* Belisko Marek <[email protected]> [110324 08:18]: > On Thu, Mar 24, 2011 at 4:18 PM, Tony Lindgren <[email protected]> wrote: > > > * Belisko Marek <[email protected]> [110324 02:50]: > > > Hi, > > > > > > Try to run 2.6.38 on my sbc8100 > > > (use mach-type for devkit8000 because boards are similar) board but > > > when u-boot load it to ram I see just: > > > ## Booting kernel from Legacy Image at 80300000 ... > > > Image Name: Linux-2.6.38-06570-g79c21b4 > > > Image Type: ARM Linux Kernel Image (uncompressed) > > > Data Size: 2967164 Bytes = 2.8 MB > > > Load Address: 80008000 > > > Entry Point: 80008000 > > > Verifying Checksum ... OK > > > Loading Kernel Image ... OK > > > OK > > > Starting kernel ... > > > > > > I have changed bootargs to: bootargs=console=ttyO2,115200n8 doesn't > > > help. Any ideas what could be checked? > > > > Can you enable DEBUG_LL and EARLY_PRINTK in your .config > > and add earlyprintk to your cmdline? Then you should see > > what goes wrong. > > > Forgot to mention. I already test this options but result is same like I > report in > first email.
Maybe add some printk statements to start_kernel function in init/main.c and see if you get any output? Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
