Use the new generic-dpi-panel platform driver instead of the old omap_dss_driver.
Signed-off-by: Tomi Valkeinen <[email protected]> --- arch/arm/mach-omap2/board-ldp.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index b12fe96..78e0470 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -206,27 +206,22 @@ static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev) } static struct panel_generic_dpi_data ldp_panel_data = { + .display_name = "lcd", + .source = "dpi.0", .name = "nec_nl2432dr22-11b", + .data_lines = 18, .platform_enable = ldp_panel_enable_lcd, .platform_disable = ldp_panel_disable_lcd, }; -static struct omap_dss_device ldp_lcd_device = { - .name = "lcd", - .driver_name = "generic_dpi_panel", - .type = OMAP_DISPLAY_TYPE_DPI, - .phy.dpi.data_lines = 18, - .data = &ldp_panel_data, -}; - -static struct omap_dss_device *ldp_dss_devices[] = { - &ldp_lcd_device, +static struct platform_device ldp_lcd_device = { + .name = "generic_dpi_panel", + .id = 0, + .dev.platform_data = &ldp_panel_data, }; static struct omap_dss_board_info ldp_dss_data = { - .num_devices = ARRAY_SIZE(ldp_dss_devices), - .devices = ldp_dss_devices, - .default_device = &ldp_lcd_device, + .default_display_name = "lcd", }; static void __init ldp_display_init(void) @@ -364,6 +359,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = { static struct platform_device *ldp_devices[] __initdata = { &ldp_gpio_keys_device, + &ldp_lcd_device, }; #ifdef CONFIG_OMAP_MUX -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
