hi, One of our servers seems to have had some kind of SCSI failure, on booting it's currently hanging after these messages: SCSI subsystem initialized megasas: 00.00.04.08-RH2 Tues. May 5, 11:41:51 PST 2009 megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0 ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 78 (level, low) -> IRQ 82 megasas: FW now in Ready state scsi0 : LSI SAS based MegaRAID driver Vendor: FUJITSU Model: MBA3147RC Rev: D305 Type: Direct-Access ANSI SCSI revision: 05 VEXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs warning (device sda8): ext3_clear_journal_err: Filesystem error recorded from previous mount: IO failure EXT3-fs warning (device sda8): ext3_clear_journal_err: Marking fs in need of filesystem check. EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. type=1404 audit(1257582244.788:2): selinux=0 auid=4294967295 ses=4294967295
This is a PE2950 running CentOS 5.3 with 6 disks in 3x RAID-1. I'd expect to see a few more disks and the PERC5 and backplane in the list. Anyone seen this happen or can suggests what to look at next before I make a site visit / call a dell engineer? cheers, Barnaby _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
