From: Afzal Mohammed <[email protected]> This patch updates the common machine specific source files for support for AM33XX/AM335x with cpu type, macros for identification of AM33XX/AM335X device.
Signed-off-by: Afzal Mohammed <[email protected]> Signed-off-by: Vaibhav Hiremath <[email protected]> --- arch/arm/mach-omap2/clock3xxx_data.c | 6 +++++- arch/arm/mach-omap2/common.c | 16 ++++++++++++++++ arch/arm/mach-omap2/id.c | 10 ++++++++-- arch/arm/mach-omap2/io.c | 25 +++++++++++++++++++++++++ arch/arm/mach-omap2/serial.c | 6 +++--- arch/arm/plat-omap/include/plat/am33xx.h | 25 +++++++++++++++++++++++++ arch/arm/plat-omap/include/plat/common.h | 1 + arch/arm/plat-omap/include/plat/hardware.h | 1 + arch/arm/plat-omap/include/plat/io.h | 20 ++++++++++++++++++++ arch/arm/plat-omap/include/plat/omap34xx.h | 2 ++ arch/arm/plat-omap/io.c | 5 +++++ 11 files changed, 111 insertions(+), 6 deletions(-) create mode 100644 arch/arm/plat-omap/include/plat/am33xx.h diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index dadb8c6..2ee472c 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3493,6 +3493,9 @@ int __init omap3xxx_clk_init(void) } else if (cpu_is_ti816x()) { cpu_mask = RATE_IN_TI816X; cpu_clkflg = CK_TI816X; + } else if (cpu_is_am33xx()) { + cpu_mask = RATE_IN_AM33XX; + cpu_clkflg = CK_AM33XX; } else if (cpu_is_omap34xx()) { if (omap_rev() == OMAP3430_REV_ES1_0) { cpu_mask = RATE_IN_3430ES1; @@ -3576,7 +3579,8 @@ int __init omap3xxx_clk_init(void) * Lock DPLL5 -- here only until other device init code can * handle this */ - if (!cpu_is_ti816x() && (omap_rev() >= OMAP3430_REV_ES2_0)) + if (!cpu_is_ti816x() && !cpu_is_am33xx() && + (omap_rev() >= OMAP3430_REV_ES2_0)) omap3_clk_lock_dpll5(); /* Avoid sleeping during omap3_core_dpll_m2_set_rate() */ diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 3f20cbb..395a9b6 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -119,6 +119,22 @@ void __init omap2_set_globals_ti816x(void) { __omap2_set_globals(&ti816x_globals); } + +#define AM33XX_TAP_BASE (AM33XX_CTRL_BASE + \ + TI816X_CONTROL_DEVICE_ID - 0x204) + +static struct omap_globals am33xx_globals = { + .class = OMAP343X_CLASS, + .tap = OMAP2_L4_IO_ADDRESS(AM33XX_TAP_BASE), + .ctrl = AM33XX_CTRL_BASE, + .prm = AM33XX_PRCM_BASE, + .cm = AM33XX_PRCM_BASE, +}; + +void __init omap2_set_globals_am33xx(void) +{ + __omap2_set_globals(&am33xx_globals); +} #endif #if defined(CONFIG_ARCH_OMAP4) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index d27daf9..540b6f1 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -337,6 +337,10 @@ static void __init omap3_check_revision(const char **cpu_rev) break; } break; + case 0xb944: + omap_revision = AM335X_REV_ES1_0; + *cpu_rev = "1.0"; + break; default: /* Unknown default to latest silicon rev as default */ omap_revision = OMAP3630_REV_ES1_2; @@ -429,6 +433,8 @@ static void __init omap3_cpuinfo(const char *cpu_rev) cpu_name = (omap3_has_sgx()) ? "AM3517" : "AM3505"; } else if (cpu_is_ti816x()) { cpu_name = "TI816X"; + } else if (cpu_is_am335x()) { + cpu_name = "AM335X"; } else if (omap3_has_iva() && omap3_has_sgx()) { /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ cpu_name = "OMAP3430/3530"; @@ -469,8 +475,8 @@ void __init omap2_check_revision(void) } else if (cpu_is_omap34xx()) { omap3_check_revision(&cpu_rev); - /* TI816X doesn't have feature register */ - if (!cpu_is_ti816x()) + /* TI816X/AM335X doesn't have feature register */ + if (!cpu_is_ti816x() && !cpu_is_am33xx()) omap3_check_features(); else ti816x_check_features(); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 40b6d47..ccd50de 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -182,7 +182,24 @@ static struct map_desc omapti816x_io_desc[] __initdata = { .pfn = __phys_to_pfn(L4_34XX_PHYS), .length = L4_34XX_SIZE, .type = MT_DEVICE + } +}; +#endif + +#ifdef CONFIG_SOC_OMAPAM33XX +static struct map_desc omapam33xx_io_desc[] __initdata = { + { + .virtual = L4_34XX_VIRT, + .pfn = __phys_to_pfn(L4_34XX_PHYS), + .length = L4_34XX_SIZE, + .type = MT_DEVICE }, + { + .virtual = L4_WK_AM33XX_VIRT, + .pfn = __phys_to_pfn(L4_WK_AM33XX_PHYS), + .length = L4_WK_AM33XX_SIZE, + .type = MT_DEVICE + } }; #endif @@ -286,6 +303,14 @@ void __init omapti816x_map_common_io(void) } #endif +#ifdef CONFIG_SOC_OMAPAM33XX +void __init omapam33xx_map_common_io(void) +{ + iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc)); + _omap2_map_common_io(); +} +#endif + #ifdef CONFIG_ARCH_OMAP4 void __init omap44xx_map_common_io(void) { diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 466fc72..b7782ee 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -486,7 +486,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart) mod_timer(&uart->timer, jiffies + uart->timeout); omap_uart_smart_idle_enable(uart, 0); - if (cpu_is_omap34xx() && !cpu_is_ti816x()) { + if (cpu_is_omap34xx() && !(cpu_is_ti816x() || cpu_is_am33xx())) { u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD; u32 wk_mask = 0; u32 padconf = 0; @@ -768,7 +768,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) */ uart->regshift = p->regshift; uart->membase = p->membase; - if (cpu_is_omap44xx() || cpu_is_ti816x()) + if (cpu_is_omap44xx() || cpu_is_ti816x() || cpu_is_am33xx()) uart->errata |= UART_ERRATA_FIFO_FULL_ABORT; else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF) >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) @@ -851,7 +851,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) } /* Enable the MDR1 errata for OMAP3 */ - if (cpu_is_omap34xx() && !cpu_is_ti816x()) + if (cpu_is_omap34xx() && !(cpu_is_ti816x() || cpu_is_am33xx())) uart->errata |= UART_ERRATA_i202_MDR1_ACCESS; } diff --git a/arch/arm/plat-omap/include/plat/am33xx.h b/arch/arm/plat-omap/include/plat/am33xx.h new file mode 100644 index 0000000..06c19bb --- /dev/null +++ b/arch/arm/plat-omap/include/plat/am33xx.h @@ -0,0 +1,25 @@ +/* + * This file contains the address info for various AM33XX modules. + * + * Copyright (C) 2011 Texas Instruments, Inc. - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_AM33XX_H +#define __ASM_ARCH_AM33XX_H + +#define L4_SLOW_AM33XX_BASE 0x48000000 + +#define AM33XX_SCM_BASE 0x44E10000 +#define AM33XX_CTRL_BASE AM33XX_SCM_BASE +#define AM33XX_PRCM_BASE 0x44E00000 + +#endif /* __ASM_ARCH_AM33XX_H */ diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 4564cc6..6827e34 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -67,6 +67,7 @@ void omap2_set_globals_243x(void); void omap2_set_globals_3xxx(void); void omap2_set_globals_443x(void); void omap2_set_globals_ti816x(void); +void omap2_set_globals_am33xx(void); /* These get called from omap2_set_globals_xxxx(), do not call these */ void omap2_set_globals_tap(struct omap_globals *); diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h index e87efe1..e6521e1 100644 --- a/arch/arm/plat-omap/include/plat/hardware.h +++ b/arch/arm/plat-omap/include/plat/hardware.h @@ -287,5 +287,6 @@ #include <plat/omap34xx.h> #include <plat/omap44xx.h> #include <plat/ti816x.h> +#include <plat/am33xx.h> #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h index d72ec85..0c54a00 100644 --- a/arch/arm/plat-omap/include/plat/io.h +++ b/arch/arm/plat-omap/include/plat/io.h @@ -73,6 +73,9 @@ #define OMAP4_L3_IO_OFFSET 0xb4000000 #define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */ +#define AM33XX_L4_WK_IO_OFFSET 0xb5000000 +#define AM33XX_L4_WK_IO_ADDRESS(pa) IOMEM((pa) + AM33XX_L4_WK_IO_OFFSET) + #define OMAP4_L3_PER_IO_OFFSET 0xb1100000 #define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET) @@ -154,6 +157,15 @@ #define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ /* + * ---------------------------------------------------------------------------- + * AM33XX specific IO mapping + * ---------------------------------------------------------------------------- + */ +#define L4_WK_AM33XX_PHYS L4_WK_AM33XX_BASE +#define L4_WK_AM33XX_VIRT (L4_WK_AM33XX_PHYS + AM33XX_L4_WK_IO_OFFSET) +#define L4_WK_AM33XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ + +/* * Need to look at the Size 4M for L4. * VPOM3430 was not working for Int controller */ @@ -291,6 +303,14 @@ static inline void omapti816x_map_common_io(void) } #endif +#ifdef CONFIG_SOC_OMAPAM33XX +extern void omapam33xx_map_common_io(void); +#else +static inline void omapam33xx_map_common_io(void) +{ +} +#endif + #ifdef CONFIG_ARCH_OMAP4 extern void omap44xx_map_common_io(void); #else diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h index b9e8588..0d818ac 100644 --- a/arch/arm/plat-omap/include/plat/omap34xx.h +++ b/arch/arm/plat-omap/include/plat/omap34xx.h @@ -35,6 +35,8 @@ #define L4_EMU_34XX_BASE 0x54000000 #define L3_34XX_BASE 0x68000000 +#define L4_WK_AM33XX_BASE 0x44C00000 + #define OMAP3430_32KSYNCT_BASE 0x48320000 #define OMAP3430_CM_BASE 0x48004800 #define OMAP3430_PRM_BASE 0x48306800 diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index f1ecfa9..25a32b2 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -88,6 +88,11 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) if (cpu_is_ti816x()) { if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE)) return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT); + } else if (cpu_is_am33xx()) { + if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE)) + return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT); + if (BETWEEN(p, L4_WK_AM33XX_PHYS, L4_WK_AM33XX_SIZE)) + return XLATE(p, L4_WK_AM33XX_PHYS, L4_WK_AM33XX_VIRT); } else if (cpu_is_omap34xx()) { if (BETWEEN(p, L3_34XX_PHYS, L3_34XX_SIZE)) return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT); -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
