On Thu, Aug 18, 2011 at 04:22:14PM +0530, Keerthy wrote:
...
> +int omap_temp_sensor_device_idle(struct omap_device *od)
> +{
> +     struct  omap_temp_sensor_registers      *registers;
> +     struct  resource                        *mem;
> +     void    __iomem                         *phy_base;
> +     unsigned long                           timeout;
> +     u32                                     ret = 0, temp;
> +
> +     mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0);
> +     if (!mem) {
> +             dev_err(&od->pdev.dev, "no mem resource\n");
> +             ret = -EINVAL;
> +             goto plat_res_err;
> +     }
> +
> +     phy_base = ioremap(mem->start, resource_size(mem));

Check NULL return.

> +
> +     if (!strcmp(od->hwmods[0]->dev_attr, "mpu"))
> +             registers = &omap_mpu_temp_sensor_registers;
> +
> +     temp = __raw_readl(phy_base + registers->temp_sensor_ctrl);

Compile warning on possible use of uninitialized value?

Suggest return error if string comparison (ugh) does not match.

> +     temp |= registers->bgap_tempsoff_mask;
> +
> +     /* BGAP_TEMPSOFF should be set to 1 before gating clock */
> +     __raw_writel(temp, phy_base + registers->temp_sensor_ctrl);
> +     temp = __raw_readl(phy_base + registers->bgap_status);
> +     timeout = jiffies + msecs_to_jiffies(5);
> +
> +     /* wait till the clean stop bit is set or till the timeout expires */
> +     while (!(temp | registers->status_clean_stop_mask) &&
> +                     !(time_after(jiffies, timeout))) {
> +             temp = __raw_readl(phy_base + registers->bgap_status);
> +             usleep_range(500, 2000);
> +     }
> +
> +     if (time_after(jiffies, timeout))
> +             dev_err(&od->pdev.dev, "Clean stop bit not set\n");
> +
> +     ret = omap_device_idle_hwmods(od);
> +
> +plat_res_err:
> +     return ret;

phy_base not saved anywhere, VM leak.  Need iounmap(phy_base).

> +}
> +
> +int omap_temp_sensor_device_activate(struct omap_device *od)
> +{
> +     struct  omap_temp_sensor_registers      *registers;
> +     struct  resource                        *mem;
> +     void    __iomem                         *phy_base;
> +     u32                                     ret = 0, temp;
> +
> +     ret = omap_device_enable_hwmods(od);
> +     if (ret < 0)
> +             return ret;
> +     mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0);
> +     if (!mem) {
> +             dev_err(&od->pdev.dev, "no mem resource\n");
> +             return -EINVAL;
> +     }
> +
> +     phy_base = ioremap(mem->start, resource_size(mem));

Check NULL return.

> +
> +     if (!strcmp(od->hwmods[0]->dev_attr, "mpu"))
> +             registers = &omap_mpu_temp_sensor_registers;
> +
> +     temp = __raw_readl(phy_base + registers->temp_sensor_ctrl);

Error out if not "mpu".

> +     temp &= ~(registers->bgap_tempsoff_mask);
> +     /* BGAP_TEMPSOFF should be reset to 0 */
> +     __raw_writel(temp,
> +                     phy_base + registers->temp_sensor_ctrl);
> +
> +     return 0;

iounmap(phy_base)

> +}
> +
> +static struct omap_device_pm_latency omap_temp_sensor_latency[] = {
> +     {
> +             .deactivate_func = omap_temp_sensor_device_idle,
> +             .activate_func =  omap_temp_sensor_device_activate,
> +             .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
> +     }
> +};
> +
> +static DEFINE_IDR(temp_sensor_device_idr);
> +
> +static int temp_sensor_dev_init(struct omap_hwmod *oh, void *user)
> +{
> +     struct  omap_temp_sensor_pdata          *temp_sensor_pdata;
> +     struct  omap_device                     *od;
> +     struct  omap_temp_sensor_dev_attr       *temp_sensor_dev_attr;
> +     int                                     ret = 0;
> +     int                                     num;
> +     struct  mutex                   sensor_mutex;   /* sensor mutex */
> +
> +     mutex_init(&sensor_mutex);
> +
> +     temp_sensor_pdata =
> +         kzalloc(sizeof(*temp_sensor_pdata), GFP_KERNEL);
> +     if (!temp_sensor_pdata) {
> +             dev_err(&oh->od->pdev.dev,
> +                     "Unable to allocate memory for temp sensor pdata\n");
> +             return -ENOMEM;
> +     }
> +
> +     mutex_lock(&sensor_mutex);

Mutex just init'ed above, this code can't run concurrent with any
other accessors.

> +     ret = idr_pre_get(&temp_sensor_device_idr, GFP_KERNEL);
> +     if (ret < 0) {
> +             mutex_unlock(&sensor_mutex);
> +             goto fail_id;
> +     }
> +     ret = idr_get_new(&temp_sensor_device_idr, temp_sensor_pdata, &num);
> +     if (ret < 0) {
> +             mutex_unlock(&sensor_mutex);
> +             goto fail_id;
> +     }
> +     mutex_unlock(&sensor_mutex);
> +
> +     temp_sensor_dev_attr = oh->dev_attr;
> +     if (!strcmp(temp_sensor_dev_attr->name, "mpu"))
> +             temp_sensor_pdata->registers = &omap_mpu_temp_sensor_registers;
> +
> +     od = omap_device_build("omap_temp_sensor", num,
> +             oh, temp_sensor_pdata, sizeof(*temp_sensor_pdata),
> +            omap_temp_sensor_latency,
> +                     ARRAY_SIZE(omap_temp_sensor_latency), 0);

Inconsistent tabbing.

> +     if (IS_ERR(od)) {
> +             dev_warn(&oh->od->pdev.dev,
> +                     "Could not build omap_device for %s\n", oh->name);
> +             ret = PTR_ERR(od);
> +     }
> +
> +fail_id:
> +     kfree(temp_sensor_pdata);
> +
> +     return ret;
> +}


Todd
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to