Tero Kristo <t-kri...@ti.com> writes:
> Voltages for different operating modes are now provided by vc_params.
> Oscillator setup times are handled as board specific.
>
> Signed-off-by: Tero Kristo <t-kri...@ti.com>
These should be removed in the previous patches.
That gets at a bigger problem with this series in that it's not
bisectable. For example, these fields are removed in PATCH 2/11 but
their usage isn't removed until here. That means that after 2/11,
things will no longer compile.
Probably the best way to do this is to just combine patches 2, 3, 4 and
this one. That way it's also obvious that the voltage values added in
patches 3 & 4 are just being moved, and not being invented out of thin air.
Kevin
> ---
> arch/arm/mach-omap2/omap_twl.c | 25 -------------------------
> arch/arm/mach-omap2/vc.h | 1 -
> 2 files changed, 0 insertions(+), 26 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
> index df4e7c3..62ed050 100644
> --- a/arch/arm/mach-omap2/omap_twl.c
> +++ b/arch/arm/mach-omap2/omap_twl.c
> @@ -141,11 +141,6 @@ static u8 twl6030_uv_to_vsel(unsigned long uv)
> static struct omap_voltdm_pmic omap3_mpu_pmic = {
> .slew_rate = 4000,
> .step_size = 12500,
> - .on_volt = 1200000,
> - .onlp_volt = 1000000,
> - .ret_volt = 975000,
> - .off_volt = 600000,
> - .volt_setup_time = 0xfff,
> .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
> .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
> .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
> @@ -162,11 +157,6 @@ static struct omap_voltdm_pmic omap3_mpu_pmic = {
> static struct omap_voltdm_pmic omap3_core_pmic = {
> .slew_rate = 4000,
> .step_size = 12500,
> - .on_volt = 1200000,
> - .onlp_volt = 1000000,
> - .ret_volt = 975000,
> - .off_volt = 600000,
> - .volt_setup_time = 0xfff,
> .vp_erroroffset = OMAP3_VP_CONFIG_ERROROFFSET,
> .vp_vstepmin = OMAP3_VP_VSTEPMIN_VSTEPMIN,
> .vp_vstepmax = OMAP3_VP_VSTEPMAX_VSTEPMAX,
> @@ -183,11 +173,6 @@ static struct omap_voltdm_pmic omap3_core_pmic = {
> static struct omap_voltdm_pmic omap4_mpu_pmic = {
> .slew_rate = 4000,
> .step_size = 12660,
> - .on_volt = 1375000,
> - .onlp_volt = 1375000,
> - .ret_volt = 830000,
> - .off_volt = 0,
> - .volt_setup_time = 0,
> .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
> .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
> .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
> @@ -205,11 +190,6 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = {
> static struct omap_voltdm_pmic omap4_iva_pmic = {
> .slew_rate = 4000,
> .step_size = 12660,
> - .on_volt = 1188000,
> - .onlp_volt = 1188000,
> - .ret_volt = 830000,
> - .off_volt = 0,
> - .volt_setup_time = 0,
> .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
> .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
> .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
> @@ -227,11 +207,6 @@ static struct omap_voltdm_pmic omap4_iva_pmic = {
> static struct omap_voltdm_pmic omap4_core_pmic = {
> .slew_rate = 4000,
> .step_size = 12660,
> - .on_volt = 1200000,
> - .onlp_volt = 1200000,
> - .ret_volt = 830000,
> - .off_volt = 0,
> - .volt_setup_time = 0,
> .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET,
> .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN,
> .vp_vstepmax = OMAP4_VP_VSTEPMAX_VSTEPMAX,
> diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
> index ec50643..e6fdd23 100644
> --- a/arch/arm/mach-omap2/vc.h
> +++ b/arch/arm/mach-omap2/vc.h
> @@ -80,7 +80,6 @@ struct omap_vc_channel {
> u16 i2c_slave_addr;
> u16 volt_reg_addr;
> u16 cmd_reg_addr;
> - u16 setup_time;
> u8 cfg_channel;
> bool i2c_high_speed;
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
