From: Charulatha V <[email protected]>

The only bank->type (method) used in the OMAP GPIO driver is MPUIO type as they
need to be handled separately. Identify the same using a flag and remove all
METHOD_* macros.

Signed-off-by: Charulatha V <[email protected]>
---
 arch/arm/mach-omap1/gpio15xx.c         |    3 +--
 arch/arm/mach-omap1/gpio16xx.c         |    6 +-----
 arch/arm/mach-omap1/gpio7xx.c          |    8 +-------
 arch/arm/mach-omap2/gpio.c             |    2 --
 arch/arm/plat-omap/include/plat/gpio.h |    8 +-------
 drivers/gpio/gpio-omap.c               |   16 +++++-----------
 6 files changed, 9 insertions(+), 34 deletions(-)

diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 020725f..c51593c 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -47,7 +47,7 @@ static struct omap_gpio_reg_offs omap15xx_mpuio_regs = {
 
 static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = {
        .virtual_irq_start      = IH_MPUIO_BASE,
-       .bank_type              = METHOD_MPUIO,
+       .is_mpuio               = true,
        .bank_width             = 16,
        .bank_stride            = 1,
        .regs                   = &omap15xx_mpuio_regs,
@@ -90,7 +90,6 @@ static struct omap_gpio_reg_offs omap15xx_gpio_regs = {
 
 static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = {
        .virtual_irq_start      = IH_GPIO_BASE,
-       .bank_type              = METHOD_GPIO_1510,
        .bank_width             = 16,
        .regs                   = &omap15xx_gpio_regs,
 };
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index cfd86b9..8509155 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -50,7 +50,7 @@ static struct omap_gpio_reg_offs omap16xx_mpuio_regs = {
 
 static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = {
        .virtual_irq_start      = IH_MPUIO_BASE,
-       .bank_type              = METHOD_MPUIO,
+       .is_mpuio               = true,
        .bank_width             = 16,
        .bank_stride            = 1,
        .regs                   = &omap16xx_mpuio_regs,
@@ -98,7 +98,6 @@ static struct omap_gpio_reg_offs omap16xx_gpio_regs = {
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = {
        .virtual_irq_start      = IH_GPIO_BASE,
-       .bank_type              = METHOD_GPIO_1610,
        .bank_width             = 16,
        .regs                   = &omap16xx_gpio_regs,
 };
@@ -128,7 +127,6 @@ static struct __initdata resource 
omap16xx_gpio2_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = {
        .virtual_irq_start      = IH_GPIO_BASE + 16,
-       .bank_type              = METHOD_GPIO_1610,
        .bank_width             = 16,
        .regs                   = &omap16xx_gpio_regs,
 };
@@ -158,7 +156,6 @@ static struct __initdata resource 
omap16xx_gpio3_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = {
        .virtual_irq_start      = IH_GPIO_BASE + 32,
-       .bank_type              = METHOD_GPIO_1610,
        .bank_width             = 16,
        .regs                   = &omap16xx_gpio_regs,
 };
@@ -188,7 +185,6 @@ static struct __initdata resource 
omap16xx_gpio4_resources[] = {
 
 static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = {
        .virtual_irq_start      = IH_GPIO_BASE + 48,
-       .bank_type              = METHOD_GPIO_1610,
        .bank_width             = 16,
        .regs                   = &omap16xx_gpio_regs,
 };
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 6e439ff..91a7691 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -52,8 +52,8 @@ static struct omap_gpio_reg_offs omap7xx_mpuio_regs = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = {
        .virtual_irq_start      = IH_MPUIO_BASE,
-       .bank_type              = METHOD_MPUIO,
        .bank_width             = 32,
+       .is_mpuio               = true,
        .bank_stride            = 2,
        .regs                   = &omap7xx_mpuio_regs,
 };
@@ -94,7 +94,6 @@ static struct omap_gpio_reg_offs omap7xx_gpio_regs = {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = {
        .virtual_irq_start      = IH_GPIO_BASE,
-       .bank_type              = METHOD_GPIO_7XX,
        .bank_width             = 32,
        .regs                   = &omap7xx_gpio_regs,
 };
@@ -124,7 +123,6 @@ static struct __initdata resource omap7xx_gpio2_resources[] 
= {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = {
        .virtual_irq_start      = IH_GPIO_BASE + 32,
-       .bank_type              = METHOD_GPIO_7XX,
        .bank_width             = 32,
        .regs                   = &omap7xx_gpio_regs,
 };
@@ -154,7 +152,6 @@ static struct __initdata resource omap7xx_gpio3_resources[] 
= {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = {
        .virtual_irq_start      = IH_GPIO_BASE + 64,
-       .bank_type              = METHOD_GPIO_7XX,
        .bank_width             = 32,
        .regs                   = &omap7xx_gpio_regs,
 };
@@ -184,7 +181,6 @@ static struct __initdata resource omap7xx_gpio4_resources[] 
= {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = {
        .virtual_irq_start      = IH_GPIO_BASE + 96,
-       .bank_type              = METHOD_GPIO_7XX,
        .bank_width             = 32,
        .regs                   = &omap7xx_gpio_regs,
 };
@@ -214,7 +210,6 @@ static struct __initdata resource omap7xx_gpio5_resources[] 
= {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = {
        .virtual_irq_start      = IH_GPIO_BASE + 128,
-       .bank_type              = METHOD_GPIO_7XX,
        .bank_width             = 32,
        .regs                   = &omap7xx_gpio_regs,
 };
@@ -244,7 +239,6 @@ static struct __initdata resource omap7xx_gpio6_resources[] 
= {
 
 static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = {
        .virtual_irq_start      = IH_GPIO_BASE + 160,
-       .bank_type              = METHOD_GPIO_7XX,
        .bank_width             = 32,
        .regs                   = &omap7xx_gpio_regs,
 };
diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index c99eea4..1e72a56 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -97,7 +97,6 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void 
*unused)
                /* fall through */
 
        case 1:
-               pdata->bank_type = METHOD_GPIO_24XX;
                pdata->regs->revision = OMAP24XX_GPIO_REVISION;
                pdata->regs->direction = OMAP24XX_GPIO_OE;
                pdata->regs->datain = OMAP24XX_GPIO_DATAIN;
@@ -120,7 +119,6 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void 
*unused)
                pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT;
                break;
        case 2:
-               pdata->bank_type = METHOD_GPIO_44XX;
                pdata->regs->revision = OMAP4_GPIO_REVISION;
                pdata->regs->direction = OMAP4_GPIO_OE;
                pdata->regs->datain = OMAP4_GPIO_DATAIN;
diff --git a/arch/arm/plat-omap/include/plat/gpio.h 
b/arch/arm/plat-omap/include/plat/gpio.h
index e1ef4e4..168b335 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -162,13 +162,6 @@
                                 IH_MPUIO_BASE + ((nr) & 0x0f) : \
                                 IH_GPIO_BASE + (nr))
 
-#define METHOD_MPUIO           0
-#define METHOD_GPIO_1510       1
-#define METHOD_GPIO_1610       2
-#define METHOD_GPIO_7XX                3
-#define METHOD_GPIO_24XX       5
-#define METHOD_GPIO_44XX       6
-
 struct omap_gpio_dev_attr {
        int bank_width;         /* GPIO bank width */
        bool dbck_flag;         /* dbck required or not - True for OMAP3&4 */
@@ -212,6 +205,7 @@ struct omap_gpio_platform_data {
        int bank_stride;        /* Only needed for omap1 MPUIO */
        bool dbck_flag;         /* dbck required or not - True for OMAP3&4 */
        bool loses_context;     /* whether the bank would ever lose context */
+       bool is_mpuio;          /* whether the bank is of type MPUIO */
        u32 non_wakeup_gpios;
 
        struct omap_gpio_reg_offs *regs;
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 25675a6..f1e346b 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -49,7 +49,6 @@ struct gpio_bank {
        void __iomem *base;
        u16 irq;
        u16 virtual_irq_start;
-       int method;
        u32 suspend_wakeup;
        u32 saved_wakeup;
        u32 non_wakeup_gpios;
@@ -66,6 +65,7 @@ struct gpio_bank {
        u32 mod_usage;
        u32 dbck_enable_mask;
        struct device *dev;
+       bool is_mpuio;
        bool dbck_flag;
        bool loses_context;
        int stride;
@@ -685,8 +685,6 @@ static struct irq_chip gpio_irq_chip = {
 };
 
 /*---------------------------------------------------------------------*/
-#define bank_is_mpuio(bank)    ((bank)->method == METHOD_MPUIO)
-
 static int omap_mpuio_suspend_noirq(struct device *dev)
 {
        struct platform_device *pdev = to_platform_device(dev);
@@ -750,10 +748,6 @@ static inline void mpuio_init(struct gpio_bank *bank)
 
 /*---------------------------------------------------------------------*/
 
-/* REVISIT these are stupid implementations!  replace by ones that
- * don't switch on METHOD_* and which mostly avoid spinlocks
- */
-
 static int gpio_input(struct gpio_chip *chip, unsigned offset)
 {
        struct gpio_bank *bank;
@@ -885,7 +879,7 @@ static struct lock_class_key gpio_lock_class;
 
 static void omap_gpio_mod_init(struct gpio_bank *bank)
 {
-       if (bank_is_mpuio(bank)) {
+       if (bank->is_mpuio) {
                bank->do_raw_write(bank->base + bank->regs->irqenable, 1);
                if (bank->regs->wkup_status)
                        mpuio_init(bank);
@@ -952,7 +946,7 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank 
*bank)
        bank->chip.set_debounce = gpio_debounce;
        bank->chip.set = gpio_set;
        bank->chip.to_irq = gpio_2irq;
-       if (bank_is_mpuio(bank)) {
+       if (bank->is_mpuio) {
                bank->chip.label = "mpuio";
                if (bank->regs->wkup_status)
                        bank->chip.dev = &omap_mpuio_device.dev;
@@ -970,7 +964,7 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank 
*bank)
                     j < bank->virtual_irq_start + bank->width; j++) {
                irq_set_lockdep_class(j, &gpio_lock_class);
                irq_set_chip_data(j, bank);
-               if (bank_is_mpuio(bank)) {
+               if (bank->is_mpuio) {
                        omap_mpuio_alloc_gc(bank, j, bank->width);
                } else {
                        irq_set_chip(j, &gpio_irq_chip);
@@ -1014,11 +1008,11 @@ static int __devinit omap_gpio_probe(struct 
platform_device *pdev)
 
        pdata = pdev->dev.platform_data;
        bank->virtual_irq_start = pdata->virtual_irq_start;
-       bank->method = pdata->bank_type;
        bank->dev = &pdev->dev;
        bank->dbck_flag = pdata->dbck_flag;
        bank->stride = pdata->bank_stride;
        bank->width = pdata->bank_width;
+       bank->is_mpuio = pdata->is_mpuio;
        bank->non_wakeup_gpios = pdata->non_wakeup_gpios;
        bank->loses_context = pdata->loses_context;
        bank->get_context_loss_count = pdata->get_context_loss_count;
-- 
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to