Am 08.04.2011 10:03, schrieb Belisko Marek: > On Fri, Apr 8, 2011 at 9:00 AM, Thomas Weber > <thomas.weber.li...@googlemail.com> wrote: >> Am 25.03.2011 08:53, schrieb Belisko Marek: >>> On Fri, Mar 25, 2011 at 8:13 AM, Jarkko Nikula <jhnik...@gmail.com> wrote: >>>> On Thu, 24 Mar 2011 12:00:30 -0700 >>>> Tony Lindgren <t...@atomide.com> wrote: >>>> >>>>> * Belisko Marek <marek.beli...@gmail.com> [110324 08:18]: >>>>>> On Thu, Mar 24, 2011 at 4:18 PM, Tony Lindgren <t...@atomide.com> wrote: >>>>>> >>>>>>> * Belisko Marek <marek.beli...@gmail.com> [110324 02:50]: >>>>>>>> Hi, >>>>>>>> >>>>>>>> Try to run 2.6.38 on my sbc8100 >>>>>>>> (use mach-type for devkit8000 because boards are similar) board but >>>>>>>> when u-boot load it to ram I see just: >>>> ... >>>>>>> Can you enable DEBUG_LL and EARLY_PRINTK in your .config >>>>>>> and add earlyprintk to your cmdline? Then you should see >>>>>>> what goes wrong. >>>>>>> >>>>>> Forgot to mention. I already test this options but result is same like I >>>>>> report in >>>>>> first email. >>>>> >>>>> Maybe add some printk statements to start_kernel function in >>>>> init/main.c and see if you get any output? >>>>> >>>> For earlyprintk worth to check also >>>> arch/arm/plat-omap/include/plat/uncompress.h that there is entry for >>>> sbc8100 (double check with devkit8000 as there is entry for it and if >>>> you are re-using the mach-type). >>> Thanks for hint. It was missing there so I add line: >>> DEBUG_LL_OMAP3(3, devkit8000); (I'm convince linux to use mach-type >>> for devkit8000) >>> But still same result. >>> Bytes transferred = 2898680 (2c3af8 hex) >>> ## Booting kernel from Legacy Image at 80300000 ... >>> Image Name: Linux-2.6.37-00001-g88870c9-dirt >>> Image Type: ARM Linux Kernel Image (uncompressed) >>> Data Size: 2898616 Bytes = 2.8 MB >>> Load Address: 80008000 >>> Entry Point: 80008000 >>> Verifying Checksum ... OK >>> Loading Kernel Image ... OK >>> OK >>> >>> Starting kernel ... >>> >>> Anybody with devkit8000 have success to run 2.6.37 kernel on board?
I run actually 2.6.38. / # uname -a Linux 192.168.250.2 2.6.38-09676-ge63e9ed #8 Tue Mar 22 13:07:44 CET 2011 armv7l GNU/Linux >>>> >>>> -- >>>> Jarkko >>>> >>> >>> regards, >>> >>> marek >>> >> >> Hello Marek, >> >> yes, it is running. But your mach-type is wrong. Thats not the mach-type >> from devkit8000, it is spark. What version of u-boot are you running? > Well my u-boot return different mach-type but I always override it when > kernel start (in arch/arm/kernel/head.S ldr r1,=0x.. mach-type). > But still no luck. What machine-id are you passing in? devkit8000 is 2330 Thomas >> >> Thomas >> >> > > thanks, > > marek > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
