Hi Benoit,
On Monday 22 October 2012 05:37 PM, Benoit Cousson wrote:
On 10/22/2012 01:57 PM, Benoit Cousson wrote:
Hi Sourav,
On 10/22/2012 01:16 PM, Sourav wrote:
Hi Sebastien,
On Monday 22 October 2012 03:52 PM, Sebastien Guiriec wrote:
Add base address and interrupt line inside Device Tree data for
Incomplete sentence!
Signed-off-by: Sebastien Guiriec <s-guir...@ti.com>
---
arch/arm/boot/dts/omap5.dtsi | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 6c22e1b..413df94 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -237,36 +237,48 @@
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806a000 0x100>;
+ interrupts = <0 72 0x4>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806c000 0x100>;
+ interrupts = <0 73 0x4>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
+ reg = <0x48020000 0x100>;
+ interrupts = <0 74 0x4>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
+ reg = <0x4806e000 0x100>;
+ interrupts = <0 70 0x4>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
uart5: serial@48066000 {
- compatible = "ti,omap5-uart";
+ compatible = "ti,omap4-uart";
+ reg = <0x48066000 0x100>;
+ interrupts = <0 105 0x4>;
In Omap5 TRM, the interrupt number mentioned for uart5 is 138. How is
105 coming?
It is from hwmod and thus from the HW spec. It looks like the TRM is
wrong... or the HW spec :-)
ti,hwmods = "uart5";
clock-frequency = <48000000>;
};
uart6: serial@48068000 {
- compatible = "ti,omap6-uart";
+ compatible = "ti,omap4-uart";
+ reg = <0x48068000 0x100>;
+ interrupts = <0 106 0x4>;
Same here, TRM shows this number to be 139 ?
In fact, even the TRM (ES1.0 NDA vM) is aligned with these data.
Where did you see 138 and 139?
I looked at Page 6300 of the above TRM, Figure 24-60. Is this place not
correct to look
up for these data?
Regards,
Benoit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
