On 09/13/2012 09:28 AM, AnilKumar Ch wrote: > Move pm_runtime_enable/disable calls to c_can.c driver. Current > implementation is such that platform driver is doing pm_runtime > enable/disable and core driver is doing put_sync/get_sync. > > PM runtime calls should be invoked if there is a valid device > pointer from platform driver so moving enable/disable calls > to core driver. > > Signed-off-by: AnilKumar Ch <[email protected]> > --- > Incorporated Kevin's comments on "can: c_can: Add runtime PM > support to Bosch C_CAN/D_CAN controller" patch. > > This patch is tested on AM335x-EVM and cleanly applies on > linux-can master
I'll squash this into "can: c_can: Add runtime PM support to Bosch
C_CAN/D_CAN controller".
>
> drivers/net/can/c_can/c_can.c | 18 +++++++++++++++++-
> drivers/net/can/c_can/c_can_platform.c | 5 -----
> 2 files changed, 17 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
> index aa6c5eb..e472975 100644
> --- a/drivers/net/can/c_can/c_can.c
> +++ b/drivers/net/can/c_can/c_can.c
> @@ -1155,10 +1155,23 @@ static const struct net_device_ops c_can_netdev_ops =
> {
>
> int register_c_can_dev(struct net_device *dev)
> {
> + int ret;
> + struct c_can_priv *priv = netdev_priv(dev);
> +
> + if (priv->device)
> + pm_runtime_enable(priv->device);
I'll add a static inline for these two new function, too.
> +
> dev->flags |= IFF_ECHO; /* we support local echo */
> dev->netdev_ops = &c_can_netdev_ops;
>
> - return register_candev(dev);
> + ret = register_candev(dev);
> + if (ret) {
> + if (priv->device)
> + pm_runtime_disable(priv->device);
> + return ret;
> + }
> +
> + return 0;
> }
> EXPORT_SYMBOL_GPL(register_c_can_dev);
>
> @@ -1170,6 +1183,9 @@ void unregister_c_can_dev(struct net_device *dev)
> c_can_enable_all_interrupts(priv, DISABLE_ALL_INTERRUPTS);
>
> unregister_candev(dev);
> +
> + if (priv->device)
> + pm_runtime_disable(priv->device);
> }
> EXPORT_SYMBOL_GPL(unregister_c_can_dev);
>
> diff --git a/drivers/net/can/c_can/c_can_platform.c
> b/drivers/net/can/c_can/c_can_platform.c
> index c351975..491101a 100644
> --- a/drivers/net/can/c_can/c_can_platform.c
> +++ b/drivers/net/can/c_can/c_can_platform.c
> @@ -32,7 +32,6 @@
> #include <linux/clk.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> -#include <linux/pm_runtime.h>
> #include <linux/pinctrl/consumer.h>
>
> #include <linux/can/dev.h>
> @@ -185,8 +184,6 @@ static int __devinit c_can_plat_probe(struct
> platform_device *pdev)
> goto exit_free_device;
> }
>
> - pm_runtime_enable(&pdev->dev);
> -
> dev->irq = irq;
> priv->base = addr;
> priv->device = &pdev->dev;
> @@ -209,7 +206,6 @@ static int __devinit c_can_plat_probe(struct
> platform_device *pdev)
>
> exit_clear_drvdata:
> platform_set_drvdata(pdev, NULL);
> - pm_runtime_disable(&pdev->dev);
When squaahsing both patches we see still some changes here, I'll fix
that, too.
> exit_free_device:
> free_c_can_dev(dev);
> exit_iounmap:
> @@ -239,7 +235,6 @@ static int __devexit c_can_plat_remove(struct
> platform_device *pdev)
> mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> release_mem_region(mem->start, resource_size(mem));
>
> - pm_runtime_disable(&pdev->dev);
> clk_put(priv->priv);
>
> return 0;
>
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
signature.asc
Description: OpenPGP digital signature
