Marc,
On Thu, Sep 13, 2012 at 13:18:07, Marc Kleine-Budde wrote:
> On 09/13/2012 09:28 AM, AnilKumar Ch wrote:
> > Move pm_runtime_enable/disable calls to c_can.c driver. Current
> > implementation is such that platform driver is doing pm_runtime
> > enable/disable and core driver is doing put_sync/get_sync.
> >
> > PM runtime calls should be invoked if there is a valid device
> > pointer from platform driver so moving enable/disable calls
> > to core driver.
> >
> > Signed-off-by: AnilKumar Ch <[email protected]>
> > ---
> > Incorporated Kevin's comments on "can: c_can: Add runtime PM
> > support to Bosch C_CAN/D_CAN controller" patch.
> >
> > This patch is tested on AM335x-EVM and cleanly applies on
> > linux-can master
>
> I'll squash this into "can: c_can: Add runtime PM support to Bosch
> C_CAN/D_CAN controller".
> >
> > drivers/net/can/c_can/c_can.c | 18 +++++++++++++++++-
> > drivers/net/can/c_can/c_can_platform.c | 5 -----
> > 2 files changed, 17 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
> > index aa6c5eb..e472975 100644
> > --- a/drivers/net/can/c_can/c_can.c
> > +++ b/drivers/net/can/c_can/c_can.c
> > @@ -1155,10 +1155,23 @@ static const struct net_device_ops c_can_netdev_ops
> > = {
> >
> > int register_c_can_dev(struct net_device *dev)
> > {
> > + int ret;
> > + struct c_can_priv *priv = netdev_priv(dev);
> > +
> > + if (priv->device)
> > + pm_runtime_enable(priv->device);
>
> I'll add a static inline for these two new function, too.
My bad, this should be my first change.
>
> > +
> > dev->flags |= IFF_ECHO; /* we support local echo */
> > dev->netdev_ops = &c_can_netdev_ops;
> >
> > - return register_candev(dev);
> > + ret = register_candev(dev);
> > + if (ret) {
> > + if (priv->device)
> > + pm_runtime_disable(priv->device);
> > + return ret;
> > + }
> > +
> > + return 0;
> > }
> > EXPORT_SYMBOL_GPL(register_c_can_dev);
> >
> > @@ -1170,6 +1183,9 @@ void unregister_c_can_dev(struct net_device *dev)
> > c_can_enable_all_interrupts(priv, DISABLE_ALL_INTERRUPTS);
> >
> > unregister_candev(dev);
> > +
> > + if (priv->device)
> > + pm_runtime_disable(priv->device);
> > }
> > EXPORT_SYMBOL_GPL(unregister_c_can_dev);
> >
> > diff --git a/drivers/net/can/c_can/c_can_platform.c
> > b/drivers/net/can/c_can/c_can_platform.c
> > index c351975..491101a 100644
> > --- a/drivers/net/can/c_can/c_can_platform.c
> > +++ b/drivers/net/can/c_can/c_can_platform.c
> > @@ -32,7 +32,6 @@
> > #include <linux/clk.h>
> > #include <linux/of.h>
> > #include <linux/of_device.h>
> > -#include <linux/pm_runtime.h>
> > #include <linux/pinctrl/consumer.h>
> >
> > #include <linux/can/dev.h>
> > @@ -185,8 +184,6 @@ static int __devinit c_can_plat_probe(struct
> > platform_device *pdev)
> > goto exit_free_device;
> > }
> >
> > - pm_runtime_enable(&pdev->dev);
> > -
> > dev->irq = irq;
> > priv->base = addr;
> > priv->device = &pdev->dev;
> > @@ -209,7 +206,6 @@ static int __devinit c_can_plat_probe(struct
> > platform_device *pdev)
> >
> > exit_clear_drvdata:
> > platform_set_drvdata(pdev, NULL);
> > - pm_runtime_disable(&pdev->dev);
>
> When squaahsing both patches we see still some changes here, I'll fix
> that, too.
Thanks Marc
Thanks
AnilKumar
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
