Hi, On Thu, Aug 18, 2011 at 04:22:12PM +0530, Keerthy wrote: > The register set and the > bit fields might vary across OMAP versions. Hence > creating a structure comprising of all the registers > and bit fields to make the driver uniform for all the > versions with different register sets. The data file > contains the structure populated with register offsets > and bit fields corresponding to OMAP4460 on die sensor. > > Signed-off-by: Keerthy <[email protected]> > Cc: [email protected] > --- > arch/arm/mach-omap2/Makefile | 2 +- > arch/arm/mach-omap2/temp_sensor4460_data.c | 63 ++++++++++++++ > .../plat-omap/include/plat/temperature_sensor.h | 89 > ++++++++++++++++++++ > 3 files changed, 153 insertions(+), 1 deletions(-) > create mode 100644 arch/arm/mach-omap2/temp_sensor4460_data.c > create mode 100644 arch/arm/plat-omap/include/plat/temperature_sensor.h > > diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile > index fb02937..2d5d981 100644 > --- a/arch/arm/mach-omap2/Makefile > +++ b/arch/arm/mach-omap2/Makefile > @@ -86,7 +86,7 @@ obj-$(CONFIG_ARCH_OMAP3) += prcm.o cm2xxx_3xxx.o > prm2xxx_3xxx.o \ > obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \ > cm44xx.o prcm_mpu44xx.o \ > prminst44xx.o vc44xx_data.o \ > - vp44xx_data.o > + vp44xx_data.o temp_sensor4460_data.o > > # OMAP voltage domains > ifeq ($(CONFIG_PM),y) > diff --git a/arch/arm/mach-omap2/temp_sensor4460_data.c > b/arch/arm/mach-omap2/temp_sensor4460_data.c > new file mode 100644 > index 0000000..294963d > --- /dev/null > +++ b/arch/arm/mach-omap2/temp_sensor4460_data.c > @@ -0,0 +1,63 @@ > +/* > + * OMAP4460 on die Temperature sensor data file > + * > + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ > + * Author: J Keerthy <[email protected]> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + * > + */ > + > +#include <linux/slab.h> > +#include "control.h" > +#include <plat/temperature_sensor.h> > + > +/* > + * OMAP4460 has one instance of thermal sensor for MPU > + * need to describe the individual bit fields > + */ > +struct omap_temp_sensor_registers omap_mpu_temp_sensor_registers = { > + .temp_sensor_ctrl = OMAP4460_TEMP_SENSOR_CTRL_OFFSET, > + .bgap_tempsoff_mask = OMAP4460_BGAP_TEMPSOFF_MASK, > + .bgap_soc_mask = OMAP4460_BGAP_TEMP_SENSOR_SOC_MASK, > + .bgap_eocz_mask = OMAP4460_BGAP_TEMP_SENSOR_EOCZ_MASK, > + .bgap_dtemp_mask = OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK, > + > + .bgap_mask_ctrl = OMAP4460_BGAP_CTRL_OFFSET, > + .mask_hot_mask = OMAP4460_MASK_HOT_MASK, > + .mask_cold_mask = OMAP4460_MASK_COLD_MASK, > + > + .bgap_mode_ctrl = OMAP4460_BGAP_CTRL_OFFSET, > + .mode_ctrl_mask = OMAP4460_SINGLE_MODE_MASK, > + > + .bgap_counter = OMAP4460_BGAP_COUNTER_OFFSET, > + .counter_mask = OMAP4460_COUNTER_MASK, > + > + .bgap_threshold = OMAP4460_BGAP_THRESHOLD_OFFSET, > + .threshold_thot_mask = OMAP4460_T_HOT_MASK, > + .threshold_tcold_mask = OMAP4460_T_COLD_MASK, > + > + .thsut_threshold = OMAP4460_BGAP_TSHUT_OFFSET, > + .tshut_hot_mask = OMAP4460_TSHUT_HOT_MASK, > + .tshut_cold_mask = OMAP4460_TSHUT_COLD_MASK, > + > + .bgap_status = OMAP4460_BGAP_STATUS_OFFSET, > + .status_clean_stop_mask = OMAP4460_CLEAN_STOP_MASK, > + .status_bgap_alert_mask = OMAP4460_BGAP_ALERT_MASK, > + .status_hot_mask = OMAP4460_HOT_FLAG_MASK, > + .status_cold_mask = OMAP4460_COLD_FLAG_MASK, > + > + .bgap_efuse = OMAP4460_FUSE_OPP_BGAP, > +}; > diff --git a/arch/arm/plat-omap/include/plat/temperature_sensor.h > b/arch/arm/plat-omap/include/plat/temperature_sensor.h > new file mode 100644 > index 0000000..a3186f9 > --- /dev/null > +++ b/arch/arm/plat-omap/include/plat/temperature_sensor.h > @@ -0,0 +1,89 @@ > +/* > + * OMAP Temperature sensor header file > + * > + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ > + * Author: J Keerthy <[email protected]> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + * > + */ > + > +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_TEMPERATURE_SENSOR_H > +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_TEMPERATURE_SENSOR_H > + > +/* Offsets from the base of temperature sensor registers */ > + > +#define OMAP4460_TEMP_SENSOR_CTRL_OFFSET 0x00 > +#define OMAP4460_BGAP_CTRL_OFFSET 0x4c > +#define OMAP4460_BGAP_COUNTER_OFFSET 0x50 > +#define OMAP4460_BGAP_THRESHOLD_OFFSET 0x54 > +#define OMAP4460_BGAP_TSHUT_OFFSET 0x58 > +#define OMAP4460_BGAP_STATUS_OFFSET 0x5c > +#define OMAP4460_FUSE_OPP_BGAP -0xcc > + > +/* > + * The register offsets and but fields might change across ^ bit fields.
-- balbi
signature.asc
Description: Digital signature
