On 10/07/2013 01:58 PM, Benoit Cousson wrote:
> Hi Javier,
>
> On 07/10/2013 13:54, Javier Martinez Canillas wrote:
>> On 10/07/2013 12:43 PM, Roger Quadros wrote:
>>> Javier,
>>>
>>> On 10/05/2013 03:04 AM, Javier Martinez Canillas wrote:
>>>> Commit ad871c10b ("ARM: dts: OMAP: Add usb_otg and glue data to OMAP3+
>>>> boards")
>>>> added USB OTG support for most OMAP boards but some OMAP3 boards
>>>> such as the IGEPv2 were not updated. This patch adds an USB OTG
>>>> device node to this board.
>>>>
>>>> Signed-off-by: Javier Martinez Canillas <[email protected]>
>>>> ---
>>>> arch/arm/boot/dts/omap3-igep0020.dts | 7 +++++++
>>>> 1 file changed, 7 insertions(+)
>>>>
>>>> diff --git a/arch/arm/boot/dts/omap3-igep0020.dts
>>>> b/arch/arm/boot/dts/omap3-igep0020.dts
>>>> index eedf0d8..903e944 100644
>>>> --- a/arch/arm/boot/dts/omap3-igep0020.dts
>>>> +++ b/arch/arm/boot/dts/omap3-igep0020.dts
>>>> @@ -166,3 +166,10 @@
>>>> smsc,save-mac-address;
>>>> };
>>>> };
>>>> +
>>>> +&usb_otg_hs {
>>>> + interface-type = <0>;
>>>> + usb-phy = <&usb2_phy>;
>>>
>>> With the PHY generic framework in Greg's usb-next branch [1], you will also
>>> need to add
>>>
>>> + phys = <&usb2_phy>;
>>> + phy-names = "usb2-phy";
>>>
>>>> + mode = <3>;
>>>> + power = <50>;
>>>> +};
>>>>
>>>
>>> So it would be good to test with the usb-next branch.
>>>
>>> cheers,
>>> -roger
>>>
>>> [1] - git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
>>>
>>
>> Hi Roger,
>>
>> Thanks for the pointer, I'll add those properties and test using the PHY
>> generic
>> framework.
>
> Should I expect a v3 then?
>
Hi Benoit,
Yes, I'll test it and send a v3 in the next few hours, sorry for not being clear
about that.
> Benoit
>
>
>
Best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
