Voltages for different operating modes are now provided by vc_params. Oscillator setup times are handled as board specific.
Signed-off-by: Tero Kristo <[email protected]> --- arch/arm/mach-omap2/omap_twl.c | 25 ------------------------- arch/arm/mach-omap2/vc.h | 1 - 2 files changed, 0 insertions(+), 26 deletions(-) diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index df4e7c3..62ed050 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -141,11 +141,6 @@ static u8 twl6030_uv_to_vsel(unsigned long uv) static struct omap_voltdm_pmic omap3_mpu_pmic = { .slew_rate = 4000, .step_size = 12500, - .on_volt = 1200000, - .onlp_volt = 1000000, - .ret_volt = 975000, - .off_volt = 600000, - .volt_setup_time = 0xfff, .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX, @@ -162,11 +157,6 @@ static struct omap_voltdm_pmic omap3_mpu_pmic = { static struct omap_voltdm_pmic omap3_core_pmic = { .slew_rate = 4000, .step_size = 12500, - .on_volt = 1200000, - .onlp_volt = 1000000, - .ret_volt = 975000, - .off_volt = 600000, - .volt_setup_time = 0xfff, .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX, @@ -183,11 +173,6 @@ static struct omap_voltdm_pmic omap3_core_pmic = { static struct omap_voltdm_pmic omap4_mpu_pmic = { .slew_rate = 4000, .step_size = 12660, - .on_volt = 1375000, - .onlp_volt = 1375000, - .ret_volt = 830000, - .off_volt = 0, - .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, @@ -205,11 +190,6 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = { static struct omap_voltdm_pmic omap4_iva_pmic = { .slew_rate = 4000, .step_size = 12660, - .on_volt = 1188000, - .onlp_volt = 1188000, - .ret_volt = 830000, - .off_volt = 0, - .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, @@ -227,11 +207,6 @@ static struct omap_voltdm_pmic omap4_iva_pmic = { static struct omap_voltdm_pmic omap4_core_pmic = { .slew_rate = 4000, .step_size = 12660, - .on_volt = 1200000, - .onlp_volt = 1200000, - .ret_volt = 830000, - .off_volt = 0, - .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX, diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index ec50643..e6fdd23 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -80,7 +80,6 @@ struct omap_vc_channel { u16 i2c_slave_addr; u16 volt_reg_addr; u16 cmd_reg_addr; - u16 setup_time; u8 cfg_channel; bool i2c_high_speed; -- 1.7.4.1 Texas Instruments Oy, Porkkalankatu 22, 00180 Helsinki, Finland. Business ID: 0115040-6. Domicile: Helsinki -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
