Hi Govindraj
On 06/08/2011 11:35 PM, Govindraj wrote:
On Thu, Jun 9, 2011 at 2:09 AM, Jon Hunter<[email protected]> wrote:
Hi Govindraj,
On 6/8/2011 6:23 AM, Govindraj.R wrote:
[snip]
+
+#define OMAP_UART_AUTOSUSPEND_DELAY (30 * HZ) /* Value is msecs */
[snip]
@@ -1295,18 +1381,36 @@ static int serial_omap_probe(struct
platform_device *pdev)
up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
}
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev,
+ OMAP_UART_AUTOSUSPEND_DELAY);
Something is weird here...DEFAULT_AUTOSUSPEND_DELAY is defined as (30*HZ)
which would appear to be jiffies (ticks per second) and NOT msecs. However,
pm_runtime_set_autosuspend is clearly expecting msecs. So this seems to
conflict. By default 30*HZ for omap would be 30*128 = 3840ms so not quite 4
seconds.
What were you intending here?
Intention is to get approx 3 secs timeout for autosuspend.
In that case you should just define DEFAULT_AUTOSUSPEND_DELAY as 30000.
The above is just confusing as you are mixing time types and hence, it
is not clear what you intend the default timeout to be.
Jon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
