If PM runtime get_sync fails return with the error
so that no further reads/writes goes through the interface.
This will avoid possible abort.
Signed-off-by: Shubhrajyoti D <shubhrajy...@ti.com>
---
drivers/i2c/busses/i2c-omap.c | 13 ++++++++++---
1 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 8258597..95f1b2f 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -616,7 +616,9 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg
msgs[], int num)
int i;
int r;
- pm_runtime_get_sync(dev->dev);
+ r = pm_runtime_get_sync(dev->dev);
+ if (r < 0)
+ return r;
r = omap_i2c_wait_for_bb(dev);
if (r < 0)
@@ -1044,7 +1046,9 @@ omap_i2c_probe(struct platform_device *pdev)
dev->regs = (u8 *)reg_map_ip_v1;
pm_runtime_enable(dev->dev);
- pm_runtime_get_sync(dev->dev);
+ r = pm_runtime_get_sync(dev->dev);
+ if (r < 0)
+ return r;
dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
@@ -1129,12 +1133,15 @@ err_unuse_clocks:
static int __devexit omap_i2c_remove(struct platform_device *pdev)
{
struct omap_i2c_dev *dev = platform_get_drvdata(pdev);
+ int ret;
platform_set_drvdata(pdev, NULL);
free_irq(dev->irq, dev);
i2c_del_adapter(&dev->adapter);
- pm_runtime_get_sync(&pdev->dev);
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0)
+ return ret;
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
