Benoit Cousson <[email protected]> writes:
> Since the MMC driver is not pm_runtime adapted, do not put
> them in idle after boot.
> It will allow the driver to work as expected until the migration
> to pm_runtime.
>
> Signed-off-by: Benoit Cousson <[email protected]>
> Cc: Paul Walmsley <[email protected]>
> Cc: Rajendra Nayak <[email protected]>
> ---
> arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
Similar is needed for OMAP3 as well to boot this series.
Kevin
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/om
index dec1a38..aaa3201 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -3500,6 +3500,7 @@ static struct omap_hwmod omap3xxx_mmc1_hwmod = {
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves),
.class = &omap34xx_mmc_class,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
};
/* MMC/SD/SDIO2 */
@@ -3543,6 +3544,7 @@ static struct omap_hwmod omap3xxx_mmc2_hwmod = {
.slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves),
.class = &omap34xx_mmc_class,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
};
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
