I just installed Centos 5.2 / OMSA 5.5.0 on a Dell 1850 with Perc4i. The 2 internal drives are Raid 1, "Omreport storage controller" reports "degraded" but the vdisks and pdisks are all "OK". Is this normal? Did I forget to go into the BIOS and set something to make the controller rebuild automatically?
Thanks -W Sanders http://wsanders.net # omreport storage controller Controller PERC 4e/Si (Embedded) ... State : Degraded # omreport storage vdisk List of Virtual Disks in the System ... Status : Ok Name : Virtual Disk 0 State : Ready # omreport storage pdisk controller=0 List of Physical Disks on Controller PERC 4e/Si (Embedded) ... ID : 0:0 Status : Ok Name : Physical Disk 0:0 State : Online Failure Predicted : No Progress : Not Applicable ... ID : 0:1 Status : Ok Name : Physical Disk 0:1 State : Online Failure Predicted : No Progress : Not Applicable _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
