On Fri, Dec 09, 2011 at 03:02:41PM +0100, Benoit Cousson wrote:
> This mainly reverts the commit that was adding the i2c static init.
> 
> Since the i2c and twl nodes are now present, there is no need
> for the static initialization anymore.
> 
> Signed-off-by: Benoit Cousson <[email protected]>
> Cc: Tony Lindgren <[email protected]>

Acked-by: Grant Likely <[email protected]>

> ---
>  arch/arm/mach-omap2/board-generic.c |   48 +---------------------------------
>  1 files changed, 2 insertions(+), 46 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-generic.c 
> b/arch/arm/mach-omap2/board-generic.c
> index 16c301e..63a2495 100644
> --- a/arch/arm/mach-omap2/board-generic.c
> +++ b/arch/arm/mach-omap2/board-generic.c
> @@ -15,7 +15,6 @@
>  #include <linux/of_irq.h>
>  #include <linux/of_platform.h>
>  #include <linux/irqdomain.h>
> -#include <linux/i2c/twl.h>
>  
>  #include <mach/hardware.h>
>  #include <asm/hardware/gic.h>
> @@ -36,34 +35,6 @@ static void __init omap_init_irq(void)
>       of_irq_init(irq_match);
>  }
>  
> -/*
> - * XXX: Still needed to boot until the i2c & twl driver is adapted to
> - * device-tree
> - */
> -#ifdef CONFIG_ARCH_OMAP4
> -static struct twl4030_platform_data sdp4430_twldata = {
> -     .irq_base       = TWL6030_IRQ_BASE,
> -     .irq_end        = TWL6030_IRQ_END,
> -};
> -
> -static void __init omap4_i2c_init(void)
> -{
> -     omap4_pmic_init("twl6030", &sdp4430_twldata);
> -}
> -#endif
> -
> -#ifdef CONFIG_ARCH_OMAP3
> -static struct twl4030_platform_data beagle_twldata = {
> -     .irq_base       = TWL4030_IRQ_BASE,
> -     .irq_end        = TWL4030_IRQ_END,
> -};
> -
> -static void __init omap3_i2c_init(void)
> -{
> -     omap3_pmic_init("twl4030", &beagle_twldata);
> -}
> -#endif
> -
>  static struct of_device_id omap_dt_match_table[] __initdata = {
>       { .compatible = "simple-bus", },
>       { .compatible = "ti,omap-infra", },
> @@ -78,21 +49,6 @@ static void __init omap_generic_init(void)
>       of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
>  }
>  
> -#ifdef CONFIG_ARCH_OMAP4
> -static void __init omap4_init(void)
> -{
> -     omap4_i2c_init();
> -     omap_generic_init();
> -}
> -#endif
> -
> -#ifdef CONFIG_ARCH_OMAP3
> -static void __init omap3_init(void)
> -{
> -     omap3_i2c_init();
> -     omap_generic_init();
> -}
> -#endif
>  
>  #ifdef CONFIG_SOC_OMAP2420
>  static const char *omap242x_boards_compat[] __initdata = {
> @@ -145,7 +101,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened 
> Device Tree)")
>       .init_early     = omap3430_init_early,
>       .init_irq       = omap_init_irq,
>       .handle_irq     = omap3_intc_handle_irq,
> -     .init_machine   = omap3_init,
> +     .init_machine   = omap_generic_init,
>       .timer          = &omap3_timer,
>       .dt_compat      = omap3_boards_compat,
>  MACHINE_END
> @@ -164,7 +120,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened 
> Device Tree)")
>       .init_early     = omap4430_init_early,
>       .init_irq       = omap_init_irq,
>       .handle_irq     = gic_handle_irq,
> -     .init_machine   = omap4_init,
> +     .init_machine   = omap_generic_init,
>       .timer          = &omap4_timer,
>       .dt_compat      = omap4_boards_compat,
>  MACHINE_END
> -- 
> 1.7.0.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to