Remove some superfluous calls to pwrdm_clear_all_prev_pwrst(). pwrdm_pre_transition(), which appears a few lines after these calls, invokes pwrdm_clear_all_prev_pwrst() on each powerdomain -- there's no need to do it twice.
N.B.: some of us have observed that accesses to the previous powerstate registers seem to be quite slow. Although the writes removed by this patch should be buffered by the write buffer, there is a read to a PRM register immediately afterwards. That will block the OMAP3 MPU until all of those writes complete. So this patch should result in a minor performance improvement during idle entry. Signed-off-by: Paul Walmsley <[email protected]> Cc: Kevin Hilman <[email protected]> Cc: Rajendra Nayak <[email protected]> Cc: Santosh Shilimkar <[email protected]> Cc: Tero Kristo <[email protected]> --- arch/arm/mach-omap2/pm34xx.c | 5 ----- 1 files changed, 0 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index fc69875..463eb6c 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -290,11 +290,6 @@ void omap_sram_idle(void) int core_prev_state, per_prev_state; u32 sdrc_pwr = 0; - pwrdm_clear_all_prev_pwrst(mpu_pwrdm); - pwrdm_clear_all_prev_pwrst(neon_pwrdm); - pwrdm_clear_all_prev_pwrst(core_pwrdm); - pwrdm_clear_all_prev_pwrst(per_pwrdm); - mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); switch (mpu_next_state) { case PWRDM_POWER_ON: -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
