On Mon, 2011-06-27 at 18:33 +0200, Benoit Cousson wrote:
> Previously, main_clk was a fake clock node that was accessing the
> PRCM modulemode register. Since the module mode is directly
> controlled by the hwmod fmwk, these fake clock node are not
> needed anymore. The hwmod main_clk will point directly to the
> input clock node if applicable.
> For example, some IPs, like the GPIOs, do not have any functional
> clock and are using only the iclk. In that case, the main_clk
> field will be empty.
>
> In the case of the DSS, we can now consider all the optional clock as
> main clock.
> That will simplify greatly the driver management and the integration
> with hwmod.
>
> Signed-off-by: Benoit Cousson <[email protected]>
> Cc: Tomi Valkeinen <[email protected]>
> Cc: Paul Walmsley <[email protected]>
> Cc: Rajendra Nayak <[email protected]>
> ---
> arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 111
> +++++++++++++---------------
> 1 files changed, 51 insertions(+), 60 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> index e10d3f7..5c196a1 100644
> --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
> +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
<snip>
> @@ -1263,7 +1263,6 @@ static struct omap_hwmod omap44xx_dss_hwmod = {
> .name = "dss_core",
> .class = &omap44xx_dss_hwmod_class,
> .clkdm_name = "l3_dss_clkdm",
> - .main_clk = "dss_fck",
> .prcm = {
> .omap4 = {
> .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
Why dss_core doesn't need a mainclock? Shouldn't it have dss_dss_clk as
a mainclock?
> @@ -1363,7 +1362,7 @@ static struct omap_hwmod omap44xx_dss_dispc_hwmod = {
> .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dispc_irqs),
> .sdma_reqs = omap44xx_dss_dispc_sdma_reqs,
> .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_dispc_sdma_reqs),
> - .main_clk = "dss_fck",
> + .main_clk = "dss_dss_clk",
> .prcm = {
> .omap4 = {
> .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
> @@ -1456,7 +1455,7 @@ static struct omap_hwmod omap44xx_dss_dsi1_hwmod = {
> .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_irqs),
> .sdma_reqs = omap44xx_dss_dsi1_sdma_reqs,
> .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_sdma_reqs),
> - .main_clk = "dss_fck",
> + .main_clk = "dss_sys_clk",
> .prcm = {
> .omap4 = {
> .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
Hmm... I don't think this is right. By default the DSI uses dss_dss_clk
as the functional clock. sys_clk goes to the DSI PLL, and the output of
which can be later used as the fclk for DSI. But that requires setup.
> @@ -1528,7 +1527,7 @@ static struct omap_hwmod omap44xx_dss_dsi2_hwmod = {
> .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_irqs),
> .sdma_reqs = omap44xx_dss_dsi2_sdma_reqs,
> .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_sdma_reqs),
> - .main_clk = "dss_fck",
> + .main_clk = "dss_sys_clk",
> .prcm = {
> .omap4 = {
> .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
Same here.
Tomi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
