Hi Benoit,
On 10/22/2012 04:11 PM, Benoit Cousson wrote:
Hi Seb,
Good work. Thanks for that series.
Just update it with all the acked-by you've got from the TI driver folks
+ the minor comment and I'll pull it in the for_3.8/dts branch.
That's a detail but you should update the subject with "ARM: dts: OMAP5:
XXX" prefix for consistency with the latest naming convention.
Thanks for the information I will update the series. I was thinking that
it was the convention according to a past talk. I will update our full
audio/display feature tree with this convention.
Please, Cc the DT list as well.
Regards,
Benoit
On 10/22/2012 12:22 PM, Sebastien Guiriec wrote:
Since kernel 3.7 the DTS data are not overwriten by hwmod data we can add the
address space
and interrupt line description inside dtsi file for OMAP5. This serie is
updating the
current OMAP5 IP with missing entry.
It has been tested on OMAP5 with 3.7-audio-display feature tree.
- MMC is probing and functional
- TWL6041 probing (GPIO/I2C)
- booting (UART)
Sebastien Guiriec (4):
ARM/dts: omap5: Update GPIO with address space and interrupt
ARM/dts: omap5: Update I2C with address space and interrupts
ARM/dts: omap5: Update UART with address space and interrupts
ARM/dts: omap5: Update MMC with address space and interrupts
arch/arm/boot/dts/omap5.dtsi | 56 +++++++++++++++++++++++++++++++++++++++---
1 file changed, 52 insertions(+), 4 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
