cpufreq_driver omap_driver = { > .get = omap_getspeed, > .init = omap_cpu_init, > .exit = omap_cpu_exit, > - .name = "omap", > + .name = "omap2plus", > .attr = omap_cpufreq_attr, > }; > > @@ -193,12 +186,12 @@ static int __init omap_cpufreq_init(void) > return cpufreq_register_driver(&omap_driver); > } > > -late_initcall(omap_cpufreq_init); > - > -/* > - * if ever we want to remove this, upon cleanup call: > - * > - * cpufreq_unregister_driver() > - * cpufreq_frequency_table_put_attr() > - */ > +static void __exit omap_cpufreq_exit(void) > +{ > + cpufreq_unregister_driver(&omap_driver); > +} > > +MODULE_DESCRIPTION("cpufreq driver for OMAP2PLUS SOCs"); > +MODULE_LICENSE("GPL"); > +module_init(omap_cpufreq_init); > +module_exit(omap_cpufreq_exit); > diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile > index a4a1285..ec7862e 100644 > --- a/arch/arm/plat-omap/Makefile > +++ b/arch/arm/plat-omap/Makefile > @@ -21,7 +21,6 @@ obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o > obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o > obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-debug.o > > -obj-$(CONFIG_CPU_FREQ) += cpu-omap.o > obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o > obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o > obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o > -- > 1.6.0.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
