On 17:40-20130301, Santosh Shilimkar wrote:
> In addition to the standard power-management technique, the OMAP5
> MPU subsystem also employs an SR3-APG (mercury) power management
> technology to reduce leakage.
Mercury fast is employed here - might be good to note that.
> 
> It allows for full logic and memories retention on MPU_C0 and MPU_C1 and
> is controlled by the PRCM_MPU.
> 
> Signed-off-by: Santosh Shilimkar <[email protected]>
> ---
>  arch/arm/mach-omap2/omap-mpuss-lowpower.c |   17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c 
> b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
> index bcd2efb..9fda96b 100644
> --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
> +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
> @@ -360,6 +360,20 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu, 
> unsigned int power_state)
>  
>  
>  /*
> + * Enable Mercury Fast HG retention mode by default.
> + */
> +static void enable_mercury_retention_mode(void)
> +{
> +     u32 reg;
> +
> +     reg = omap4_prcm_mpu_read_inst_reg(OMAP54XX_PRCM_MPU_DEVICE_INST,
> +                     OMAP54XX_PRCM_MPU_PRM_PSCON_COUNT_OFFSET);
> +     reg |= BIT(24) | BIT(25);
Can we please use macros here?
we are setting BIT(25) - fast ramp-up (Mercury fast) Vs 0 (which would
have been mercury slow)
BIT(24) is mercury enable basically. OMAP4 prm-regbits-44xx.h did not
have these ofcourse, so might be a different bit file or so?
> +     omap4_prcm_mpu_write_inst_reg(reg, OMAP54XX_PRCM_MPU_DEVICE_INST,
> +                     OMAP54XX_PRCM_MPU_PRM_PSCON_COUNT_OFFSET);
> +}
> +
> +/*
>   * Initialise OMAP4 MPUSS
>   */
>  int __init omap4_mpuss_init(void)
> @@ -438,6 +452,9 @@ int __init omap4_mpuss_init(void)
>               cpu_context_offset = OMAP54XX_RM_CPU0_CPU0_CONTEXT_OFFSET;
>       }
>  
> +     if (soc_is_omap54xx())
> +             enable_mercury_retention_mode();
> +
>       return 0;
>  }
>  
> -- 
> 1.7.9.5
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to