On Thu, 22 Sep 2011, Keerthy wrote:

> div_ts_ck feeds only the temperature sensor functional clock
> and also has a clksel associated (for divider selection). Mapping this
> as well as the bandgap_ts_fclk the fclk of temperature sensor in clkdev table,
> so a clk_set_rate() on the div_ts_ck in the driver would have the effect of
> changing the temperature sensor clock rate indirectly.
> 
> Signed-off-by: Keerthy <[email protected]>
> Reviewed-by: Rajendra Nayak <[email protected]>
> Cc: [email protected]
> Cc: [email protected] 

Your cc's didn't take effect...

> ---
>  arch/arm/mach-omap2/clock44xx_data.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/clock44xx_data.c 
> b/arch/arm/mach-omap2/clock44xx_data.c
> index 946bf04..c51e513 100644
> --- a/arch/arm/mach-omap2/clock44xx_data.c
> +++ b/arch/arm/mach-omap2/clock44xx_data.c
> @@ -3185,9 +3185,9 @@ static struct omap_clk omap44xx_clks[] = {
>       CLK(NULL,       "aes2_fck",                     &aes2_fck,      
> CK_443X),
>       CLK(NULL,       "aess_fck",                     &aess_fck,      
> CK_443X),
>       CLK(NULL,       "bandgap_fclk",                 &bandgap_fclk,  
> CK_443X),
> -     CLK(NULL,       "bandgap_ts_fclk",              &bandgap_ts_fclk,       
> CK_446X),
> +     CLK("omap4460plus_scm.0",       "fck",          &bandgap_ts_fclk,       
> CK_446X),
>       CLK(NULL,       "des3des_fck",                  &des3des_fck,   
> CK_443X),
> -     CLK(NULL,       "div_ts_ck",                    &div_ts_ck,     
> CK_446X),
> +     CLK("omap4460plus_scm.0",       "div_ck",                       
> &div_ts_ck,     CK_446X),

Clearly this device is incorrectly named.  You're setting up a clkdev 
entry that's marked as being valid for OMAP4430, but your device is called 
"omap4460plus_scm".  They can't both be right...


>       CLK(NULL,       "dmic_sync_mux_ck",             &dmic_sync_mux_ck,      
> CK_443X),
>       CLK(NULL,       "dmic_fck",                     &dmic_fck,      
> CK_443X),
>       CLK(NULL,       "dsp_fck",                      &dsp_fck,       
> CK_443X),
> -- 
> 1.7.0.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


- Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to