I am trying to get a custom CF card working with Linux 2.6.20.
I have an older driver for it that purportedly worked at some time
long ago
that almost certainly needs updated.
I can build and load the driver, but it does not seem to get glued
to the card.
I get pccard: messages in syslog recognizing the addition and
removal of the card.
pccardctl status knows a 3.3v 16bit PC-card is in socket 0
no other pccardctl commands seem to be aware even that the card is
present
cat /sys/bus/pcmcia/devices/*/* shows nothing
cat /sys/class/pcmcia_socket/*/* yeilds
0x00000100 - 0x000001ff
0x00000210 - 0x000003af
0x000003e0 - 0x000004cf
0x000004d8 - 0x000004ff
0x00000820 - 0x000008ff
0x00000a00 - 0x00000aff
0x00000c00 - 0x00000cf7
0x00003000 - 0x00003fff
0x000c0000 - 0x000fffff
0xc2020000 - 0xc20fffff
yes
0x0438
on
16-bit
3.3V
3.3V
3.3V
A clue about how to glue the driver to the card would be appreciated
Also what existing pcmcia driver would serve as a fairly
uptodate reference for a device with IO and memory ?
--
Dave Lynch DLA Systems
Software Development: Embedded Linux
717.627.3770 [EMAIL PROTECTED] http://www.dlasys.net
fax: 1.253.369.9244 Cell: 1.717.587.7774
Over 25 years' experience in platforms, languages, and technologies too
numerous to list.
"Any intelligent fool can make things bigger and more complex... It takes a
touch of genius - and a lot of courage to move in the opposite direction."
Albert Einstein
_______________________________________________
Linux PCMCIA reimplementation list
http://lists.infradead.org/mailman/listinfo/linux-pcmcia
