Hi.
On 06/28/2012 08:50 AM, Eduardo Valentin wrote:
> Hello,
>
> On Wed, Jun 27, 2012 at 10:04:54PM +0400, Konstantin Baydarov wrote:
>> This patch introduces a MFD core device driver for OMAP system control
>> module.
>>
>> The control module allows software control of various static modes supported
>> by the device.
>> It is composed of two control submodules: general control module and device
>> (padconfiguration) control module.
>>
>> Changes since previous version:
>> - omap-control-core: resources aren't hardcoded, they are specified in dts
>> file.
>> - omap-control-core: Control module is a built-in driver - added control
>> module select to ARCH_HAS_CONTROL_MODULE and ARCH_OMAP4.
>> Probably, no configuration option is required!
>> - omap-control-core: Added early init call that ioremaps control module
>> IOMEM window, this allows access of SCM registers very early, for example
>> from omap_type()
>> - omap-control-core: Removed device pointer from omap-control-core API
>> arguments, becuase there can be only one instance control
>> module device.
>> - omap-control-core: removed omap_control_get, omap_control_readl,
>> omap_control_writel
>> - omap-control-core: added omap_control_status_read that is used early in
>> omap_type
>>
>> Signed-off-by: Konstantin Baydarov <[email protected]>
>> Signed-off-by: J Keerthy <[email protected]>
>> Signed-off-by: Kishon Vijay Abraham I <[email protected]>
>> Signed-off-by: Eduardo Valentin <[email protected]>
>> ---
>> .../devicetree/bindings/mfd/omap_control.txt | 44 +++++++
>> arch/arm/mach-omap2/Kconfig | 1 +
>> arch/arm/plat-omap/Kconfig | 4 +
>> drivers/mfd/Kconfig | 9 ++
>> drivers/mfd/Makefile | 1 +
>> drivers/mfd/omap-control-core.c | 131
>> ++++++++++++++++++++
>> include/linux/mfd/omap_control.h | 52 ++++++++
>> 7 files changed, 242 insertions(+), 0 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/mfd/omap_control.txt
>> create mode 100644 drivers/mfd/omap-control-core.c
>> create mode 100644 include/linux/mfd/omap_control.h
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/omap_control.txt
>> b/Documentation/devicetree/bindings/mfd/omap_control.txt
>> new file mode 100644
>> index 0000000..46d5e7e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mfd/omap_control.txt
>> @@ -0,0 +1,44 @@
>> +* Texas Instrument OMAP System Control Module (SCM) bindings
>> +
>> +The control module allows software control of various static modes
>> supported by
>> +the device. The control module controls the settings of various device
>> modules
>> +through register configuration and internal signals. It also controls the
>> pad
>> +configuration, pin functional multiplexing, and the routing of internal
>> signals
>> +(such as PRCM signals or DMA requests) to output pins configured for
>> hardware
>> +observability.
>> +
>> +Required properties:
>> +- compatible : Should be:
>> + - "ti,omap3-control" for OMAP3 support
>> + - "ti,omap4-control" for OMAP4 support
>> + - "ti,omap5-control" for OMAP5 support
>> +
>> +OMAP specific properties:
>> +- ti,hwmods: Name of the hwmod associated to the control module:
>> + Should be "ctrl_module_core";
>> +
>> +Sub-nodes:
>> +- bandgap : contains the bandgap node
>> +
>> + The bindings details of individual bandgap device can be found in:
>> + Documentation/devicetree/bindings/thermal/omap_bandgap.txt
>> +
>> +- usb : contains the usb phy pin control node
>> +
>> + The only required property for this child is:
>> + - compatible = "ti,omap4-control-usb";
>> +
>> +Examples:
>> +
>> +ctrl_module_core: ctrl_module_core@4a002000 {
>> + compatible = "ti,omap4-control";
>> + ti,hwmods = "ctrl_module_core";
>> + bandgap {
>> + compatible = "ti,omap4460-bandgap";
> You need to update the documentation if change the DT structure.
Ok.
>
>> + interrupts = <0 126 4>; /* talert */
>> + ti,tshut-gpio = <86>; /* tshut */
>> + };
>> + usb {
>> + compatible = "ti,omap4-usb-phy";
>> + };
>> +};
>> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
>> index 4cf5142..c2ef07c 100644
>> --- a/arch/arm/mach-omap2/Kconfig
>> +++ b/arch/arm/mach-omap2/Kconfig
>> @@ -52,6 +52,7 @@ config ARCH_OMAP4
>> select PL310_ERRATA_727915
>> select ARM_ERRATA_720789
>> select ARCH_HAS_OPP
>> + select ARCH_HAS_CONTROL_MODULE
>> select PM_OPP if PM
>> select USB_ARCH_HAS_EHCI if USB_SUPPORT
>> select ARM_CPU_SUSPEND if PM
>> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
>> index ad95c7a..0f9b575 100644
>> --- a/arch/arm/plat-omap/Kconfig
>> +++ b/arch/arm/plat-omap/Kconfig
>> @@ -5,6 +5,10 @@ menu "TI OMAP Common Features"
>> config ARCH_OMAP_OTG
>> bool
>>
>> +config ARCH_HAS_CONTROL_MODULE
>> + bool
>> + select MFD_OMAP_CONTROL
>> +
> OK now I got what you meant in patch 0. Fine for me.
>
>> choice
>> prompt "OMAP System Type"
>> default ARCH_OMAP2PLUS
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index e129c82..d0c5456 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -822,6 +822,15 @@ config MFD_WL1273_CORE
>> driver connects the radio-wl1273 V4L2 module and the wl1273
>> audio codec.
>>
>> +config MFD_OMAP_CONTROL
>> + bool "Texas Instruments OMAP System control module"
>> + depends on ARCH_HAS_CONTROL_MODULE
>> + help
>> + This is the core driver for system control module. This driver
>> + is responsible for creating the control module mfd child,
>> + like USB-pin control, pin muxing, MMC-pbias and DDR IO dynamic
>> + change for off mode.
>> +
>> config MFD_OMAP_USB_HOST
>> bool "Support OMAP USBHS core driver"
>> depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index 75f6ed6..b037443 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -107,6 +107,7 @@ obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o
>> obj-$(CONFIG_MFD_VX855) += vx855.o
>> obj-$(CONFIG_MFD_WL1273_CORE) += wl1273-core.o
>> obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
>> +obj-$(CONFIG_MFD_OMAP_CONTROL) += omap-control-core.o
>> obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o
>> obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o
>> obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
>> diff --git a/drivers/mfd/omap-control-core.c
>> b/drivers/mfd/omap-control-core.c
>> new file mode 100644
>> index 0000000..724c51b
>> --- /dev/null
>> +++ b/drivers/mfd/omap-control-core.c
>> @@ -0,0 +1,131 @@
>> +/*
>> + * OMAP system control module driver file
>> + *
>> + * Copyright (C) 2011-2012 Texas Instruments Incorporated -
>> http://www.ti.com/
>> + * Contacts:
>> + * Based on original code written by:
>> + * J Keerthy <[email protected]>
>> + * Moiz Sonasath <[email protected]>
>> + * MFD clean up and re-factoring:
>> + * Eduardo Valentin <[email protected]>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but
>> + * WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>> + * General Public License for more details.
>> + *
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/export.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/io.h>
>> +#include <linux/err.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/of_address.h>
>> +#include <linux/mfd/core.h>
>> +#include <linux/mfd/omap_control.h>
>> +
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +
>> +void __iomem *omap_control_base;
>> +
>> +u32 omap_control_status_read(u16 offset)
>> +{
>> + return __raw_readl(omap_control_base + (offset));
>> +}
>> +
>> +static const struct of_device_id of_omap_control_match[] = {
>> + { .compatible = "ti,omap3-control", },
>> + { .compatible = "ti,omap4-control", },
>> + { .compatible = "ti,omap5-control", },
>> + { },
>> +};
>> +
>> +static int __devinit omap_control_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct device_node *np = dev->of_node;
>> +
>> + /*
>> + * Build child defvices of ctrl_module_core
>> + */
>> + return of_platform_populate(np, of_omap_control_match, NULL, dev);
>> +}
>> +
>> +
>> +static struct platform_driver omap_control_driver = {
>> + .probe = omap_control_probe,
>> + .driver = {
>> + .name = "omap-control-core",
>> + .owner = THIS_MODULE,
>> + .of_match_table = of_omap_control_match,
>> + },
>> +};
>> +
>> +int __init omap_control_of_init(struct device_node *node,
>> + struct device_node *parent)
>> +{
>> + struct resource res;
>> +
>> + if (WARN_ON(!node))
>> + return -ENODEV;
>> +
>> + if (of_address_to_resource(node, 0, &res)) {
>> + WARN(1, "unable to get intc registers\n");
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
> The above function is used nowhere.
Agree.
>
>> +
>> +void __init of_omap_control_init(const struct of_device_id *matches)
>> +{
>> + struct device_node *np;
>> + struct property *pp = 0;
>> + unsigned long phys_base = 0;
>> + size_t mapsize = 0;
>> +
>> + for_each_matching_node(np, matches) {
>> +
>> + pp = of_find_property(np, "reg", NULL);
>> + if(pp) {
>> + phys_base = (unsigned long)be32_to_cpup(pp->value);
>> + mapsize = (size_t)be32_to_cpup(
>> (void*)((char*)pp->value + 4) );
>> + omap_control_base = ioremap(phys_base, mapsize);
> How the reservation is going to work?
This can be done following way:
- omap-control-core.c ioremaps and reserves SCM IOMEM window
- omap-control-core.c exports omap_control_get_base(virtual base address is
returned) to use in bandgap and usb_phy driver.
IIUC, this way was suggested by Tony.
>
>> + }
>> + }
>> +}
>> +
>> +static int __init
>> +omap_control_early_initcall(void)
>> +{
>> + of_omap_control_init(of_omap_control_match);
>> +
>> + return 0;
>> +}
>> +early_initcall(omap_control_early_initcall);
>> +
>> +static int __init omap_control_init(void)
>> +{
>> + return platform_driver_register(&omap_control_driver);
>> +}
>> +postcore_initcall_sync(omap_control_init);
>> +
>> +static void __exit omap_control_exit(void)
>> +{
>> + platform_driver_unregister(&omap_control_driver);
>> +}
>> +module_exit(omap_control_exit);
>> +early_platform_init("early_omap_control", &omap_control_driver);
> early_platform_init is not needed as you are implementing the early reads in
> a different way.
Right.
>
>> +
>> +MODULE_DESCRIPTION("OMAP system control module driver");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_ALIAS("platform:omap-control-core");
>> +MODULE_AUTHOR("Texas Instruments Inc.");
>> diff --git a/include/linux/mfd/omap_control.h
>> b/include/linux/mfd/omap_control.h
>> new file mode 100644
>> index 0000000..1795403
>> --- /dev/null
>> +++ b/include/linux/mfd/omap_control.h
>> @@ -0,0 +1,52 @@
>> +/*
>> + * OMAP system control module header file
>> + *
>> + * Copyright (C) 2011-2012 Texas Instruments Incorporated -
>> http://www.ti.com/
>> + * Contact:
>> + * J Keerthy <[email protected]>
>> + * Moiz Sonasath <[email protected]>
>> + * Abraham, Kishon Vijay <[email protected]>
>> + * Eduardo Valentin <[email protected]>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful, but
>> + * WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
>> + * General Public License for more details.
>> + *
>> + */
>> +
>> +#ifndef __DRIVERS_OMAP_CONTROL_H
>> +#define __DRIVERS_OMAP_CONTROL_H
>> +
>> +#include <linux/err.h>
>> +
>> +/**
>> + * struct system control module - scm device structure
>> + * @dev: device pointer
>> + * @base: Base of the temp I/O
>> + * @reg_lock: protect omap_control structure
>> + * @use_count: track API users
>> + */
>> +struct omap_control {
>> + struct device *dev;
>> + void __iomem *base;
>> + /* protect this data structure and register access */
>> + spinlock_t reg_lock;
>> + int use_count;
> I suppose the reg_lock and the use_count are not needed in this design?
Right.
>
>> +};
>> +
>> +/* TODO: Add helpers for 16bit and byte access */
>> +#ifdef CONFIG_MFD_OMAP_CONTROL
>> +u32 omap_control_status_read(u16 offset);
>> +#else
>> +static inline u32 omap_control_status_read(u16 offset)
>> +{
>> + return 0;
>> +}
>> +#endif
>> +
>> +#endif /* __DRIVERS_OMAP_CONTROL_H */
>> --
>> 1.7.7.6
>>
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
