On Saturday 02 March 2013 03:06 AM, Nishanth Menon wrote:
> On 17:40-20130301, Santosh Shilimkar wrote:
>> Add power management code to handle the CPU off mode. Separate
>> suspend finisher is used for OMAP5(Cortex-A15) because it doesn't
>> use SCU power status register and external PL310 L2 cache which makes
>> code flow bit different.
>>
>> Signed-off-by: Santosh Shilimkar <[email protected]>
>> ---
>> arch/arm/mach-omap2/omap-mpuss-lowpower.c | 31 +++++++----
>> arch/arm/mach-omap2/omap-secure.h | 1 +
>> arch/arm/mach-omap2/omap4-sar-layout.h | 2 +
>> arch/arm/mach-omap2/sleep_omap4plus.S | 80
>> +++++++++++++++++++++++++++++
>> 4 files changed, 104 insertions(+), 10 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
>> b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
>> index 9fda96b..275f9a4 100644
>> --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
>> +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
>> @@ -76,10 +76,12 @@ struct cpu_pm_ops {
>> int (*finish_suspend)(unsigned long cpu_state);
>> void (*resume)(void);
>> void (*scu_prepare)(unsigned int cpu_id, unsigned int cpu_state);
>> + void (*hotplug_restart)(void);
>> };
>>
>> extern int omap4_finish_suspend(unsigned long cpu_state);
>> extern void omap4_cpu_resume(void);
>> +extern int omap5_finish_suspend(unsigned long cpu_state);
>>
>> static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info);
>> static struct powerdomain *mpuss_pd;
>> @@ -102,6 +104,7 @@ struct cpu_pm_ops omap_pm_ops = {
>> .finish_suspend = default_finish_suspend,
>> .resume = dummy_cpu_resume,
>> .scu_prepare = dummy_scu_prepare,
>> + .hotplug_restart = dummy_cpu_resume,
>> };
>>
>> /*
>> @@ -334,7 +337,6 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int
>> power_state)
>> int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
>> {
>> unsigned int cpu_state = 0;
>> - struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu);
>>
>> if (omap_rev() == OMAP4430_REV_ES1_0)
>> return -ENXIO;
>> @@ -344,7 +346,7 @@ int __cpuinit omap4_hotplug_cpu(unsigned int cpu,
>> unsigned int power_state)
>>
>> clear_cpu_prev_pwrst(cpu);
>> set_cpu_next_pwrst(cpu, power_state);
>> - set_cpu_wakeup_addr(cpu, virt_to_phys(pm_info->secondary_startup));
>> + set_cpu_wakeup_addr(cpu, virt_to_phys(omap_pm_ops.hotplug_restart));
>> omap_pm_ops.scu_prepare(cpu, power_state);
>>
>> /*
>> @@ -379,6 +381,7 @@ static void enable_mercury_retention_mode(void)
>> int __init omap4_mpuss_init(void)
>> {
>> struct omap4_cpu_pm_info *pm_info;
>> + u32 cpu_wakeup_addr = 0;
>>
>> if (omap_rev() == OMAP4430_REV_ES1_0) {
>> WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
>> @@ -388,9 +391,13 @@ int __init omap4_mpuss_init(void)
>> sar_base = omap4_get_sar_ram_base();
>>
>> /* Initilaise per CPU PM information */
>> + if (cpu_is_omap44xx())
>> + cpu_wakeup_addr = CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
>> + else if (soc_is_omap54xx())
>> + cpu_wakeup_addr = OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
>> pm_info = &per_cpu(omap4_pm_info, 0x0);
>> pm_info->scu_sar_addr = sar_base + SCU_OFFSET0;
>> - pm_info->wkup_sar_addr = sar_base + CPU0_WAKEUP_NS_PA_ADDR_OFFSET;
>> + pm_info->wkup_sar_addr = sar_base + cpu_wakeup_addr;
>> pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET0;
>> pm_info->pwrdm = pwrdm_lookup("cpu0_pwrdm");
>> if (!pm_info->pwrdm) {
>> @@ -405,14 +412,14 @@ int __init omap4_mpuss_init(void)
>> /* Initialise CPU0 power domain state to ON */
>> pwrdm_set_next_pwrst(pm_info->pwrdm, PWRDM_POWER_ON);
>>
>> + if (cpu_is_omap44xx())
>> + cpu_wakeup_addr = CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
>> + else if (soc_is_omap54xx())
>> + cpu_wakeup_addr = OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
>> pm_info = &per_cpu(omap4_pm_info, 0x1);
>> pm_info->scu_sar_addr = sar_base + SCU_OFFSET1;
>> - pm_info->wkup_sar_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET;
>> + pm_info->wkup_sar_addr = sar_base + cpu_wakeup_addr;
>> pm_info->l2x0_sar_addr = sar_base + L2X0_SAVE_OFFSET1;
>> - if (cpu_is_omap446x())
>> - pm_info->secondary_startup = omap_secondary_startup_4460;
>> - else
>> - pm_info->secondary_startup = omap_secondary_startup;
>>
>> pm_info->pwrdm = pwrdm_lookup("cpu1_pwrdm");
>> if (!pm_info->pwrdm) {
>> @@ -445,15 +452,19 @@ int __init omap4_mpuss_init(void)
>>
>> if (cpu_is_omap44xx()) {
>> omap_pm_ops.finish_suspend = omap4_finish_suspend;
>> + omap_pm_ops.hotplug_restart = omap_secondary_startup;
> could we handle omap_pm_ops.hotplug_restart = omap_secondary_startup_4460
> here as well with the interest of keeping all function inits
> in consecutive source location?
I don't wanted to have multiple indentation and 4460 bug is just
too annoying that it is better to keep it seperate.
>> diff --git a/arch/arm/mach-omap2/omap4-sar-layout.h
>> b/arch/arm/mach-omap2/omap4-sar-layout.h
>> index 6822d0a..ee8215b 100644
>> --- a/arch/arm/mach-omap2/omap4-sar-layout.h
>> +++ b/arch/arm/mach-omap2/omap4-sar-layout.h
>> @@ -31,6 +31,8 @@
>> /* CPUx Wakeup Non-Secure Physical Address offsets in SAR_BANK3 */
>> #define CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xa04
>> #define CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xa08
>> +#define OMAP5_CPU0_WAKEUP_NS_PA_ADDR_OFFSET 0xe00
>> +#define OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET 0xe04
>>
>> #define SAR_BACKUP_STATUS_OFFSET (SAR_BANK3_OFFSET + 0x500)
>> #define SAR_SECURE_RAM_SIZE_OFFSET (SAR_BANK3_OFFSET + 0x504)
>> diff --git a/arch/arm/mach-omap2/sleep_omap4plus.S
>> b/arch/arm/mach-omap2/sleep_omap4plus.S
>> index 88ff83a..3322fc8 100644
>> --- a/arch/arm/mach-omap2/sleep_omap4plus.S
>> +++ b/arch/arm/mach-omap2/sleep_omap4plus.S
>> @@ -326,6 +326,86 @@ skip_l2en:
>>
>> b cpu_resume @ Jump to generic resume
>> ENDPROC(omap4_cpu_resume)
>> +
>> +/*
>> + * ================================
>> + * == OMAP5 CPU suspend finisher ==
>> + * ================================
>> + *
>> + * OMAP5 MPUSS states for the context save:
>> + * save_state =
>> + * 0 - Nothing lost and no need to save: MPUSS INA/CSWR
>> + * 1 - CPUx L1 and logic lost: CPU OFF, MPUSS INA/CSWR
>> + * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR
>> + * 3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF
>> + */
>> +ENTRY(omap5_finish_suspend)
>> + stmfd sp!, {r4-r12, lr}
>> + cmp r0, #0x0
>> + beq do_wfi @ No lowpower state, jump to WFI
>> +
>> + /*
>> + * Flush all data from the L1 data cache before disabling
>> + * SCTLR.C bit.
>> + */
>> + bl omap4_get_sar_ram_base
>> + ldr r9, [r0, #OMAP_TYPE_OFFSET]
>> + cmp r9, #0x1 @ Check for HS device
>> + bne skip_secure_l1_clean_op
>> + mov r0, #0 @ Clean secure L1
>> + stmfd r13!, {r4-r12, r14}
>> + ldr r12, =OMAP5_MON_CACHES_CLEAN_INDEX
>> + DO_SMC
>> + ldmfd r13!, {r4-r12, r14}
>> +skip_secure_l1_clean_op:
>> + bl v7_flush_dcache_louis
>> +
>> + /*
>> + * Clear the SCTLR.C bit to prevent further data cache
>> + * allocation. Clearing SCTLR.C would make all the data accesses
>> + * strongly ordered and would not hit the cache.
>> + */
>> + mrc p15, 0, r0, c1, c0, 0
>> + bic r0, r0, #(1 << 2) @ Disable the C bit
>> + mcr p15, 0, r0, c1, c0, 0
>> + isb
>> +
>> + /* Clean and Invalidate L1 data cache. */
>> + bl v7_flush_dcache_louis
> Curious question - once we have flushed and invalidated L1 on
> skip_secure_l1_clean_op:, we disable SCTLR.C to make all accesses SO,
> what is the need to go through clean and invalidate again? is'nt it an
> un-necessary cycle consuming NOP? What kind of data are we cleaning out
> here?
Obviously you haven't read all the old emails internally as well as
externally on this topic. Its needed.
>> +
>> + /*
>> + * Take CPU out of Symmetric Multiprocessing (SMP) mode and thus
>> + * preventing the CPU from receiving cache, TLB, or BTB
>> + * maintenance operations broadcast by other CPUs in the cluster.
>> + */
>> + mrc p15, 0, r0, c1, c1, 2 @ Read NSACR data
>> + tst r0, #(1 << 18)
>> + mrcne p15, 0, r0, c1, c0, 1
>> + bicne r0, r0, #(1 << 6) @ Disable SMP bit
>> + mcrne p15, 0, r0, c1, c0, 1
>> + isb
>> + dsb
>> +
> when save_state=3, as per the function comment:
> 3 - CPUx L1 and logic lost + GIC + L2 lost: DEVICE OFF
> But we dont flush L2 nonsecure OR secure at this point. results wont be
> pretty.
Subject adds CPU off support only. I have added the comments section in
this patch. I can move that for next patch.
> If we dont want to deal with "3", then should'nt we add an adequate
> handler on entry and remove the code comment claiming we support
> it?
> is'nt it better to squash in "[PATCH 11/15] ARM: OMAP5: PM: Add L2
> memory power down support" here?
Why. You don't need L2 support for CPU OFF. As I said I will move the
comment in further patch which seems to confused you. And sure, I will
remove that device OFF reference but still support mode where L2
can be destroyed. It can be done in MPU OSWR as well with a setting
to loose L2.
>> +do_wfi:
>> + bl omap_do_wfi
>> +
>> + /*
>> + * CPU is here when it failed to enter OFF/DORMANT or
>> + * no low power state was attempted.
> This might need a bit more clarity IMHO. successful WFI (which is
> arguably an power state if we consider ARM internal clock gating takes
> place), will reach here as well. So would OMAP CPU INA state. The
> comment is probably valid for the defined save_states in code comments
> for CPU OFF which is un-successful.
>> + */
>> + mrc p15, 0, r0, c1, c0, 0
>> + tst r0, #(1 << 2) @ Check C bit enabled?
>> + orreq r0, r0, #(1 << 2) @ Enable the C bit
>> + mcreq p15, 0, r0, c1, c0, 0
>> + isb
>> + mrc p15, 0, r0, c1, c0, 1
>> + tst r0, #(1 << 6) @ Check SMP bit enabled?
>> + orreq r0, r0, #(1 << 6)
>> + mcreq p15, 0, r0, c1, c0, 1
>> + isb
>> + dsb
>> + ldmfd sp!, {r4-r12, pc}
>> +ENDPROC(omap5_finish_suspend)
>> #endif
>>
>> #ifndef CONFIG_OMAP4_ERRATA_I688
>
> I was curious at this point -> given that we added documentation that
> we will be able to go to CPU OFF here, but I did not see an resume
> handler registered. Untill I looked down in the series to see:
>
I should have mentioned abou CPU OFF in hotplug path which doesn't
need resume entry. Will update commit message accordingly. Thanks
for comments.
regards
Santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
