On 10/11/2012 02:47 PM, Lokesh Vutla wrote:
> Adding EMIF device tree data for OMAP5 boards.
>
> Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
> ---
> arch/arm/boot/dts/omap5.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index 5db33f4..445aeea 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -319,5 +319,29 @@
> ti,buffer-size = <128>;
> ti,hwmods = "mcbsp3";
> };
> +
> + emif1: emif@0x4c000000 {
> + compatible = "ti,emif-4d5";
> + ti,hwmods = "emif1";
> + phy-type = <2>;
> + reg = <0x4c000000 0x3ff>;
Should 0x400. This parameter is the size, not the end address.
> + interrupts = <0 110 0x4>;
> + interrupt-parent = <&gic>;
Please remove the interrupt-parent. It is not needed since DT will use
the parent node to get it. It will avoid duplicating the entry for every
nodes.
> + hw-caps-read-idle-ctrl;
> + hw-caps-ll-interface;
> + hw-caps-temp-alert;
> + };
> +
> + emif2: emif@0x4d000000 {
> + compatible = "ti,emif-4d5";
> + ti,hwmods = "emif2";
> + phy-type = <2>;
Can you just add a comment to give more information. I know this is in
the binding documentation, but some more comment never hurt.
> + reg = <0x4d000000 0x3ff>;
0x400 as well.
> + interrupts = <0 111 0x4>;
> + interrupt-parent = <&gic>;
Ditto.
> + hw-caps-read-idle-ctrl;
> + hw-caps-ll-interface;
> + hw-caps-temp-alert;
> + };
> };
> };
>
Regards,
Benoit
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
