On 10/07/2013 12:43 PM, Roger Quadros wrote:
> Javier,
>
> On 10/05/2013 03:04 AM, Javier Martinez Canillas wrote:
>> Commit ad871c10b ("ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+
>> boards")
>> added USB OTG support for most OMAP boards but some OMAP3 boards
>> such as the IGEPv2 were not updated. This patch adds an USB OTG
>> device node to this board.
>>
>> Signed-off-by: Javier Martinez Canillas <[email protected]>
>> ---
>> arch/arm/boot/dts/omap3-igep0020.dts | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/omap3-igep0020.dts
>> b/arch/arm/boot/dts/omap3-igep0020.dts
>> index eedf0d8..903e944 100644
>> --- a/arch/arm/boot/dts/omap3-igep0020.dts
>> +++ b/arch/arm/boot/dts/omap3-igep0020.dts
>> @@ -166,3 +166,10 @@
>> smsc,save-mac-address;
>> };
>> };
>> +
>> +&usb_otg_hs {
>> + interface-type = <0>;
>> + usb-phy = <&usb2_phy>;
>
> With the PHY generic framework in Greg's usb-next branch [1], you will also
> need to add
>
> + phys = <&usb2_phy>;
> + phy-names = "usb2-phy";
>
>> + mode = <3>;
>> + power = <50>;
>> +};
>>
>
> So it would be good to test with the usb-next branch.
>
> cheers,
> -roger
>
> [1] - git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
>
Hi Roger,
Thanks for the pointer, I'll add those properties and test using the PHY generic
framework.
Thanks a lot and best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
