Adapts omap-serial driver to use pm_runtime api's.
1.) Populate reg values to uart port which can be used for context restore.
2.) Moving context_restore func to driver from serial.c
3.) Adding port_enable/disable func to enable/disable given uart port.
enable port using get_sync and disable using autosuspend.
4.) using runtime irq safe api to make get_sync be called from irq context.
Acked-by: Alan Cox <[email protected]>
Signed-off-by: Govindraj.R <[email protected]>
---
arch/arm/mach-omap2/serial.c | 22 +++
arch/arm/plat-omap/include/plat/omap-serial.h | 2 +
drivers/tty/serial/omap-serial.c | 212 ++++++++++++++++++++++---
3 files changed, 210 insertions(+), 26 deletions(-)
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 8c1a4c7..1651c2c 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -189,6 +189,27 @@ static void omap_serial_fill_default_pads(struct
omap_board_data *bdata)
}
}
+static void omap_uart_wakeup_enable(struct platform_device *pdev, bool enable)
+{
+ struct omap_uart_port_info *up = pdev->dev.platform_data;
+
+ /* Set or clear wake-enable bit */
+ if (up->wk_en && up->wk_mask) {
+ u32 v = __raw_readl(up->wk_en);
+ if (enable)
+ v |= up->wk_mask;
+ else
+ v &= ~up->wk_mask;
+ __raw_writel(v, up->wk_en);
+ }
+
+ /* Enable or clear io-pad wakeup */
+ if (enable)
+ omap_device_enable_ioring_wakeup(pdev);
+ else
+ omap_device_disable_ioring_wakeup(pdev);
+}
+
static void omap_uart_idle_init(struct omap_uart_port_info *uart,
unsigned short num)
{
@@ -332,6 +353,7 @@ void __init omap_serial_init_port(struct omap_board_data
*bdata)
pdata->uartclk = OMAP24XX_BASE_BAUD * 16;
pdata->flags = UPF_BOOT_AUTOCONF;
+ pdata->enable_wakeup = omap_uart_wakeup_enable;
if (bdata->id == omap_uart_con_id)
pdata->console_uart = true;
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h
b/arch/arm/plat-omap/include/plat/omap-serial.h
index 2ca885b..ac30de8 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -65,6 +65,7 @@ struct omap_uart_port_info {
unsigned int errata;
unsigned int console_uart;
+ void (*enable_wakeup)(struct platform_device *, bool);
void __iomem *wk_st;
void __iomem *wk_en;
u32 wk_mask;
@@ -120,6 +121,7 @@ struct uart_omap_port {
char name[20];
unsigned long port_activity;
unsigned int errata;
+ void (*enable_wakeup)(struct platform_device *, bool);
};
#endif /* __OMAP_SERIAL_H__ */
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 47cadf4..897416f 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -37,10 +37,14 @@
#include <linux/clk.h>
#include <linux/serial_core.h>
#include <linux/irq.h>
+#include <linux/pm_runtime.h>
#include <plat/dma.h>
#include <plat/dmtimer.h>
#include <plat/omap-serial.h>
+#include <plat/omap_device.h>
+
+#define OMAP_UART_AUTOSUSPEND_DELAY (30 * HZ) /* Value is msecs */
static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
@@ -94,6 +98,17 @@ serial_omap_get_divisor(struct uart_port *port, unsigned int
baud)
return port->uartclk/(baud * divisor);
}
+static inline void serial_omap_port_disable(struct uart_omap_port *up)
+{
+ pm_runtime_mark_last_busy(&up->pdev->dev);
+ pm_runtime_put_autosuspend(&up->pdev->dev);
+}
+
+static inline void serial_omap_port_enable(struct uart_omap_port *up)
+{
+ pm_runtime_get_sync(&up->pdev->dev);
+}
+
static void serial_omap_stop_rxdma(struct uart_omap_port *up)
{
if (up->uart_dma.rx_dma_used) {
@@ -110,8 +125,11 @@ static void serial_omap_enable_ms(struct uart_port *port)
struct uart_omap_port *up = (struct uart_omap_port *)port;
dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id);
+
+ serial_omap_port_enable(up);
up->ier |= UART_IER_MSI;
serial_out(up, UART_IER, up->ier);
+ serial_omap_port_disable(up);
}
static void serial_omap_stop_tx(struct uart_port *port)
@@ -131,21 +149,26 @@ static void serial_omap_stop_tx(struct uart_port *port)
up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
}
+ serial_omap_port_enable(up);
if (up->ier & UART_IER_THRI) {
up->ier &= ~UART_IER_THRI;
serial_out(up, UART_IER, up->ier);
}
+
+ serial_omap_port_disable(up);
}
static void serial_omap_stop_rx(struct uart_port *port)
{
struct uart_omap_port *up = (struct uart_omap_port *)port;
+ serial_omap_port_enable(up);
if (up->use_dma)
serial_omap_stop_rxdma(up);
up->ier &= ~UART_IER_RLSI;
up->port.read_status_mask &= ~UART_LSR_DR;
serial_out(up, UART_IER, up->ier);
+ serial_omap_port_disable(up);
}
static inline void receive_chars(struct uart_omap_port *up, int *status)
@@ -261,8 +284,10 @@ static void serial_omap_start_tx(struct uart_port *port)
unsigned int start;
int ret = 0;
+ serial_omap_port_enable(up);
if (!up->use_dma) {
serial_omap_enable_ier_thri(up);
+ serial_omap_port_disable(up);
return;
}
@@ -354,9 +379,12 @@ static inline irqreturn_t serial_omap_irq(int irq, void
*dev_id)
unsigned int iir, lsr;
unsigned long flags;
+ serial_omap_port_enable(up);
iir = serial_in(up, UART_IIR);
- if (iir & UART_IIR_NO_INT)
+ if (iir & UART_IIR_NO_INT) {
+ serial_omap_port_disable(up);
return IRQ_NONE;
+ }
spin_lock_irqsave(&up->port.lock, flags);
lsr = serial_in(up, UART_LSR);
@@ -378,6 +406,8 @@ static inline irqreturn_t serial_omap_irq(int irq, void
*dev_id)
transmit_chars(up);
spin_unlock_irqrestore(&up->port.lock, flags);
+ serial_omap_port_disable(up);
+
up->port_activity = jiffies;
return IRQ_HANDLED;
}
@@ -388,11 +418,12 @@ static unsigned int serial_omap_tx_empty(struct uart_port
*port)
unsigned long flags = 0;
unsigned int ret = 0;
+ serial_omap_port_enable(up);
dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id);
spin_lock_irqsave(&up->port.lock, flags);
ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
spin_unlock_irqrestore(&up->port.lock, flags);
-
+ serial_omap_port_disable(up);
return ret;
}
@@ -402,7 +433,10 @@ static unsigned int serial_omap_get_mctrl(struct uart_port
*port)
unsigned char status;
unsigned int ret = 0;
+ serial_omap_port_enable(up);
status = check_modem_status(up);
+ serial_omap_port_disable(up);
+
dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id);
if (status & UART_MSR_DCD)
@@ -434,7 +468,9 @@ static void serial_omap_set_mctrl(struct uart_port *port,
unsigned int mctrl)
mcr |= UART_MCR_LOOP;
mcr |= up->mcr;
+ serial_omap_port_enable(up);
serial_out(up, UART_MCR, mcr);
+ serial_omap_port_disable(up);
}
static void serial_omap_break_ctl(struct uart_port *port, int break_state)
@@ -443,6 +479,7 @@ static void serial_omap_break_ctl(struct uart_port *port,
int break_state)
unsigned long flags = 0;
dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id);
+ serial_omap_port_enable(up);
spin_lock_irqsave(&up->port.lock, flags);
if (break_state == -1)
up->lcr |= UART_LCR_SBC;
@@ -450,6 +487,7 @@ static void serial_omap_break_ctl(struct uart_port *port,
int break_state)
up->lcr &= ~UART_LCR_SBC;
serial_out(up, UART_LCR, up->lcr);
spin_unlock_irqrestore(&up->port.lock, flags);
+ serial_omap_port_disable(up);
}
static int serial_omap_startup(struct uart_port *port)
@@ -468,6 +506,7 @@ static int serial_omap_startup(struct uart_port *port)
dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id);
+ serial_omap_port_enable(up);
/*
* Clear the FIFO buffers and disable them.
* (they will be reenabled in set_termios())
@@ -523,6 +562,7 @@ static int serial_omap_startup(struct uart_port *port)
/* Enable module level wake up */
serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP);
+ serial_omap_port_disable(up);
up->port_activity = jiffies;
return 0;
}
@@ -533,6 +573,8 @@ static void serial_omap_shutdown(struct uart_port *port)
unsigned long flags = 0;
dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id);
+
+ serial_omap_port_enable(up);
/*
* Disable interrupts from this port
*/
@@ -566,6 +608,7 @@ static void serial_omap_shutdown(struct uart_port *port)
up->uart_dma.rx_buf_dma_phys);
up->uart_dma.rx_buf = NULL;
}
+ serial_omap_port_disable(up);
free_irq(up->port.irq, up);
}
@@ -671,6 +714,10 @@ serial_omap_set_termios(struct uart_port *port, struct
ktermios *termios,
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13);
quot = serial_omap_get_divisor(port, baud);
+ up->dll = quot & 0xff;
+ up->dlh = quot >> 8;
+ up->mdr1 = UART_OMAP_MDR1_DISABLE;
+
up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 |
UART_FCR_ENABLE_FIFO;
if (up->use_dma)
@@ -680,6 +727,7 @@ serial_omap_set_termios(struct uart_port *port, struct
ktermios *termios,
* Ok, we're now changing the port state. Do it with
* interrupts disabled.
*/
+ serial_omap_port_enable(up);
spin_lock_irqsave(&up->port.lock, flags);
/*
@@ -723,6 +771,7 @@ serial_omap_set_termios(struct uart_port *port, struct
ktermios *termios,
up->ier |= UART_IER_MSI;
serial_out(up, UART_IER, up->ier);
serial_out(up, UART_LCR, cval); /* reset DLAB */
+ up->lcr = cval;
/* FIFOs and DMA Settings */
@@ -758,8 +807,7 @@ serial_omap_set_termios(struct uart_port *port, struct
ktermios *termios,
serial_out(up, UART_MCR, up->mcr);
/* Protocol, Baud Rate, and Interrupt Settings */
-
- serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
+ serial_out(up, UART_OMAP_MDR1, up->mdr1);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
up->efr = serial_in(up, UART_EFR);
@@ -769,8 +817,8 @@ serial_omap_set_termios(struct uart_port *port, struct
ktermios *termios,
serial_out(up, UART_IER, 0);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
- serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
- serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
+ serial_out(up, UART_DLL, up->dll); /* LS of divisor */
+ serial_out(up, UART_DLM, up->dlh); /* MS of divisor */
serial_out(up, UART_LCR, 0);
serial_out(up, UART_IER, up->ier);
@@ -780,9 +828,11 @@ serial_omap_set_termios(struct uart_port *port, struct
ktermios *termios,
serial_out(up, UART_LCR, cval);
if (baud > 230400 && baud != 3000000)
- serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE);
+ up->mdr1 = UART_OMAP_MDR1_13X_MODE;
else
- serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
+ up->mdr1 = UART_OMAP_MDR1_16X_MODE;
+
+ serial_out(up, UART_OMAP_MDR1, up->mdr1)
/* Hardware Flow Control Configuration */
@@ -810,6 +860,7 @@ serial_omap_set_termios(struct uart_port *port, struct
ktermios *termios,
serial_omap_configure_xonxoff(up, termios);
spin_unlock_irqrestore(&up->port.lock, flags);
+ serial_omap_port_disable(up);
dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id);
}
@@ -821,6 +872,8 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
unsigned char efr;
dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id);
+
+ serial_omap_port_enable(up);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
efr = serial_in(up, UART_EFR);
serial_out(up, UART_EFR, efr | UART_EFR_ECB);
@@ -830,6 +883,10 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
serial_out(up, UART_EFR, efr);
serial_out(up, UART_LCR, 0);
+ if (state)
+ pm_runtime_put_sync(&up->pdev->dev);
+ else
+ serial_omap_port_disable(up);
}
static void serial_omap_release_port(struct uart_port *port)
@@ -907,25 +964,31 @@ static inline void wait_for_xmitr(struct uart_omap_port
*up)
static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch)
{
struct uart_omap_port *up = (struct uart_omap_port *)port;
+
+ serial_omap_port_enable(up);
wait_for_xmitr(up);
serial_out(up, UART_TX, ch);
+ serial_omap_port_disable(up);
}
static int serial_omap_poll_get_char(struct uart_port *port)
{
struct uart_omap_port *up = (struct uart_omap_port *)port;
- unsigned int status = serial_in(up, UART_LSR);
+ unsigned int status;
+ serial_omap_port_enable(up);
+ status = serial_in(up, UART_LSR);
if (!(status & UART_LSR_DR))
return NO_POLL_CHAR;
- return serial_in(up, UART_RX);
+ status = serial_in(up, UART_RX);
+ serial_omap_port_disable(up);
+ return status;
}
#endif /* CONFIG_CONSOLE_POLL */
#ifdef CONFIG_SERIAL_OMAP_CONSOLE
-
static struct uart_omap_port *serial_omap_console_ports[4];
static struct uart_driver serial_omap_reg;
@@ -955,6 +1018,8 @@ serial_omap_console_write(struct console *co, const char
*s,
else
spin_lock(&up->port.lock);
+ serial_omap_port_enable(up);
+
/*
* First save the IER then disable the interrupts
*/
@@ -979,6 +1044,7 @@ serial_omap_console_write(struct console *co, const char
*s,
if (up->msr_saved_flags)
check_modem_status(up);
+ serial_omap_port_disable(up);
if (locked)
spin_unlock(&up->port.lock);
local_irq_restore(flags);
@@ -1061,22 +1127,27 @@ static struct uart_driver serial_omap_reg = {
.cons = OMAP_CONSOLE,
};
-static int
-serial_omap_suspend(struct platform_device *pdev, pm_message_t state)
+static int serial_omap_suspend(struct device *dev)
{
- struct uart_omap_port *up = platform_get_drvdata(pdev);
+ struct uart_omap_port *up = dev_get_drvdata(dev);
- if (up)
+ if (up) {
uart_suspend_port(&serial_omap_reg, &up->port);
+ console_trylock();
+ serial_omap_pm(&up->port, 3, 0);
+ }
return 0;
}
-static int serial_omap_resume(struct platform_device *dev)
+static int serial_omap_resume(struct device *dev)
{
- struct uart_omap_port *up = platform_get_drvdata(dev);
+ struct uart_omap_port *up = dev_get_drvdata(dev);
- if (up)
+ if (up) {
uart_resume_port(&serial_omap_reg, &up->port);
+ console_unlock();
+ }
+
return 0;
}
@@ -1097,6 +1168,7 @@ static void serial_omap_rx_timeout(unsigned long uart_no)
serial_omap_stop_rxdma(up);
up->ier |= (UART_IER_RDI | UART_IER_RLSI);
serial_out(up, UART_IER, up->ier);
+ serial_omap_port_disable(up);
}
return;
}
@@ -1128,6 +1200,9 @@ static void serial_omap_rx_timeout(unsigned long uart_no)
static void uart_rx_dma_callback(int lch, u16 ch_status, void *data)
{
+ struct uart_omap_port *up = (struct uart_omap_port *)data;
+
+ serial_omap_port_disable(up);
return;
}
@@ -1135,6 +1210,7 @@ static int serial_omap_start_rxdma(struct uart_omap_port
*up)
{
int ret = 0;
+ serial_omap_port_enable(up);
if (up->uart_dma.rx_dma_channel == -1) {
ret = omap_request_dma(up->uart_dma.uart_dma_rx,
"UART Rx DMA",
@@ -1214,6 +1290,7 @@ static void uart_tx_dma_callback(int lch, u16 ch_status,
void *data)
serial_omap_stop_tx(&up->port);
up->uart_dma.tx_dma_used = false;
spin_unlock(&(up->uart_dma.tx_lock));
+ serial_omap_port_disable(up);
} else {
omap_stop_dma(up->uart_dma.tx_dma_channel);
serial_omap_continue_tx(up);
@@ -1224,9 +1301,10 @@ static void uart_tx_dma_callback(int lch, u16 ch_status,
void *data)
static int serial_omap_probe(struct platform_device *pdev)
{
- struct uart_omap_port *up;
+ struct uart_omap_port *up = NULL;
struct resource *mem, *irq, *dma_tx, *dma_rx;
struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data;
+ struct omap_device *od;
int ret = -ENOSPC;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1276,12 +1354,20 @@ static int serial_omap_probe(struct platform_device
*pdev)
up->port.ops = &serial_omap_pops;
up->port.line = pdev->id;
- up->port.membase = omap_up_info->membase;
- up->port.mapbase = omap_up_info->mapbase;
+ up->port.mapbase = mem->start;
+ up->port.membase = ioremap(mem->start, mem->end - mem->start);
+
+ if (!up->port.membase) {
+ dev_err(&pdev->dev, "can't ioremap UART\n");
+ ret = -ENOMEM;
+ goto err1;
+ }
+
up->port.flags = omap_up_info->flags;
- up->port.irqflags = omap_up_info->irqflags;
up->port.uartclk = omap_up_info->uartclk;
up->uart_dma.uart_base = mem->start;
+ up->errata = omap_up_info->errata;
+ up->enable_wakeup = omap_up_info->enable_wakeup;
if (omap_up_info->dma_enabled) {
up->uart_dma.uart_dma_tx = dma_tx->start;
@@ -1295,18 +1381,36 @@ static int serial_omap_probe(struct platform_device
*pdev)
up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
}
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev,
+ OMAP_UART_AUTOSUSPEND_DELAY);
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_irq_safe(&pdev->dev);
+
+ if (omap_up_info->console_uart) {
+ od = to_omap_device(up->pdev);
+ omap_hwmod_idle(od->hwmods[0]);
+ serial_omap_port_enable(up);
+ serial_omap_port_disable(up);
+ }
+
ui[pdev->id] = up;
serial_omap_add_console_port(up);
ret = uart_add_one_port(&serial_omap_reg, &up->port);
if (ret != 0)
- goto do_release_region;
+ goto err1;
+ dev_set_drvdata(&pdev->dev, up);
platform_set_drvdata(pdev, up);
+
return 0;
err:
dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
pdev->id, __func__, ret);
+err1:
+ kfree(up);
do_release_region:
release_mem_region(mem->start, (mem->end - mem->start) + 1);
return ret;
@@ -1318,20 +1422,76 @@ static int serial_omap_remove(struct platform_device
*dev)
platform_set_drvdata(dev, NULL);
if (up) {
+ pm_runtime_disable(&up->pdev->dev);
uart_remove_one_port(&serial_omap_reg, &up->port);
kfree(up);
}
return 0;
}
+static void omap_uart_restore_context(struct uart_omap_port *up)
+{
+ u16 efr = 0;
+
+ serial_out(up, UART_OMAP_MDR1, up->mdr1);
+ serial_out(up, UART_LCR, 0xBF); /* Config B mode */
+ efr = serial_in(up, UART_EFR);
+ serial_out(up, UART_EFR, UART_EFR_ECB);
+ serial_out(up, UART_LCR, 0x0); /* Operational mode */
+ serial_out(up, UART_IER, 0x0);
+ serial_out(up, UART_LCR, 0xBF); /* Config B mode */
+ serial_out(up, UART_DLL, up->dll);
+ serial_out(up, UART_DLM, up->dlh);
+ serial_out(up, UART_LCR, 0x0); /* Operational mode */
+ serial_out(up, UART_IER, up->ier);
+ serial_out(up, UART_FCR, up->fcr);
+ serial_out(up, UART_LCR, 0x80);
+ serial_out(up, UART_MCR, up->mcr);
+ serial_out(up, UART_LCR, 0xBF); /* Config B mode */
+ serial_out(up, UART_EFR, efr);
+ serial_out(up, UART_LCR, up->lcr);
+ /* UART 16x mode */
+ serial_out(up, UART_OMAP_MDR1, up->mdr1);
+}
+
+static int omap_serial_runtime_suspend(struct device *dev)
+{
+ struct uart_omap_port *up = dev_get_drvdata(dev);
+
+ if (!up)
+ goto done;
+
+ if (device_may_wakeup(dev))
+ up->enable_wakeup(up->pdev, true);
+ else
+ up->enable_wakeup(up->pdev, false);
+done:
+ return 0;
+}
+
+static int omap_serial_runtime_resume(struct device *dev)
+{
+ struct uart_omap_port *up = dev_get_drvdata(dev);
+
+ if (up)
+ omap_uart_restore_context(up);
+
+ return 0;
+}
+
+static const struct dev_pm_ops omap_serial_dev_pm_ops = {
+ .suspend = serial_omap_suspend,
+ .resume = serial_omap_resume,
+ .runtime_suspend = omap_serial_runtime_suspend,
+ .runtime_resume = omap_serial_runtime_resume,
+};
+
static struct platform_driver serial_omap_driver = {
.probe = serial_omap_probe,
.remove = serial_omap_remove,
-
- .suspend = serial_omap_suspend,
- .resume = serial_omap_resume,
.driver = {
.name = DRIVER_NAME,
+ .pm = &omap_serial_dev_pm_ops,
},
};
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
