Hello,
On Wed, Jun 27, 2012 at 10:04:54PM +0400, Konstantin Baydarov wrote:
> This patch introduces a MFD core device driver for OMAP system control module.
>
> The control module allows software control of various static modes supported
> by the device.
> It is composed of two control submodules: general control module and device
> (padconfiguration) control module.
>
> Changes since previous version:
> - omap-control-core: resources aren't hardcoded, they are specified in dts
> file.
> - omap-control-core: Control module is a built-in driver - added control
> module select to ARCH_HAS_CONTROL_MODULE and ARCH_OMAP4.
> Probably, no configuration option is required!
> - omap-control-core: Added early init call that ioremaps control module IOMEM
> window, this allows access of SCM registers very early, for example from
> omap_type()
> - omap-control-core: Removed device pointer from omap-control-core API
> arguments, becuase there can be only one instance control
> module device.
> - omap-control-core: removed omap_control_get, omap_control_readl,
> omap_control_writel
> - omap-control-core: added omap_control_status_read that is used early in
> omap_type
>
> Signed-off-by: Konstantin Baydarov <[email protected]>
> Signed-off-by: J Keerthy <[email protected]>
> Signed-off-by: Kishon Vijay Abraham I <[email protected]>
> Signed-off-by: Eduardo Valentin <[email protected]>
> ---
> .../devicetree/bindings/mfd/omap_control.txt | 44 +++++++
> arch/arm/mach-omap2/Kconfig | 1 +
> arch/arm/plat-omap/Kconfig | 4 +
> drivers/mfd/Kconfig | 9 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/omap-control-core.c | 131
> ++++++++++++++++++++
> include/linux/mfd/omap_control.h | 52 ++++++++
> 7 files changed, 242 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/omap_control.txt
> create mode 100644 drivers/mfd/omap-control-core.c
> create mode 100644 include/linux/mfd/omap_control.h
>
> diff --git a/Documentation/devicetree/bindings/mfd/omap_control.txt
> b/Documentation/devicetree/bindings/mfd/omap_control.txt
> new file mode 100644
> index 0000000..46d5e7e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/omap_control.txt
> @@ -0,0 +1,44 @@
> +* Texas Instrument OMAP System Control Module (SCM) bindings
> +
> +The control module allows software control of various static modes supported
> by
> +the device. The control module controls the settings of various device
> modules
> +through register configuration and internal signals. It also controls the
> pad
> +configuration, pin functional multiplexing, and the routing of internal
> signals
> +(such as PRCM signals or DMA requests) to output pins configured for
> hardware
> +observability.
> +
> +Required properties:
> +- compatible : Should be:
> + - "ti,omap3-control" for OMAP3 support
> + - "ti,omap4-control" for OMAP4 support
> + - "ti,omap5-control" for OMAP5 support
> +
> +OMAP specific properties:
> +- ti,hwmods: Name of the hwmod associated to the control module:
> + Should be "ctrl_module_core";
> +
> +Sub-nodes:
> +- bandgap : contains the bandgap node
> +
> + The bindings details of individual bandgap device can be found in:
> + Documentation/devicetree/bindings/thermal/omap_bandgap.txt
> +
> +- usb : contains the usb phy pin control node
> +
> + The only required property for this child is:
> + - compatible = "ti,omap4-control-usb";
> +
> +Examples:
> +
> +ctrl_module_core: ctrl_module_core@4a002000 {
> + compatible = "ti,omap4-control";
> + ti,hwmods = "ctrl_module_core";
> + bandgap {
> + compatible = "ti,omap4460-bandgap";
You need to update the documentation if change the DT structure.
> + interrupts = <0 126 4>; /* talert */
> + ti,tshut-gpio = <86>; /* tshut */
> + };
> + usb {
> + compatible = "ti,omap4-usb-phy";
> + };
> +};
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 4cf5142..c2ef07c 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -52,6 +52,7 @@ config ARCH_OMAP4
> select PL310_ERRATA_727915
> select ARM_ERRATA_720789
> select ARCH_HAS_OPP
> + select ARCH_HAS_CONTROL_MODULE
> select PM_OPP if PM
> select USB_ARCH_HAS_EHCI if USB_SUPPORT
> select ARM_CPU_SUSPEND if PM
> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
> index ad95c7a..0f9b575 100644
> --- a/arch/arm/plat-omap/Kconfig
> +++ b/arch/arm/plat-omap/Kconfig
> @@ -5,6 +5,10 @@ menu "TI OMAP Common Features"
> config ARCH_OMAP_OTG
> bool
>
> +config ARCH_HAS_CONTROL_MODULE
> + bool
> + select MFD_OMAP_CONTROL
> +
OK now I got what you meant in patch 0. Fine for me.
> choice
> prompt "OMAP System Type"
> default ARCH_OMAP2PLUS
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index e129c82..d0c5456 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -822,6 +822,15 @@ config MFD_WL1273_CORE
> driver connects the radio-wl1273 V4L2 module and the wl1273
> audio codec.
>
> +config MFD_OMAP_CONTROL
> + bool "Texas Instruments OMAP System control module"
> + depends on ARCH_HAS_CONTROL_MODULE
> + help
> + This is the core driver for system control module. This driver
> + is responsible for creating the control module mfd child,
> + like USB-pin control, pin muxing, MMC-pbias and DDR IO dynamic
> + change for off mode.
> +
> config MFD_OMAP_USB_HOST
> bool "Support OMAP USBHS core driver"
> depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 75f6ed6..b037443 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -107,6 +107,7 @@ obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o
> obj-$(CONFIG_MFD_VX855) += vx855.o
> obj-$(CONFIG_MFD_WL1273_CORE) += wl1273-core.o
> obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
> +obj-$(CONFIG_MFD_OMAP_CONTROL) += omap-control-core.o
> obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o
> obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o
> obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
> diff --git a/drivers/mfd/omap-control-core.c b/drivers/mfd/omap-control-core.c
> new file mode 100644
> index 0000000..724c51b
> --- /dev/null
> +++ b/drivers/mfd/omap-control-core.c
> @@ -0,0 +1,131 @@
> +/*
> + * OMAP system control module driver file
> + *
> + * Copyright (C) 2011-2012 Texas Instruments Incorporated -
> http://www.ti.com/
> + * Contacts:
> + * Based on original code written by:
> + * J Keerthy <[email protected]>
> + * Moiz Sonasath <[email protected]>
> + * MFD clean up and re-factoring:
> + * Eduardo Valentin <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/export.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <linux/io.h>
> +#include <linux/err.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_address.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/omap_control.h>
> +
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +
> +void __iomem *omap_control_base;
> +
> +u32 omap_control_status_read(u16 offset)
> +{
> + return __raw_readl(omap_control_base + (offset));
> +}
> +
> +static const struct of_device_id of_omap_control_match[] = {
> + { .compatible = "ti,omap3-control", },
> + { .compatible = "ti,omap4-control", },
> + { .compatible = "ti,omap5-control", },
> + { },
> +};
> +
> +static int __devinit omap_control_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> +
> + /*
> + * Build child defvices of ctrl_module_core
> + */
> + return of_platform_populate(np, of_omap_control_match, NULL, dev);
> +}
> +
> +
> +static struct platform_driver omap_control_driver = {
> + .probe = omap_control_probe,
> + .driver = {
> + .name = "omap-control-core",
> + .owner = THIS_MODULE,
> + .of_match_table = of_omap_control_match,
> + },
> +};
> +
> +int __init omap_control_of_init(struct device_node *node,
> + struct device_node *parent)
> +{
> + struct resource res;
> +
> + if (WARN_ON(!node))
> + return -ENODEV;
> +
> + if (of_address_to_resource(node, 0, &res)) {
> + WARN(1, "unable to get intc registers\n");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
The above function is used nowhere.
> +
> +void __init of_omap_control_init(const struct of_device_id *matches)
> +{
> + struct device_node *np;
> + struct property *pp = 0;
> + unsigned long phys_base = 0;
> + size_t mapsize = 0;
> +
> + for_each_matching_node(np, matches) {
> +
> + pp = of_find_property(np, "reg", NULL);
> + if(pp) {
> + phys_base = (unsigned long)be32_to_cpup(pp->value);
> + mapsize = (size_t)be32_to_cpup(
> (void*)((char*)pp->value + 4) );
> + omap_control_base = ioremap(phys_base, mapsize);
How the reservation is going to work?
> + }
> + }
> +}
> +
> +static int __init
> +omap_control_early_initcall(void)
> +{
> + of_omap_control_init(of_omap_control_match);
> +
> + return 0;
> +}
> +early_initcall(omap_control_early_initcall);
> +
> +static int __init omap_control_init(void)
> +{
> + return platform_driver_register(&omap_control_driver);
> +}
> +postcore_initcall_sync(omap_control_init);
> +
> +static void __exit omap_control_exit(void)
> +{
> + platform_driver_unregister(&omap_control_driver);
> +}
> +module_exit(omap_control_exit);
> +early_platform_init("early_omap_control", &omap_control_driver);
early_platform_init is not needed as you are implementing the early reads in a
different way.
> +
> +MODULE_DESCRIPTION("OMAP system control module driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:omap-control-core");
> +MODULE_AUTHOR("Texas Instruments Inc.");
> diff --git a/include/linux/mfd/omap_control.h
> b/include/linux/mfd/omap_control.h
> new file mode 100644
> index 0000000..1795403
> --- /dev/null
> +++ b/include/linux/mfd/omap_control.h
> @@ -0,0 +1,52 @@
> +/*
> + * OMAP system control module header file
> + *
> + * Copyright (C) 2011-2012 Texas Instruments Incorporated -
> http://www.ti.com/
> + * Contact:
> + * J Keerthy <[email protected]>
> + * Moiz Sonasath <[email protected]>
> + * Abraham, Kishon Vijay <[email protected]>
> + * Eduardo Valentin <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + */
> +
> +#ifndef __DRIVERS_OMAP_CONTROL_H
> +#define __DRIVERS_OMAP_CONTROL_H
> +
> +#include <linux/err.h>
> +
> +/**
> + * struct system control module - scm device structure
> + * @dev: device pointer
> + * @base: Base of the temp I/O
> + * @reg_lock: protect omap_control structure
> + * @use_count: track API users
> + */
> +struct omap_control {
> + struct device *dev;
> + void __iomem *base;
> + /* protect this data structure and register access */
> + spinlock_t reg_lock;
> + int use_count;
I suppose the reg_lock and the use_count are not needed in this design?
> +};
> +
> +/* TODO: Add helpers for 16bit and byte access */
> +#ifdef CONFIG_MFD_OMAP_CONTROL
> +u32 omap_control_status_read(u16 offset);
> +#else
> +static inline u32 omap_control_status_read(u16 offset)
> +{
> + return 0;
> +}
> +#endif
> +
> +#endif /* __DRIVERS_OMAP_CONTROL_H */
> --
> 1.7.7.6
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
