Use the new TFP410 platform driver instead of the old omap_dss_driver.
Signed-off-by: Tomi Valkeinen <[email protected]>
---
arch/arm/mach-omap2/board-devkit8000.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/board-devkit8000.c
b/arch/arm/mach-omap2/board-devkit8000.c
index e90808c..d05f069 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -163,20 +163,20 @@ static struct omap_dss_board_info devkit8000_dss_data = {
#elif defined(CONFIG_MACH_DEVKIT8000_EXPANSION_DVI)
static struct tfp410_platform_data dvi_panel = {
+ .name = "dvi",
+ .source = "dpi.0",
+ .data_lines = 24,
.power_down_gpio = -1,
.i2c_bus_num = 1,
};
-static struct omap_dss_device devkit8000_dvi_device = {
- .name = "dvi",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .driver_name = "tfp410",
- .data = &dvi_panel,
- .phy.dpi.data_lines = 24,
+static struct platform_device devkit8000_dvi_device = {
+ .name = "tfp410",
+ .id = 0,
+ .dev.platform_data = &dvi_panel,
};
static struct omap_dss_device *devkit8000_dss_devices[] = {
- &devkit8000_dvi_device,
&devkit8000_tv_device,
};
@@ -452,6 +452,9 @@ static struct platform_device *devkit8000_devices[]
__initdata = {
&leds_gpio,
&keys_gpio,
&omap_dm9000_dev,
+#if defined(CONFIG_MACH_DEVKIT8000_EXPANSION_DVI)
+ &devkit8000_dvi_device,
+#endif
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
