From: Tasslehoff Kjappfot <tasskj...@gmail.com>
i2c_probe set the dev->errata flag, but omap_i2c_init cleared the flag again.
Move the errata handling to i2c_probe.
Signed-off-by: Tasslehoff Kjappfot <tasskj...@gmail.com>
Signed-off-by: Shubhrajyoti D <shubhrajy...@ti.com>
---
drivers/i2c/busses/i2c-omap.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index c113f41..51576d6 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -431,11 +431,6 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
/* Take the I2C module out of reset: */
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
- dev->errata = 0;
-
- if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
- dev->errata |= I2C_OMAP_ERRATA_I207;
-
/* Enable interrupts */
dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
@@ -1056,6 +1051,11 @@ omap_i2c_probe(struct platform_device *pdev)
dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
+ dev->errata = 0;
+
+ if (dev->flags & OMAP_I2C_FLAG_APPLY_ERRATA_I207)
+ dev->errata |= I2C_OMAP_ERRATA_I207;
+
if (dev->rev <= OMAP_I2C_REV_ON_3430_3530)
dev->errata |= I2C_OMAP3_1P153;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
