On 09/26/2013 11:06 AM, Nishanth Menon wrote:
> On 11:48-20130925, Tero Kristo wrote:
>> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
>> index 16420ae..bc11b83 100644
>> --- a/arch/arm/boot/dts/omap3.dtsi
>> +++ b/arch/arm/boot/dts/omap3.dtsi
>> @@ -533,4 +533,11 @@
>> ram-bits = <12>;
>> };
>> };
>> +
>> + clocks {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> + /include/ "omap3xxx-clocks.dtsi"
>> + };
>> };
> Clocks are introduced towards the tail of the dts -> this has a problem
> associated with it -> device nodes should be able to reference phandle
> like:
>
> devicex {
> clocks = <&sys_ck>;
> }
>
> Since all the devices on ocp and cpu0 node appears above the definition
> they fail to catch the phandle. instead, moving the clocks node as high
> in the tree as possible resolves this: something like:
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index bc11b83..0b2161d 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -24,6 +24,13 @@
> serial2 = &uart3;
> };
>
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + /include/ "omap3xxx-clocks.dtsi"
> + };
> +
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -534,10 +541,4 @@
> };
> };
>
> - clocks {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> - /include/ "omap3xxx-clocks.dtsi"
> - };
> };
>
> What do you think of the change? applies for all clock nodes in other
> dtsi as well - I will mark them as I find them.
Digging further, the above is not needed. Apologies on the noise.
below changes will be nice though..
>
> Further,
>> diff --git a/arch/arm/boot/dts/omap34xx.dtsi
>> b/arch/arm/boot/dts/omap34xx.dtsi
>> index 5355d61..2ed7c69 100644
>> --- a/arch/arm/boot/dts/omap34xx.dtsi
>> +++ b/arch/arm/boot/dts/omap34xx.dtsi
>> @@ -25,4 +25,123 @@
>> clock-latency = <300000>; /* From legacy driver */
>> };
>> };
>> -};
>> +
>> + clocks {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
> dont need to state the above two -> already done in omap3.dtsi.
>> + /include/ "omap34xx-omap36xx-clocks.dtsi"
>> + /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
>> + /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
>> + };
>> +};
> [...]
>> \ No newline at end of file
> ^^
> [...]
>> diff --git a/arch/arm/boot/dts/omap36xx.dtsi
>> b/arch/arm/boot/dts/omap36xx.dtsi
>> index f8b3765..71fb6fb 100644
>> --- a/arch/arm/boot/dts/omap36xx.dtsi
>> +++ b/arch/arm/boot/dts/omap36xx.dtsi
>> @@ -35,4 +35,124 @@
>> clock-frequency = <48000000>;
>> };
>> };
>> -};
>> +
>> + clocks {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
> ^^ here as well.
>> + /include/ "omap36xx-clocks.dtsi"
>> + /include/ "omap34xx-omap36xx-clocks.dtsi"
>> + /include/ "omap36xx-omap3430es2plus-clocks.dtsi"
>> + /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
>> + };
> [...]
>> +};
>> \ No newline at end of file
> ^^ this need fix as well.
>
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
