Hi,

 > -----Original Message-----
 > From: ext Sergei Shtylyov [mailto:[email protected]]
 > Sent: 28. maaliskuuta 2011 11:20
 > To: Jokiniemi Kalle (Nokia-MS/Tampere)
 > Cc: [email protected]; [email protected]; [email protected];
 > Krogerus Heikki (Nokia-MS/Helsinki); [email protected]; [email protected]
 > Subject: Re: [PATCH v2 2/2] RX-51: Enable isp1704 power on/off
 > 
 > On 28-03-2011 10:51, Kalle Jokiniemi wrote:
 > 
 > > The isp1704 usb tranceiver is used for charging and can be
 > > disabled when not in use. Provide the powering routine to
 > > the driver via platform data.
 > 
 > > Loosely based on earlier patches from Heikki Krogerus in
 > > Nokia N900 maemo kernel.
 > 
 > > Signed-off-by: Kalle Jokiniemi<[email protected]>
 > > Cc: Heikki Krogerus<[email protected]>
 > > ---
 > >   arch/arm/mach-omap2/board-rx51-peripherals.c |   27
 > ++++++++++++++++++++++++-
 > >   1 files changed, 25 insertions(+), 2 deletions(-)
 > 
 > > diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c
 > b/arch/arm/mach-omap2/board-rx51-peripherals.c
 > > index e75e240..8584dd8 100644
 > > --- a/arch/arm/mach-omap2/board-rx51-peripherals.c
 > > +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
 > [...]
 > > @@ -106,10 +109,30 @@ static struct spi_board_info
 > rx51_peripherals_spi_board_info[] __initdata = {
 > >    },
 > >   };
 > >
 > > +static void rx51_charger_set_power(bool on)
 > > +{
 > > +  gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on);
 > > +}
 > > +
 > > +static struct isp1704_charger_data rx51_charger_data = {
 > > +  .set_power      = rx51_charger_set_power,
 > > +};
 > > +
 > >   static struct platform_device rx51_charger_device = {
 > > -  .name = "isp1704_charger",
 > > +  .name   = "isp1704_charger",
 > > +  .dev    = {
 > > +          .platform_data =&rx51_charger_data,
 > > +  },
 > >   };
 > >
 > > +static void __init rx51_charger_init(void)
 > > +{
 > > +  BUG_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
 > > +          GPIOF_OUT_INIT_LOW, "isp1704_reset"));
 > 
 >     I'm not sure we should kill the machine if this fails...

True, WARN_ON is probably sufficient.

- Kalle

 > 
 > WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to