On Fri, Dec 09, 2011 at 03:02:38PM +0100, Benoit Cousson wrote:
> Update pandaboard dts file with required clock frequencies
> for the i2c client devices existing on pandaboard.
> 
> Add the twl6030 node in i2c1 controller.
> 
> This is the minimal support needed to boot OMAP4 boards
> without any crash.
> The support for all the features included in this MFD will be
> added later.
> 
> Add a generic i2c EEPROM entry.
> 
> Signed-off-by: Benoit Cousson <[email protected]>
> Cc: Grant Likely <[email protected]>

Acked-by: Grant Likely <[email protected]>

> ---
>  arch/arm/boot/dts/omap4-panda.dts |   45 
> +++++++++++++++++++++++++++++++++++++
>  1 files changed, 45 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/omap4-panda.dts 
> b/arch/arm/boot/dts/omap4-panda.dts
> index 9755ad5..b66bcd6 100644
> --- a/arch/arm/boot/dts/omap4-panda.dts
> +++ b/arch/arm/boot/dts/omap4-panda.dts
> @@ -18,3 +18,48 @@
>               reg = <0x80000000 0x40000000>; /* 1 GB */
>       };
>  };
> +
> +&i2c1 {
> +     clock-frequency = <400000>;
> +
> +     /*
> +      * Integrated Power Management Chip
> +      * http://www.ti.com/lit/ds/symlink/twl6030.pdf
> +      */
> +     twl@48 {
> +             compatible = "ti,twl6030";
> +             reg = <0x48>;
> +             /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
> +             interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
> +             interrupt-controller;
> +             #interrupt-cells = <1>;
> +             interrupt-parent = <&gic>;
> +
> +             /* twl is a MFD, so it will contain a bunch of sub-ips */
> +             rtc {
> +                     compatible = "ti,twl4030-rtc";
> +                     interrupts = <11>;
> +             };
> +     };
> +};
> +
> +&i2c2 {
> +     clock-frequency = <400000>;
> +};
> +
> +&i2c3 {
> +     clock-frequency = <100000>;
> +
> +     /*
> +      * Display monitor features are burnt in their EEPROM as EDID data.
> +      * The EEPROM is connected as I2C slave device.
> +      */
> +     eeprom@50 {
> +             compatible = "ti,eeprom";
> +             reg = <0x50>;
> +     };
> +};
> +
> +&i2c4 {
> +     clock-frequency = <400000>;
> +};
> -- 
> 1.7.0.4
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to