Dear Javier Martinez Canillas, On Sun, 1 Dec 2013 13:27:25 +0100, Javier Martinez Canillas wrote:
> > diff --git a/arch/arm/boot/dts/omap3-igep0020.dts > > b/arch/arm/boot/dts/omap3-igep0020.dts > > index d5cc792..4229e94 100644 > > --- a/arch/arm/boot/dts/omap3-igep0020.dts > > +++ b/arch/arm/boot/dts/omap3-igep0020.dts > > @@ -116,7 +116,7 @@ > > linux,mtd-name= "micron,mt29c4g96maz"; > > reg = <0 0 0>; > > nand-bus-width = <16>; > > - ti,nand-ecc-opt = "bch8"; > > + ti,nand-ecc-opt = "ham1"; > > > > gpmc,sync-clk-ps = <0>; > > gpmc,cs-on-ns = <0>; > > diff --git a/arch/arm/boot/dts/omap3-igep0030.dts > > b/arch/arm/boot/dts/omap3-igep0030.dts > > index 525e6d9..9043e97 100644 > > --- a/arch/arm/boot/dts/omap3-igep0030.dts > > +++ b/arch/arm/boot/dts/omap3-igep0030.dts > > @@ -59,7 +59,7 @@ > > linux,mtd-name= "micron,mt29c4g96maz"; > > reg = <0 0 0>; > > nand-bus-width = <16>; > > - ti,nand-ecc-opt = "bch8"; > > + ti,nand-ecc-opt = "ham1"; Tested this with 3.13-rc1, and it somewhat works, but causes some ECC error messages: # mount -t jffs2 /dev/mtdblock3 /mnt/ [ 10.423736] jffs2: CLEANMARKER node found at 0x00000000 has totlen 0xc != normal 0x0 [ 10.444671] jffs2: CLEANMARKER node found at 0x00020000 has totlen 0xc != normal 0x0 [ 10.472290] jffs2: mtd->read(0x100 bytes from 0x40000) returned ECC error [ 10.480743] jffs2: mtd->read(0x100 bytes from 0x60000) returned ECC error [ 10.489013] jffs2: mtd->read(0x100 bytes from 0x80000) returned ECC error [ 10.497283] jffs2: mtd->read(0x100 bytes from 0xa0000) returned ECC error [ 10.505126] jffs2: mtd->read(0x100 bytes from 0xc0000) returned ECC error [ 10.513458] jffs2: mtd->read(0x100 bytes from 0xe0000) returned ECC error [ 10.521667] jffs2: mtd->read(0x100 bytes from 0x100000) returned ECC error [ 10.529968] jffs2: mtd->read(0x100 bytes from 0x120000) returned ECC error [ 10.538269] jffs2: mtd->read(0x100 bytes from 0x140000) returned ECC error [ 10.546295] jffs2: mtd->read(0x100 bytes from 0x160000) returned ECC error [ 10.554534] jffs2: mtd->read(0x100 bytes from 0x180000) returned ECC error [ 10.563323] jffs2: mtd->read(0x100 bytes from 0x1a0000) returned ECC error [ 10.571685] jffs2: mtd->read(0x100 bytes from 0x1c0000) returned ECC error [ 10.579986] jffs2: mtd->read(0x100 bytes from 0x1e0000) returned ECC error [ 10.588287] jffs2: mtd->read(0x100 bytes from 0x200000) returned ECC error [ 10.596313] jffs2: mtd->read(0x100 bytes from 0x220000) returned ECC error [ 10.604522] jffs2: mtd->read(0x100 bytes from 0x240000) returned ECC error [ 10.613037] jffs2: mtd->read(0x100 bytes from 0x260000) returned ECC error [ 10.621307] jffs2: mtd->read(0x100 bytes from 0x280000) returned ECC error [ 10.629608] jffs2: mtd->read(0x100 bytes from 0x2a0000) returned ECC error [ 10.637908] jffs2: mtd->read(0x100 bytes from 0x2c0000) returned ECC error [ 10.645843] jffs2: mtd->read(0x100 bytes from 0x2e0000) returned ECC error [ 10.654113] jffs2: notice: (851) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. # # # cd /mnt/ # ls MD5SUMS foo10 foo3 foo5 foo7 foo9 foo1 foo2 foo4 foo6 foo8 # md5sum -c MD5SUMS foo1: OK foo10: OK foo2: OK foo3: OK foo4: OK foo5: OK foo6: OK foo7: OK foo8: OK foo9: OK This is with a JFFS2 image flashed after doing "nandecc sw" in U-Boot. > Just a note that this binding property got renamed for v3.13 on > > commit c66d039197e42af8867e5d0d9b904daf0fb9e6bc > Author: Pekon Gupta <pe...@ti.com> > Date: Thu Oct 24 18:20:18 2013 +0530 > > mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes > > so users using current v3.12 kernel or older should use > > ti,nand-ecc-opt = "sw"; > > instead. However, this works perfectly fine, with the same JFFS2 image, flashed in the same way in U-Boot: # mount -t jffs2 /dev/mtdblock3 /mnt/ [ 19.789306] jffs2: CLEANMARKER node found at 0x00000000 has totlen 0xc != normal 0x0 [ 19.810455] jffs2: CLEANMARKER node found at 0x00020000 has totlen 0xc != normal 0x0 [ 19.850860] jffs2: notice: (802) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. # cd /mnt/ # ls MD5SUMS foo10 foo3 foo5 foo7 foo9 foo1 foo2 foo4 foo6 foo8 # md5sum -c MD5SUMS foo1: OK foo10: OK foo2: OK foo3: OK foo4: OK foo5: OK foo6: OK foo7: OK foo8: OK foo9: OK Best regards, Thomas -- Thomas Petazzoni, CTO, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
