With register offsets now defined for respective OMAP versions we can get rid
of cpu_class_* checks. This function now has common initialization code for
all OMAP versions. Initialization specific to OMAP16xx has been moved within
omap16xx_gpio_init().

Signed-off-by: Tarun Kanti DebBarma <tarun.ka...@ti.com>
Signed-off-by: Charulatha V <ch...@ti.com>
---
 arch/arm/mach-omap1/gpio16xx.c         |   19 ++++++-
 arch/arm/plat-omap/include/plat/gpio.h |    2 +
 drivers/gpio/gpio-omap.c               |   96 +++++++++++++++-----------------
 3 files changed, 64 insertions(+), 53 deletions(-)

diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 08dda3c..cfd86b9 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -93,6 +93,7 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
        .wkup_status    = OMAP1610_GPIO_WAKEUPENABLE,
        .edgectrl1      = OMAP1610_GPIO_EDGE_CTRL1,
        .edgectrl2      = OMAP1610_GPIO_EDGE_CTRL2,
+       .sysconfig      = OMAP1610_GPIO_SYSCONFIG,
 };
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
@@ -218,12 +219,28 @@ static struct __initdata platform_device * 
omap16xx_gpio_dev[] = {
 static int __init omap16xx_gpio_init(void)
 {
        int i;
+       void __iomem *base;
+       struct resource *res;
+       struct platform_device *pdev;
+       struct omap_gpio_platform_data *pdata;
 
        if (!cpu_is_omap16xx())
                return -EINVAL;
 
-       for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++)
+       for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) {
+               pdev = omap16xx_gpio_dev[i];
+               pdata = pdev->dev.platform_data;
+               res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+               base = ioremap(res->start, resource_size(res));
+
+               if (pdata->regs->sysconfig)
+                       __raw_writew(0x0014, base + OMAP1610_GPIO_SYSCONFIG);
+
+               omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
+                                       ULPD_CAM_CLK_CTRL);
+
                platform_device_register(omap16xx_gpio_dev[i]);
+       }
 
        return 0;
 }
diff --git a/arch/arm/plat-omap/include/plat/gpio.h 
b/arch/arm/plat-omap/include/plat/gpio.h
index 4f584de..3f7b028 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -198,6 +198,8 @@ struct omap_gpio_reg_offs {
        u16 irqctrl;
        u16 edgectrl1;
        u16 edgectrl2;
+       /* Not applicable for OMAP2+ as hwmod layer takes care of sysconfig */
+       u16 sysconfig;
 
        bool irqenable_inv;
 };
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 769fae7..3acbaa9 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -75,6 +75,7 @@ struct gpio_bank {
 
        void (*set_dataout)(struct gpio_bank *bank, int gpio, int enable);
        int (*get_context_loss_count)(struct device *dev);
+       void (*do_raw_write)(void __iomem *reg, int set);
 
        struct omap_gpio_reg_offs *regs;
 };
@@ -864,67 +865,53 @@ static void __init omap_gpio_show_rev(struct gpio_bank 
*bank)
        called = true;
 }
 
+static void __do_raw_writel(void __iomem *reg, int set)
+{
+       if (set)
+               __raw_writel(0xffffffff, reg);
+       else
+               __raw_writel(0x00000000, reg);
+
+}
+
+static void __do_raw_writew(void __iomem *reg, int set)
+{
+       if (set)
+               __raw_writew(0xffff, reg);
+       else
+               __raw_writew(0x0000, reg);
+}
+
 /* This lock class tells lockdep that GPIO irqs are in a different
  * category than their parents, so it won't report false recursion.
  */
 static struct lock_class_key gpio_lock_class;
 
-/* TODO: Cleanup cpu_is_* checks */
 static void omap_gpio_mod_init(struct gpio_bank *bank)
 {
-       if (cpu_class_is_omap2()) {
-               if (cpu_is_omap44xx()) {
-                       __raw_writel(0xffffffff, bank->base +
-                                       OMAP4_GPIO_IRQSTATUSCLR0);
-                       __raw_writel(0x00000000, bank->base +
-                                        OMAP4_GPIO_DEBOUNCENABLE);
-                       /* Initialize interface clk ungated, module enabled */
-                       __raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
-               } else if (cpu_is_omap34xx()) {
-                       __raw_writel(0x00000000, bank->base +
-                                       OMAP24XX_GPIO_IRQENABLE1);
-                       __raw_writel(0xffffffff, bank->base +
-                                       OMAP24XX_GPIO_IRQSTATUS1);
-                       __raw_writel(0x00000000, bank->base +
-                                       OMAP24XX_GPIO_DEBOUNCE_EN);
-
-                       /* Initialize interface clk ungated, module enabled */
-                       __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
-               }
-       } else if (cpu_class_is_omap1()) {
-               if (bank_is_mpuio(bank)) {
-                       __raw_writew(0xffff, bank->base +
-                               OMAP_MPUIO_GPIO_MASKIT / bank->stride);
+       if (bank_is_mpuio(bank)) {
+               bank->do_raw_write(bank->base + bank->regs->irqenable, 1);
+               if (bank->regs->wkup_status)
                        mpuio_init(bank);
-               }
-               if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
-                       __raw_writew(0xffff, bank->base
-                                               + OMAP1510_GPIO_INT_MASK);
-                       __raw_writew(0x0000, bank->base
-                                               + OMAP1510_GPIO_INT_STATUS);
-               }
-               if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
-                       __raw_writew(0x0000, bank->base
-                                               + OMAP1610_GPIO_IRQENABLE1);
-                       __raw_writew(0xffff, bank->base
-                                               + OMAP1610_GPIO_IRQSTATUS1);
-                       __raw_writew(0x0014, bank->base
-                                               + OMAP1610_GPIO_SYSCONFIG);
-
-                       /*
-                        * Enable system clock for GPIO module.
-                        * The CAM_CLK_CTRL *is* really the right place.
-                        */
-                       omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
-                                               ULPD_CAM_CLK_CTRL);
-               }
-               if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
-                       __raw_writel(0xffffffff, bank->base
-                                               + OMAP7XX_GPIO_INT_MASK);
-                       __raw_writel(0x00000000, bank->base
-                                               + OMAP7XX_GPIO_INT_STATUS);
-               }
+               return;
        }
+
+       if (bank->regs->ctrl)
+               /* Initialize interface clk ungated, module enabled */
+               bank->do_raw_write(bank->base + bank->regs->ctrl, 0);
+
+       if (bank->regs->clr_irqenable && bank->width == 32)
+               bank->do_raw_write(bank->base + bank->regs->clr_irqenable, 1);
+       else if (bank->regs->irqenable)
+               bank->do_raw_write(bank->base + bank->regs->irqenable,
+                               bank->regs->irqenable_inv);
+
+       if (bank->regs->irqstatus)
+               bank->do_raw_write(bank->base + bank->regs->irqstatus,
+                               bank->regs->irqenable_inv == 0);
+
+       if (bank->regs->debounce_en)
+               bank->do_raw_write(bank->base + bank->regs->debounce_en, 0);
 }
 
 static __init void
@@ -1041,6 +1028,11 @@ static int __devinit omap_gpio_probe(struct 
platform_device *pdev)
        bank->get_context_loss_count = pdata->get_context_loss_count;
        bank->regs = pdata->regs;
 
+       if (bank->width == 32)
+               bank->do_raw_write = __do_raw_writel;
+       else
+               bank->do_raw_write = __do_raw_writew;
+
        if (bank->regs->set_dataout && bank->regs->clr_dataout)
                bank->set_dataout = _set_gpio_dataout_reg;
        else
-- 
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to